Head-Fi.org › Forums › Equipment Forums › Headphone Amps (full-size) › Woo WA2 Tube Rolling Recommendations
New Posts  All Forums:Forum Nav:

Woo WA2 Tube Rolling Recommendations

post #1 of 388
Thread Starter 
Hi All,

I recently took delivery of a Woo Audio WA2 amplifier. I am enjoying it immensely (full review in the pipelines) and although it is still running in - Jack recommended +/- 200 hours - I am doing some preliminary research into possible tube rolling adventures.

The amp uses a pair of driver tubes, a pair of preamp tubes and a pair of rectifiers, and tube rolling options seem to be as follows:

Power: 6080(WA/WB/WC), 5998/5998A, 7236, 6AS7G/6AS7GA

Preamp: 6922/E88CC, 6DJ8/ECC88, 7308

Rectifier: EZ80/6V4

From what I have read and in emails from Woo Audio, I believe that the most significant affect on the sound would come from rolling the power tubes; less so from the preamps tubes and even less so from the rectifiers - would you guys concur?

Also, what would you suggest as a starting point in the tube rolling adventure with this amps - specifically the power tubes? What I would want to achieve is a warm/lush sound, but quite open and extended. That is, not neutral/cold, but also not too euphonic, rolled off or closed in (small soundstage).

Any shared experiences in tube rolling with this amp and/or the above tube types would be most welcome! But of course a caveat - would prefer to start with a reasonable budget ($50-$100) so will be avoiding $200 Tung-Sol 5998s or $400 WE421A's

Cheers
X
post #2 of 388
Hi X

After reading several of your posts and the posts in the WA2 mod thread, I decided to take the plunge and recently ordered the WA2.

One power tube that is not liked very much here is the 6H13C. It has a warm, lush sound. I like it with Beyers and Grados. The JAN CRC 6AS7G is also one that I personally like. Nice detail, very balanced. Have not tried the 7236, but from what I have read from other threads, it is excellent.

The 5998s are that expensive already? Freakin' incredible...I bought mine about 6 months ago for $35 each.

I also have been looking around for some 6DJ8s, 6922s and see what options there are for EZ80.

From the looks of it, I believe there will be some fun times ahead...
post #3 of 388
Power:

I'm currently using the Tung-Sol 5998, I'm generally happy with them. I heard the Cetron/Tung-Sol 7236 are also very good (more neutral sounding?). As for the Western Electric 421A, I don't think I'll be getting them.

Preamp:

I'm using the Bugle Boy & the Orange Globe. They each have their own strength and weakness, I like them both. My next upgrade will most likely be the PQ or the Tungsram 6922 (supposedly they are similar to the PQ).
post #4 of 388
Thread Starter 
Thanks for the tips thus far! I have also been looking at the RCA-CRC 6AS7G (black plate) - apparently quite rounded and warm but not soft at the extremes. The others which come to mind are the Bendix 6080's which I've seen go for around $80-100 for a NOS pair.

Jack suggested that for the full-bodied, warmer signature I should look at the 6080's first, 6AS7G's a close second. He said the 5998's excel at detail and control, though are a lot more neutral (can be cold in the wrong setup).

For preamp tubes I have been eyeing the Tesla E88CC Gold Pins (60's-70's Czech production) which are said to be very good and not that costly. Haven't looked too much into rectifiers (I believe they have the least affect on the WA2's sound).
post #5 of 388
The WE 421a is a total waste of money - it is just a Tung Sol 5998 rebranded - nothing more. The TS 5998 on the other hand are terrific (and should be $50 each or less).

My very favorite of all the 6AS7G types though is the GEC A1834/6AS7G, but these are hard to find. I also like Tung-Sol black-plate, halo-getter 6AS7G - nice tubes.

My favorite affordable 6DJ8 are the JAN-Sylvania. My favorite expensive 6DJ8 are the Amperex (Holland) Bugle Boy.

No experience with that rectifier tube.
post #6 of 388
Thread Starter 
Thanks Skylab...the astronomic pricing of the WE421A are more an amusement to me than anything else . I've tried to get my hands on some Tung Sol 5998's but they are few and far between; when I have seen them they are usually at around $150-$200 for a NOS pair.

Anyone know/have experience with the Raytheon CK6080?

By the way, a tube rolling tip I just got from Jack which should be noted - tubes that have large bases (1/4" larger than the stock GE 6AS7G or Tung Sol 5998) would not fit fully into the socket.

Anyone know if the base diameter is determined by tube type (e.g., all 6080WB's have the same diameter) or is it dependant on manufacturer (e.g., two 6080WB's by different manufactures may have different base diameters)?

Cheers
X
post #7 of 388
Quote:
Originally Posted by xenithon View Post
By the way, a tube rolling tip I just got from Jack which should be noted - tubes that have large bases (1/4" larger than the stock GE 6AS7G or Tung Sol 5998) would not fit fully into the socket.

Cheers
X

Thanks X

After reading this I took a closer look and it does look a bit tight for the thicker bases, especially the metal ones. I have a pair of Bendix 6080s that I was really looking forward to use in there.

Did he advise any in specific that he has found not to fit in there?

Thanks

Jes
post #8 of 388
Thread Starter 
Not yet, no. I did follow up asking if this may be an issue dependant on tube type or rather on manufacturer (as above). If I get any feedback regarding problematic types I'll post it here.

Do you know what the diameter of the stock 6AS7G or 5998 is and if it is a standard of sorts?
post #9 of 388
Here is a data sheet electron Tube Data sheets - 6

I guess anywhere from 1 3/8" (6AS7G), 1 23/32" (6080), 1 5/8" (7236).....
post #10 of 388
Yes, the 6AS7G and 5998 use a standard Octal base - same as all octals like 6SN7/6SL7, etc.
post #11 of 388
Thread Starter 
Do you guys find that the more significant effect on sound is from the power tubes, or from the preamp tubes?

I have my eyes on some Amperex orange globe 6DJ8's. Anyone know what the going rate would pair for a NOS matched pair (as pictured below)? Also, anyone know what instrument grade tubes means?

post #12 of 388
I suspect you've seen this, but the effect of tube changes is part of the discussion here: http://www.head-fi.org/forums/f5/woo...9/#post5162111
post #13 of 388
Thread Starter 
Hi there. Yes I have been keeping an eye on that thread. I am particularly interested though in which tubes people have found have the most significant effect on the WA2 (that is - preamp, power or rectifier tubes).
post #14 of 388
Thread Starter 
BUMP.....to those who own the WA2 and have done some tube rolling, did you find more of a significant impact rolling the preamp tubes or the power tubes?

Cheers
X
post #15 of 388
This doesn't answer your question, xenithon about which tube roll has a greater effect, but here's a link to a nice overview of different 6922/6dj8/7302 tubes that work with the WA2 and their characteristic sound. (Joe's Tube Lore)
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Headphone Amps (full-size)
Head-Fi.org › Forums › Equipment Forums › Headphone Amps (full-size) › Woo WA2 Tube Rolling Recommendations