[LaughMoreDaily]

If this thread has slowed/died down... I'm sorry to say Zishan stole the #1 budget DAP position from Walnut! Everyone is going Gah-gah over the Zishan DSD.

 

[Podster]

Someone had to do it, it's the nature of this hobby

 

[D0rk!n]

sadly zishan z1 thread is locked.

 

[Themilkman46290]

I still use my Walnut but the dsd does get the most attention now

 

[LaughMoreDaily]

sadly zishan z1 thread is locked.

Freakin' weird right? One of the best DAP''s in history. Maybe Walnut got it shut down?

 

[Taishaku]

Is this the Zishan Z1 being referred to here: https://www.ebay.com/itm/Zishan-DSD...ier/123284667866?_trksid=p2485497.m4902.l9144

 

[D0rk!n]

try this to your walnut v2s.
1. Enable your phone bluetooth
2. then remove the mmc/sdcard of walnut v2s
3. then turn on walnut v2s
4. press and hold eq button for 3-5seconds then walnut v2s will be connected to your phones bluetooth so you can used it as external source of audio like spotify and deezer.

Credits to: https://www.facebook.com/euriteria213

 

[Themilkman46290]

Hey guys, maybe you all can help me, i want to change the pot on my walnut (imbalance has become unbearable, full volume at 30%) i was thinking of getting an alps rk097 pot, has anyone ordered one? Can you send a link or the part number, so many variants that i am not sure witch one to order. Thanks in advance!!

 

[endia]

Hey guys, maybe you all can help me, i want to change the pot on my walnut (imbalance has become unbearable, full volume at 30%) i was thinking of getting an alps rk097 pot, has anyone ordered one? Can you send a link or the part number, so many variants that i am not sure witch one to order. Thanks in advance!!

i did change with this one but sourced from a local shop..

https://www.alps.com/prod/info/E/HTML/Potentiometer/RotaryPotentiometers/RK097/RK0971221Z05.html

also you might consider this too;

https://www.aliexpress.com/item/1pc...and-switch-shaft-length-17mm/32845207124.html

 

[Themilkman46290]

i did change with this one but sourced from a local shop..

https://www.alps.com/prod/info/E/HTML/Potentiometer/RotaryPotentiometers/RK097/RK0971221Z05.html

also you might consider this too;

https://www.aliexpress.com/item/1pc...and-switch-shaft-length-17mm/32845207124.html

Thanks alot for the links

 

[noknok23]

Thre is a new DAC/DAP/AMP from walnut with balanced output, the walnut F2, available on aliexpress for a bit more than $30. anyone ordered it already?

 

[MuZo2]

Thre is a new DAC/DAP/AMP from walnut with balanced output, the walnut F2, available on aliexpress for a bit more than $30. anyone ordered it already?

Both links dont work, seems its not available yet.

 

[Podster]

Not yet but I'm going to take the plunge just based on my V2/F1 stack, if you don't need a screen this thing should be awesome and once again a balanced output jack Be sweet if they've gone and stuffed the F1 amp into this baby as the F1 will drive just about anything 600 and below

https://www.aliexpress.com/item/Wal...4c-4a92-8904-55178692e9b7&transAbTest=ae803_3

 

[DBaldock9]

Thre is a new DAC/DAP/AMP from walnut with balanced output, the walnut F2, available on aliexpress for a bit more than $30. anyone ordered it already?

I ordered one on 06-MAY-19, and the Tracking info shows that it's already been handed over to the airline.
It should be here next week.

 

[DBaldock9]

Not yet but I'm going to take the plunge just based on my V2/F1 stack, if you don't need a screen this thing should be awesome and once again a balanced output jack Be sweet if they've gone and stuffed the F1 amp into this baby as the F1 will drive just about anything 600 and below

https://www.aliexpress.com/item/Walnut-F2-Professional-Lossless-HiFi-Music-MP3-Player-Max-Support-64GB-TF-Card-Expansion-USB-Sound/33012634762.html

Well, the F1 uses a pair of Single-Ended to Differential (Balanced) Line Driver chips (TI DRV134PA) to drive the 2.5mm TRRS Jack --- but the F2 appears to be using a set of 4x soldered-on JRC4580 op-amps for the Balanced circuit.

Quote from the AliExpress sales listing -
"... OPA2604 is responsible for voltage amplification, and four JRC4580s are responsible for current amplification. OPA2604 uses plug-in chip holders ..."