The player does not connect in USB DAC mode to phones C24 and C23 - message - high load, requires an external power source, connects to A53. Sadness(

Good afternoon, tell me how to do this, I am very far from programming(

I returned to 1.1 because the battery on version 1.2 began to drain quickly, resetting to factory settings does not help.

the clip

Tell me, when listening through the 4.4 connector, when moving to the next track, a background noise effect occurs (crackling - like the effect of leakage in capacitors) or when pausing, such noise is more clearly audible on the Shuoer S12 Pro and FiiO FD3 Pro. There is no such thing on FiiO...

Hi all. A strange phenomenon on this player after updating to version 1.1, via Bluetooth it stopped playing music with a high bitrate - 32/384 (WAV), 16/44, 24/96, 24/192 Flac plays normally as on the old firmware. Error - 12 appears on the screen. Everything else works fine.

It’s just not possible to measure the output impedance with a multimeter (definition from marketers), simply - resistance is measured under certain electrical conditions (physically conditional)!, and at the same time there are many accompanying factors... Therefore, the manufacturer indicates...

There is m1s (and it is just as buggy - the software problem is the main problem) but there is no r3, but there is r2. And measuring with a multimeter through the correct one! cable at a sound level of 20% per m1 impedance 0.8 ohm - more correct information)). That's why I asked you. M1 does not...

Of course, you overly indicated the output impedance of 1.3 Ohm for SE, where does this value come from if you have R2 II 0.5 Ohm for SE - I do not believe! - you have an error somewhere.

How to enable USB Audio 2.0, I did not find such a setting on the player.

Without the Shanling USB Driver 5.20, Win 11 does not see m1s in usb DAC mode. The usb DAC mode is enabled in the player settings, but for some reason, Windows first shows the contents of the memory card folders - as in usb mode, and then the usb DAC mode starts on the player itself. I changed...

Arrived DUNU S&S (Stage & Studio), size L was suitable for me, but there is a big problem - they greatly lift up the high frequencies and slightly distort female vocals. But the stage becomes wider, and bass instruments sound more realistic. My choice is simple ear pads, here I will clarify not...

Good afternoon. Installed and checked, now 32/384 files do not freeze or slow down. There is a firmware improvement. Bluetooth is the same, everything is stable.

I take back my words (except for the attachments included in the kit - they did not suit me at all), I found several Sony attachments from old headphones, their shape is very similar to DUNU S&S (Stage & Studio) - the hiss disappeared (the driver of the armature no longer sticks out on complex...

The attachments included in the kit are poorly adapted; So far I have used the SpinFit CP360 - they are the ones that remain in the sound guide. The sound on the balanced cable is more or less acceptable. But the way they reproduce instrument-rich music - especially in rock compositions - is...

SHANLING Clip Case for M0 PRO Music Player aliexpress.com - SHANLING Official Store

Доброго дня, посилання на файли 32/384. Файл завеликий для пошти. WV і WAV файли в папці.

The player freezes completely when playing WAV 32/384 files, music plays, but it is impossible to change the sound or turn off playback, only turn off the player. It behaves the same way with FLAC 32/384! And the files - wv "WAVE - 32/384 do not see at all!

This works with Mifi 07 photo 1, and with Shanling MTW200 in photo 2, reconnection does not automatically occur, only through the bluetooth menu. Reset on the headphones performed!

Teach the player (bluetooth chip - I wonder what chip is in the player?) to be friends with chips from Qualcomm QCC, because MTW 200 and 300 (Qualcomm QCC3040) are headphones of your production! Mifo 07 does not connect at all, the player sees it but there is no connection.

The situation is the same, there is no automatic reconnection of the player via bluetooth with MTW200 and 300, MTW100, as on firmware 1.3, is automatically connected. There is no solution to the problem (.

How long will a normal software update take, so many small errors (in each control unit, switching inconsistencies and failures), it seems that you ordered software from different sources ...

Thank you

On one forum posted the firmware for the player, but off the site it is not - M0Pro_20230228_V1.3 - !!! this is the same firmware that is currently installed in the player (

I checked the operation in the USB DAC mode, the output is limited to 24 bit / 192 kHz, the DSD does not process at all, unless the PSM mode is enabled in the settings of the Fobar 2000 (outputs 24/192). Whether this is a flaw in the firmware or a conscious limitation in the USB DAC mode, it is...