Recent content by tonybuild
-
Home-Made IEMs
How they fit?im having hard time putting 20 mm lol.- tonybuild
- Post #16,088
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Does yellow filter affects on dB as well ? I guess ill keep 16 mm . im still looking for soft and pleasant bass sound with lots of air.- tonybuild
- Post #16,084
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Hi guys. Someone said to make tubes for HODVTEC as long you can . Like maximum length. I usually make 16 mm ,but i can do 20 mm . Is it really gives you something? I cant find that post about that .- tonybuild
- Post #16,081
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Hi guys . Please can any one tell me the right way of measuring a ciem with microphone? Ill show you some pictures, please tell me, which one is more accurate. On the first picture, i placed it really close . I asked, because first example gave me different frequency response from the second...- tonybuild
- Post #16,067
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
This is short video of making it. Dont pay attention on the drivers On the video . In the beginning, I was experimenting with twfk. But I end up with sonion 2389d- tonybuild
- Post #16,061
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
I mixed Egger with white resin pigment. I bought it in the Michael’s store .- tonybuild
- Post #16,060
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Hi again, in this model ( white and wood ) i use sonion 2389D and sonion 38d1 woofer . I wired 5ohm resistor and 22 cap on one of the 2389(no center pad), and 2.2 cap on the other 2389(no center pad) . On the woofer i wired 20 ohm resister reversed . 2389d,12 mm tube with green damp at 3-4...- tonybuild
- Post #16,059
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
I will post today or tomorrow- tonybuild
- Post #16,044
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Do You mean how i made it,or what i used ?- tonybuild
- Post #16,039
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
This is my 4 drivers that i told you guys , i just finished today:)- tonybuild
- Post #16,036
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Uhh nice ,look at you 👍 . It got some futuristic vibe. how long you cured it under the lamp?- tonybuild
- Post #16,035
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Yeah, i actually wanted to order them . Can get better results with E50dt ?- tonybuild
- Post #16,033
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
O nice . May be i can use Raq as a low and mid . Guys,post some pics of your iems . Im going to finish my New 4 driver setup this week with some wood face plates,and ill post it :)- tonybuild
- Post #16,031
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Thank you I like the sound of it . Also,it was loud lil bit and i put there 5R on one of the 2389, and now i got 2khz dent lol . I like to hear details without sharpness ,also it can be my green damp. Next time ill try 3 uf for highs . Also, at this point ive tried nothing besides the...- tonybuild
- Post #16,029
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
This is my latest fr graph for the 4 drivers setup . It got sonion 38 and sonion 2389d . I reversed polarity on woofer ,because they were canceling each other . And no center pad, i liked the sound of 22 uf on one of the 2389, and 2.2 uf on other one of 2389 . All caps i ran with positive wire...- tonybuild
- Post #16,027
- Forum: DIY (Do-It-Yourself) Discussions