Head-Fi.org › Head Gear › Headphone Amplifiers › Desktop Amps › Ray Samuels Emmeline II The Raptor Headphone Amp

Ray Samuels Emmeline II The Raptor Headphone Amp

Posted

Pros: tight bass and good dynamics

Cons: output tubes supply limited(nos only)

 I have had my raptor for two and a half years with no reliabilty issues.The amplifier proper is very compact and lite weight so be aware it does not self anchor itself and is easy to move.The power supply is very substantial and is remotely locatable, it is tethered to the headphone amp by din type connector which securely twists in place on the amp module.

 The amplifier seems to be pretty powerful and is signatured fairly neutrally for a tube amplifier.The bass is pretty tight for a tube amp and the amp has good dynamics.The sound stage is pretty good with good depth portayal and good dimensionality.The noise floor of the amp is fairly quiet and low level resolution is pretty good.

 I have read that some people found the amp to sound more towards the solid state camp.I Could see how some people think that way because the amp sounds pretty neutral for a tubed amplifier.But I find the amp to be more three dimensional than the solid solid state amps I have heard.

 I have akg 701,grado rs1i and audeze lcd-2 phones in my collection and I find at least in my system that raptor seems to be synergetic with the rs1i phones.The match is pretty dimensional(which is apparently from what I have read not a strength of the grado) the raptor seems to produce fairly dimensional sound from the grados.If anyone is looking for good amp to drive the rs1i I think you should check out the raptor I think you would not be disappointed.

 I find the raptor to be less synergetic with the akg 701.The 701 is a fairly difficult phone to drive and I find that even the audezes are easier to drive.

 These days I do not use the 701 phones very much especially since I got my audeze lcd2 rev2 phones.

 I Imho believe that the akg needs a stout amplifier to wrest the best sound out of the 701.I did have some success with a shanling hybid tube amp(shanling ph300) which seemed to pair well with the 701 but I had some reliabilty and service issues with shanling and its distributors music hall so I returned the amp. I think having a solid state amp section with a tubed input stage seemed to balance out the akgs analytical sound signature.The pairing made listening sessions less fatigueing.

 Well I am getting away from my raptor review.
 Using the raptor with the audeze lcd2 rev2 makes for a pretty enjoyable session.The amp has enough drive capabilty but the levels are somewhat higher than for the rs1i.A good level was obtained around 10 to 11 oclock for most recordings.
 The sound with the raptor was somewhat less elicit with the audezes than those phones are with my burson ha160 but the pairing was fairly enjoyable,The burson mates particularly well with the audeze lcd rev2 Imho and at the price is a very cost effecttive match for the audezes.

  I must add that I am using a kubala sosna emotion power cord on the raptor and that I have upgrade the stock fuse in the amp with a hifi tuning gold fuse in my amp.To check for fuse size call ray samuels and he will let you know what the proper fuse value is for the amp.The fuse and power cord upgrade significanty improve the amplifiers performance.The noise floor drops and low level information is more apparent and things just tighten up and the sound becomes more dynamic.The kubala cord is probably way over the top(I just used it because I alredy had one) but may I suggest the emotiva power cord from emotiva on line.I purchased one very recently and have found the power cord to perform way beyond its

modest price.

  In addendum to my previous review I have to reassess my findings about the amp.But my reassessment is much for the better.I have found the emotiva power cable to be much better suited to the raptor than my kubala sosna emotion power cable(amazing considering the emotion costs the dearer end of a thousand dollars and the emotiva power cord costed me only eighty dollars!!!).I have also upgraded the fuse from the hifi tuning gold fuse to the hifi tuning supreme fuse which in conjunction with the change of power cord have greatly elevated my opinion of the raptor otl amp.
 The amp now has much more vivid sound without being overly analytical sounding.The amplifier has a very liquid sound signature that i find very much more palpable than it was before.The sound is very spacious with a large soundstage that is more dimensional.The dynamics are also much improved.The low level detail that I am hearing is so great that I can regularly discern extemely low level information during the most silent moments on audiophile recordings (rustling,shuffling feet, artists joking around etc.)

The sound from this amp especially with my grado rs1i phones is very realistic and very lifelike i have never heard the grados sound so lifelike before.I also tried it again with my akg 701s and it seems to work somewhat better with them now but i still prefer the amp with the grado rs1is.

 I have not tried the amp with my lcd2 rev2 because my headphone cable went bad and while I have received a replacement cable for them i am so utterly rapt with the raptors performance with my rs1is I have been in no hurry to start the cable break in process with the lcd2s.I guess in due time I will eventually start breaking in the audeze cabling and then try it with the raptor once the cable is broken in.

