Search results for query: *
- Users: GoldenSound
- Order by date
-
HiFiMan Susvara
Can finally talk about this now that it's announced :D I was able to try these for a short time at Munich High-End this year. I've always been a big fan of the original Susvara, with it being essentially my benchmark headphone (excluding the everest priced stuff like HE1/Aperio). The Susvara...- GoldenSound
- Post #26,252
- Forum: High-end Audio Forum
-
Ferrum WANDLA - Impressions Thread
If wanting to bi amp best option would be to use an xlr splitter cable. Just make sure the amps are not unusually low input impedance and you're good to go- GoldenSound
- Post #1,238
- Forum: Dedicated Source Components
-
Ferrum WANDLA - Impressions Thread
Pretty much all dacs will have 2x the voltage on balanced output unless they had quite an unorthodox dual output stage situation with different voltages. Wandla outputs 10V on XLR and 5V on RCA without any vol control. On the GSE it's about 9V XLR and 4.5V RCA. Though you can use the voltage...- GoldenSound
- Post #1,236
- Forum: Dedicated Source Components
-
Ferrum WANDLA - Impressions Thread
It can't be disabled Yep, just make sure that the amps don't have an unusually low input impedance, also keep both amps ON when playing. Some amps load the inputs when turned off and this could cause additional distortion including to the 2nd amp- GoldenSound
- Post #1,232
- Forum: Dedicated Source Components
-
Weiss Engineering DAC50x (DAC501 and DAC502) Review
Unfortunately not. IMO they absolutely should, and most professional oriented products as well as many high end DACS (RME, Benchmark, Chord, Ferrum etc) all have appropriate digital headroom management. BUT, many manufacturers like Topping, SMSL, Gustard that market heavily based on their SINAD...- GoldenSound
- Post #416
- Forum: High-end Audio Forum
-
Weiss Engineering DAC50x (DAC501 and DAC502) Review
Because as said, if you pad the Msb, you end up attenuating everything by 48dB- GoldenSound
- Post #414
- Forum: High-end Audio Forum
-
Weiss Engineering DAC50x (DAC501 and DAC502) Review
This is an example of intersample overs. The green squares represent the PCM samples. The green line represents the actual waveform once reconstructed: You can see that despite all the samples themselves being at or below 0dBfs, the waveform goes above it. To make it clearer here's the same...- GoldenSound
- Post #411
- Forum: High-end Audio Forum
-
Weiss Engineering DAC50x (DAC501 and DAC502) Review
The bit depth doesn't matter. max value at 16 bit is still max value at 24, 32 or 64 bit. Otherwise when playing 24 bit content you'd suddenly find everything was about 48dB quieter than 16 bit The issue is that if the source material has content that when reconstructed exceeds 0dBfs, your DAC...- GoldenSound
- Post #409
- Forum: High-end Audio Forum
-
Weiss Engineering DAC50x (DAC501 and DAC502) Review
I've not had a chance to test the 501/502 at home so can't say. Though analog attenuation wouldn't address the issue. It's the DAC itself that is clipping and once it's clipped that's it- GoldenSound
- Post #406
- Forum: High-end Audio Forum
-
Holo Audio May DAC Speculation
In that case it's likely a network issue. How is your network set up? Due to some of the underlying protocols roon relies on if you have an unorthodox setup or are running via a vpn such as tailscale it may not see or be able to access devices even if the roon remote client itself is able to...- GoldenSound
- Post #1,316
- Forum: Dedicated Source Components
-
Holo Audio May DAC Speculation
Is your pc seeing the DAC at all? Probably best first to determine if this is a roon issue or a hardware/setup issue- GoldenSound
- Post #1,314
- Forum: Dedicated Source Components
-
Holo Audio May DAC Speculation
Make sure usb input is selected on the may. If it's set to i2s or coax or something the USB input is disabled entirely and the connected pc won't see it- GoldenSound
- Post #1,305
- Forum: Dedicated Source Components
-
Ferrum WANDLA - Impressions Thread
If anyone wants a particularly good song to try the spatial enhancement with, give this a go: https://song.link/gb/i/1710738926- GoldenSound
- Post #1,218
- Forum: Dedicated Source Components
-
Ferrum WANDLA - Impressions Thread
Yeah if you buy a brand new stock Wandla it'll have the voltage divider. If the dealer has old stock it wont- GoldenSound
- Post #1,215
- Forum: Dedicated Source Components
-
Ferrum WANDLA - Impressions Thread
The upgrade will give you the spatial enhancement, impact+, tube mode, and the changes made to the DAC operation itself. Though you won't get the voltage divider option as that is a new hardware aspect.- GoldenSound
- Post #1,213
- Forum: Dedicated Source Components
-
Ferrum WANDLA - Impressions Thread
:eyes: 465 is pretty damn fantastic- GoldenSound
- Post #1,210
- Forum: Dedicated Source Components
-
Ferrum WANDLA - Impressions Thread
Yep! The spatial enhancement has separate speaker and headphone modes (I use speakers a lot myself, increasingly so these days) And the tube mode and impact+ mode are effectively 'playback method agnostic' and work great through both mediums- GoldenSound
- Post #1,208
- Forum: Dedicated Source Components
-
Ferrum WANDLA - Impressions Thread
That's the intent yep! It doesn't alter FR at all, but adds some extra even order harmonics which make things a little warmer/weightier sounding overall. It's intentionally subtle so that it's not a party trick you use for 3 songs then turn off forever, but for either tracks or headphones that...- GoldenSound
- Post #1,206
- Forum: Dedicated Source Components
-
Ferrum WANDLA - Impressions Thread
For EU folks, the Ferrum order page is available here: https://ferrum.audio/product/wandla-goldensound-edition/- GoldenSound
- Post #1,205
- Forum: Dedicated Source Components
-
Ferrum WANDLA - Impressions Thread
Shoot a message over to customer service and they should be able to confirm status of your order. Not all the units went out on the same day though so it could just be that- GoldenSound
- Post #1,188
- Forum: Dedicated Source Components
-
Ferrum WANDLA - Impressions Thread
Really glad you're enjoying it! If you've not done so yet, I'd strongly recommend trying the track "Closer" by Lemaitre. During the main chorus/busy part, try switching spatial enhancement on, then off again after a few seconds and hear the difference. That particular track has been one of...- GoldenSound
- Post #1,185
- Forum: Dedicated Source Components
-
Ferrum WANDLA GoldenSound Edition - Pre-Orders are Live!
How's it sounding so far? :D- GoldenSound
- Post #93
- Forum: Sponsor Announcements and Deals
-
For Sale Holo May KTE
- Price
- 3400.00 GBP
- Condition
- Good
- Negotiability
- Or best offer
- Ships to
- Europe
Reluctantly selling my Holo May KTE due to needing to raise funds in a short timescale. This has been my personal favourite DAC for a very long time having tried a significant number of alternatives. Includes the DAC, Remote, Original Boxes, Interlink cable- GoldenSound
- Listing
- Comments: 0
- Category: DACs
-
Ferrum WANDLA - Impressions Thread
Oh, seems maybe they don't include the adapters with the elite. That's a bit of a shame, they do include them with the normal iPower and iPower X- GoldenSound
- Post #1,172
- Forum: Dedicated Source Components
-
Ferrum WANDLA - Impressions Thread
The iFi iPower PSUs should come with more adapters, there's usually 5 in the box including the negative pin one. If those weren't in yours sounds like you may have received a "Refurbished" unit rather than a new one- GoldenSound
- Post #1,170
- Forum: Dedicated Source Components