Search results for query: *
- Users: Dnaudio
- Order by date
-
$60 and under Over-ear closed back
Update on the HSR-1000. My headphones showed up on Friday in the mail. First impressions: I was very impressed with the build quality of the headphones. They seem to be build with pretty quality materials and seem to be very durable. The have a lot of flex which i like because it makes...- Dnaudio
- Post #14
- Forum: Introductions, Help and Recommendations
-
$60 and under Over-ear closed back
Just ordered the Gemini headphones, i'l report back after i get them to say how they are. Thanks Guys- Dnaudio
- Post #9
- Forum: Introductions, Help and Recommendations
-
$60 and under Over-ear closed back
Some of the headphones i was looking at were CAS Session WH510 and Shure SRH-240A- Dnaudio
- Post #7
- Forum: Introductions, Help and Recommendations
-
$60 and under Over-ear closed back
The HA-S680's look really nice but someone said they aren't very good at isolation because of their bass port. I really want something that focuses on comfort and noise isolation.- Dnaudio
- Post #5
- Forum: Introductions, Help and Recommendations
-
$60 and under Over-ear closed back
I don't know i kind of found if fishy that all the Sennheisers clamped so much, i'm guessing the reason the QC15s didn't clamp that much were because they were display models and got stretched out. I really liked the QC15's they just fit right even though they were pretty small, plus they had...- Dnaudio
- Post #4
- Forum: Introductions, Help and Recommendations
-
$60 and under Over-ear closed back
I've been looking for a while for a new pair of headphones and i've finally looked around enough to actually post something. I am looking for a large pair of over-ear headphones, with high noise cancellation, that are extremely comfortable and have a closed back design. Last year i did research...- Dnaudio
- Thread
- Replies: 14
- Forum: Introductions, Help and Recommendations
-
Mcoy and lm386 Amp problems
All i have right now is the breadboard prototype that i made. It will be pretty hard to trace routes of that but you still want a picture i can upload one.- Dnaudio
- Post #18
- Forum: DIY (Do-It-Yourself) Discussions
-
Mcoy and lm386 Amp problems
Bump, can anyone give me an idea of what to do otherwise i'm going to order a new op-amp and try yet again- Dnaudio
- Post #16
- Forum: DIY (Do-It-Yourself) Discussions
-
Cheap Headphones :Good with Amp
I ordered the JVC S-500 and received them today. I am very happy with them, only thing that i didn't realize is that they aren't over-ear they are on-ear headphones. They sound really good and can't wait till i get the problems with my headphones resolved so i can try them with the amp.- Dnaudio
- Post #13
- Forum: Headphones (full-size)
-
Mcoy and lm386 Amp problems
When i turned the gain down the sound became more distorted, in other words, the "wattery" sound gets more intense, when i think about it, the highs sound good and bass sound good but there is no mid at all. I've tried many different output resistors. Any other suggestions.- Dnaudio
- Post #15
- Forum: DIY (Do-It-Yourself) Discussions
-
Mcoy and lm386 Amp problems
I'm sorry i miss typed yet again or just failed to mention, i have had a resistor on the output in series to increase the impedance of the speaker, the speaker is a small test speakers used in alot of cheap kits. Also correct me if I'm wrong but isn't doesn't a smaller resistance= a smaller load...- Dnaudio
- Post #13
- Forum: DIY (Do-It-Yourself) Discussions
-
Mcoy and lm386 Amp problems
i did try a higher impedance, it sounded better but then turning the gain down made the amp sound worse, the increase of impedance worked slightly but it also exponentially decreased the volume output.- Dnaudio
- Post #11
- Forum: DIY (Do-It-Yourself) Discussions
-
Mcoy and lm386 Amp problems
Yes i did the troubleshoot, without a resistor on the output all i get is popping noices, Gain is set to 11 i have also tried different gains but nothing helped. Checked the chips, they are fine. I'm using two Opa227 one for each channel. im using a 8 ohm speaker for testing.- Dnaudio
- Post #9
- Forum: DIY (Do-It-Yourself) Discussions
-
Mcoy and lm386 Amp problems
i built the cmoy amp on a breadboard today and got to almost play right, however, im having problems with cutting out, and it sounds like typical brocken cable "water" sound, sloshly like. I messed with the power circut caps and it sounds much better but it still sounds way off- Dnaudio
- Post #7
- Forum: DIY (Do-It-Yourself) Discussions
-
Mcoy and lm386 Amp problems
Sorry i typed wrong, i meant the cmoy amp. But the other amp i made i made on a breadboard and took it apart. im going to build the cmoy amp on bradboard and see if it changes any. I'm going to see if it has the same problem on a breadboard.- Dnaudio
- Post #5
- Forum: DIY (Do-It-Yourself) Discussions
-
Mcoy and lm386 Amp problems
I have attemped to build 3 headphone amps now and every single one has had the exact same problem. After everything is hooked up and everything is soddered down i get a huge hiss in the output . I have messed around with the grounds and everything and have yet to do anything that has fixed it. I...- Dnaudio
- Thread
- Replies: 17
- Forum: DIY (Do-It-Yourself) Discussions
-
Cheap Headphones :Good with Amp
I was acually quite interested in these, however being a japenese import i feel like they would be harder to get my hands on. Any other people want to vouch for them and whether or not they could handle being pushed by an amp.- Dnaudio
- Post #9
- Forum: Headphones (full-size)
-
Cheap Headphones :Good with Amp
I completely understand that beats by dre suck, however i'm impressed with the fit of them and they have decent sounds. If they happened to be in the $40 price range i would surely get them but they are no where near the quality or a pair or grados or audio technicas. That being said what does...- Dnaudio
- Post #8
- Forum: Headphones (full-size)
-
Cheap Headphones :Good with Amp
The At-M50's cost too much for me, plus i still don't think they would be right for me they don't nessarilly have that much bass.- Dnaudio
- Post #5
- Forum: Headphones (full-size)
-
Cheap Headphones :Good with Amp
yah i don't know if they are for me, any other suggestions- Dnaudio
- Post #3
- Forum: Headphones (full-size)
-
Cheap Headphones :Good with Amp
Hi i'm new here i've been looking around for headphone information and this looked like a great place to get information and preferences. I just bought a cheap pair of headphones but they distort at higher levels and they are falling apart on me so i am looking for another pair yet again. I am...- Dnaudio
- Thread
- audio-technica-ath-m30-professional-headphones audio-technica-ath-m35-studio-headphones
- Replies: 12
- Forum: Headphones (full-size)