ForceMajeure's latest activity
-
ForceMajeure replied to the thread What Are You Listening To Right Now?.The new single from Alt-J reminds me a bit of Status Quo-Pictures of Matchstick Men -
ForceMajeure replied to the thread Home-Made IEMs.I just tested the 3d sketch your way. It works great. Connecting the 2 end dots of each profile and then adding spline points. This is...
-
-
1. Import STL. Mine is direct from the 3d scanning. 2. Use “T” to translate and align the impressions where you want to cut it. It is...
-
I used to do this but kind of forgot how to do it. I think I started off with recap. :) Here's a vid on how I did it.
-
ForceMajeure replied to the thread Home-Made IEMs.Technically you could just to get around a value you might like, listen and get an idea, but it's not recommended. Because nailing an...
-
ForceMajeure replied to the thread What Are You Listening To Right Now?.
-
ForceMajeure replied to the thread Home-Made IEMs.Ah one last thing I forgot to mention that might not be clear for folks that are completely new at this. When soldering a wire to a BA...
-
ForceMajeure replied to the thread Home-Made IEMs.Regarding soldering DD's BA's etc...The rule of thumb is simply not to spend time doing it. It Should be as fast as a tap so less than a...
-
ForceMajeure replied to the thread Home-Made IEMs.Take notes from that vid Regarding the material hardening time. it also depends on the ambient temperature and how old or new the...
-
ForceMajeure replied to the thread Home-Made IEMs.These aren't good enough for deep fit. Your canal lacks material. the cymba also look like it's lacking a bit, although you could get...
-
ForceMajeure replied to the thread Home-Made IEMs.You might want to consider introducing a wire between them, that way it'll be easier to fit this long thing inside the shell...
-
Lak, but I don't use Dreve. It yellows too much for my liking. I've been having good luck with Pro3dure, and I'm about to try some...
-
ForceMajeure replied to the thread Home-Made IEMs.Yes these capacitors should be ok and yes you can connect different resistor values to achieve 38ohms it's ok.
-
ForceMajeure replied to the thread Home-Made IEMs.No this is not the reason why many brands didn't use rc lowpass. an Lpad is a voltage divider, depending on implementation you could...
-
ForceMajeure replied to the thread Home-Made IEMs.Actually re-reading your post it seems you might be aware of the effect of different OI on your iem. Regardless, when you add/change...
