[IgeNeLL]

Hey people,

is it normal for the SP3k to be stuck in "scanning media" when a new SD card is inserted? And if so how long should it take.

I'm using a 512GB Samsung Pro Plus. Tried to format it with the DAP and also factory reset the DAP. I can navigate through the folders but seems like the indexing is never ending and the card is not even half full...

The card works perfectly and I've also successfully tried it with other DAPs....

You should reformat and copy to SD card using SP3000.

 

[damascato]

You should reformat and copy to SD card using SP3000.

Problem is that with Mac you need to use Android File Transfer, which miserably fails veeeery often...

 

[IgeNeLL]

Problem is that with Mac you need to use Android File Transfer, which miserably fails veeeery often...

You need to overcome this problem. No way out.
When upgrading to SP3000, I re use the card (1T) from Sp2k, it work flawlessly but sometime, the DAP not responding for unknow reason, reformat the card solve this issue.

 

[Chesty]

Problem is that with Mac you need to use Android File Transfer, which miserably fails veeeery often...

Android File Transfer is way too basic. For Mac users, I would recommend using Commander One PRO, which makes file transfer from Mac to DAP much easier.

 

[damascato]

Android File Transfer is way too basic. For Mac users, I would recommend using Commander One PRO, which makes file transfer from Mac to DAP much easier.

Straight to dap or just to SD taken out of the DAP?