Vape-Fi

  1. jmills8
    Sanyo makes mods ? Im using clieto 120 at 100 watts and all is good with me.
     
  2. jmills8
    Im also using this one : asMODus Minikin Boost 155W Mod. I like its Curve option but still prefer the Captain.
     
  3. TrollDragon
    Not mods, Sanyo makes some nice 20700 batteries, they have a true 30A 3000mAh versions and a 16A 4250mAh one.
    Moochs report on them.
    https://www.facebook.com/batterymooch/posts/1808705072752404

    Available a few places.
    20700a's
    https://www.imrbatteries.com/sanyo-ncr20700a-3100mah-30a-flat-top-battery/
    20700b's
    http://www.illumn.com/batteries-cha...-sanyo-ncr20700b-high-discharge-flat-top.html
    https://www.imrbatteries.com/sanyo-ncr20700b-4000mah-15a-flat-top-battery/

    Running in wattage mode you wouldn't notice any of the firmware issues except for the improper resistance reading. That doesn't matter in wattage mode as you just turn up the power a little.
     
    jmills8 likes this.
  4. paradoxper
    Last addition: Honduran Rosewood Burl. Thinking this will be a full rosewood Scout with no exposed tube.
    20731178_10207971191556840_1344730783_n.jpg
     
  5. Raguvian
    Took a break from vaping and gave my Bellus + IPV D4 setup to a friend. He ended up using it for a few months, never cleaned it out and ended up getting juice all over the D4, which ended up shorting it out. I got it back from him and tried cleaning it out as best as I could, but the D4 was dead, so I rage bought a Sigelei VR2. The Bellus was salvageable, thankfully.

    I really like this setup.

    [​IMG]
     
    TrollDragon likes this.
  6. paradoxper
    Thank you Russian Overlords. I am still trying to gain ground understanding the different twill options.

    20046479_832496866913710_3730609018546405135_n.jpg
    20768166_739065122962667_8200840908410696852_n.jpg

    Some options naturally feel overcomplicated but I guess make sense for making up on shortcomings.

    I am still enjoying the experimentation and enjoying the yields. I've ordered all cord sizes to try and find something that suites a 1.2mm draw.
    Screen Shot 2017-08-13 at 7.01.04 AM.png
     
    jmills8 likes this.
  7. paradoxper
    Yes, ad-nauseam. :stuck_out_tongue:

    Today I ventured into the bath salts: IDK seemed counterintuitive but said why not. Short of it is, I think they work. I haven't had particular trouble
    with any hot spots with my builds which is why I've forgone the salting as it felt unnecessary. My anecdotes note some minor adjustments with the weaved wire as there are sort of mini-fractals that pop up within the wires. It is very minor, however.

    Salting there were no adjustments -- well, except for on the positive, it began to fractal just a touch and with a cinching of the positive nut this went away;
    so, bah, not very conclusive.

    To clarify; you simply soak your mesh in salted water: burn, rinse, repeat.

    Not so burnt out just yet.
    Screen Shot 2017-08-14 at 10.14.37 AM.png
     
  8. paradoxper
    Russian Frustrations: From two-four wraps now, I can't find enjoyment through the Tiny. Spaced or not, I can't escape spit-back.
    Through the Nextasis I've nailed it. 1.2 is not ideal still but vapes fine. 1.4-1.6mm airflow is the sweet spot.

    I'll get a rest week as I wait on my next shipment of cord; plenty of time to mull over ideas

    Screen Shot 2017-08-16 at 9.12.47 AM.png
     
    jmills8 likes this.

Share This Page