  This is another addendum to my previous reviews. It has as been awhile longer and I recently purchased a cable pro reverie power cable for another component but being curious I thought I would try it with my raptor to see how it sounded. Wow!!!!!!!!!!!!!!!!!!!! I thought the raptor was pretty good at sound stage before but it is an entire different league now in that area. I listened to it till almost 4 oclock this morning and I was just amazed at the palpability that this power cord brings to the sound of the raptor. I listened to a vintage  copy of frank sinatras only the lonely cd on capitol and I could swear I was listening to him in the flesh it was that good.

  It has made such a difference that I consider the reverie power cable an essential must have tweak for raptor owners. You simply have not heard the raptor till you upgrade the cable to the cable pro reverie power cable.

  For any owners who take my suggestion to heart there is a thirty day free trial period from cable pro. So what have you got to lose but be patient like all cables they take a while to flesh in but with maybe twenty or thirty hours you should hear a noticeable difference in the raptors performance.

  I would appreciate any comments from anyone who takes my lead and tries the reverie power cord on their raptor. it has been the better part of three years now and I am still finding things out about this exceptional amp.

 

 

 

 

 

 

9

Ray Samuels Emmeline II The Raptor Headphone Amp
Description:

The Raptor was designed with two goals in mind, first an amp with a small foot prints, secondly an amp capable of driving any headphones available in the high end whether being high or low impedance. The Raptor is an output transformer less amp “OTL”; it is designed using a single 12AU7, a triode, as input/gain for both channels & two powerful driver tubes “5687” one for each channel, in a SRPP configuration to drive the load. The parts used in the construction of the amp section are audiophile quality components, hand selected and matched to provide a perfect balance between the two channels. All resistors are Holco, 1 watt film resistors with .5% accuracy, the caps are “Musicap” pure polypropylene by Hovland. All power resistors are military grade with 1% tolerance by Vishay. The tube sockets are ceramics with Gold contacts soldered to a military spec 2 oz FR4 printed circuit board with a military specs solder. All signal lanes & power lanes have been routed & isolated from each others with ground lanes & ground patches to lower the floor noise to a complete black silence. The amp chassis is shielded with DC ground to stop any RF signals from disturbing the components. Two sets of RCA inputs, for two sources, are provided on the back panel of the Raptor, switching between the two sources is accomplished via toggle switch, located on the back panel also. 1/4 inch headphone jack is located on the left side of the front panel, on the right of that red LEDs circle is illuminating the Volume control knob. The Amp chassis is connected to the external power supply chassis through 3 conductors, 16AWG, 600V shielded cable. The DC cable is terminated by using an AMP connector with locking ring. The power chassis houses a super power supply, with a custom built, PLITRON, toroidal transformer designed to meet our specs in regard to size, voltage and current requirement. The power supply is dead quite. Two stages of rectifications follow the full wave bridge rectifier, each stage with current limiting 1% Vishay power resistors, these two stages slow down the current hungry caps, allowing the filament voltage to get to the tube first before the plate voltage rises to the required voltage. A high voltage regulator is implemented in the power supply to keep the voltage steady no matter how the AC voltage fluctuates. As to the filament voltage, a very powerful, compact universal switching power supply is used with 12VDC, 3.4 amp of current. It makes the amp flexible to work in any country no matter what the voltage might be. The power supply uses high grade Panasonic power capacitors rated at 105C. The printed circuit board is designed to circulate the air internally to keep the power supply cool. Again Military grade FR4 2oz printed circuit board is used with military specs, 1% tolerance, power resistors, both the amp and the power supply are hand crafted, with hand selected components, perfectly matched between the left and the right channel for an accurate sound balance production. The power supply is shielded with AC ground, red LED in the front panel indicated that the amp is turned on. The on/off switch is installed on the back panel of the power supply. Few warning are silk screened on the top of the power supply indicating the risk of opening the top cover. Also instructions not to block the top and the bottom vents of the power supply, the last warning is not to place the amp section on top of the power supply. The Raptor has three years, full warranty parts and labor, tubes 90 days, that is transferable to second or third owner no question asked. h2. Specifications * Input impedance 50K * Frequency response 10-300k * Total harmonic distortion around .09% * Output impedance 32-2000 ohms * Gain around 14 * Tube compliment, one12AU7 for input * Driver tubes two 5687 as buffers. h2. Dimensions (Amp Section) * Front, left to right, 5.75” * Depth, front to back, 4.25” * Height, no tubes, 2.00” * Height with tubes, 4.00” h2. Dimensions (Power supply) * Front, left to right, 8.00” * Depth, front to back, 5.75” * Height, 3.00” * Weight around 8 pounds.

Details:
DetailValue
Models:
Model Name/TypeMPNEAN/UPC
Head-Fi.org › Head Gear › Headphone Amplifiers › Desktop Amps › Ray Samuels Emmeline II The Raptor Headphone Amp