The FiiO X1 Discussion and Help and Support Thread |192K/24B|100mW | LO | inline remote
Nov 20, 2013 at 10:08 PM Thread Starter Post #1 of 7,793

JamesFiiO

Sponsor: FiiO
Joined
Mar 12, 2010
Posts
4,866
Likes
2,498

 
 
 
As you all known that we will release our new DAP X5 in next month, and at the same time, another team already start a new project called X1.
 
I knew it may not suitable to discuss X1 right now because we should focus on X3/X5, but I want to make it as the co-working project with all head-fi'er. so we will release all the information and listening to your feedback and change our design.
 
OK, below is some initial detail  of the X1,
 
---------------------------------Updated on 04/8/2014-----------------------------------------------------------------------------------------------------------------------------------------------------------
 
1, Target M.S.R.P  US$100 in U.S. the retail price in other countries will depended on our distributor and different VAT...
 
2, Playback supported: almost same as X3/X5,  but it can't support DSD playback and work as USB DAC like X3/X5.  
 
3, Size: 96.5 X 57 X 13.5 mm, Weight : 108g;
 
4, Build in Memory : None
 
5, Extend Memory : Micro SD card slot x1, supports up to 128g. 
 
6, Audio out : LO and PO, no Coaxial out. The LO/PO will use the same 3.5mm headphone jack but switched by menu.
 
7, Micro USB socket.
 
8, output power: 70@32ohms and 120mW@16ohms
 
9, Screen:  2.0'' 320*240 TFT
 
10, DAC : PCM5142 from TI, OP: OPA2322, BUF: ISL28291
 
11, Power supply for amp section : +/- 3.3V not output capacitor.
 
12, Battery: 1700mAh.
 
13, Play time: > 12 hours.
 
14, The other features is similar with X5, includes gapless playback , cover display, playlist, EQ.
 
-------the red word is updated on 20th , Jan-----------------------------
 
 
Will release the first ID design picture when we have ,  and there will included some elements
 
a, a power bottoms, worked as power( long press) and screen control ( one click )
 
b, individual volume control, up/down
 
c, a wheel
 
d, four bottoms around the wheel ( maybe clickable wheel )
 
---------------------------------------------------updated on 5/9/2014, some UI picture of X1------------------------------------------------------------------------------------------------------------
 
     
 
     
 
 
 
 
 
 
 
 
 
 
-------------Final Design of the ID for X1-------------------------------------------
 

 
 
 
 
 
------------The newest design of X1---------------------------------------------
 

 
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
21/11, here comes with the early ID design.
 

 
 
 
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25/11, We have a new design for X1,
 

 
FiiO Stay updated on FiiO at their sponsor profile on Head-Fi.
 
https://www.facebook.com/FiiOAUDIO https://twitter.com/FiiO_official https://www.instagram.com/fiioofficial/ https://www.fiio.com support@fiio.com
Nov 20, 2013 at 10:35 PM Post #4 of 7,793
  Make it IEM friendly if possible. Low impedance output and switchable gain would be nice.
 
Already have the X3 and angling for the X5.

 
of course, all our amp/dac/dap have very very low output impedance. 
 
btw, is the gain switcher still necessary when the output power is only about 100mW
 
FiiO Stay updated on FiiO at their sponsor profile on Head-Fi.
 
https://www.facebook.com/FiiOAUDIO https://twitter.com/FiiO_official https://www.instagram.com/fiioofficial/ https://www.fiio.com support@fiio.com
Nov 20, 2013 at 11:28 PM Post #5 of 7,793
Finally, an alternative to the Clip Zip that we can recommend to newbie audiophiles :D
 
James, for starters, you might want to see how the Rockboxed Clip Zip works, it might give you a good idea to how to implement the UI well for such a small player
 
Nov 21, 2013 at 12:52 AM Post #6 of 7,793
I am interested and hope that X1's UI can match/better Rockboxed Sansa Clip+.

My wish list for X1:
1) Parametric EQ
2) USB OTG host function. If OTG is not possible, I would rather get X3.

In my opinion, gain switch is not necessary with such output level. Insufficient output plus high gain may lead to clipping / distortion.
 
Nov 21, 2013 at 4:16 AM Post #8 of 7,793
Wow. We're getting prolific.
popcorn.gif
  To think that a year ago FiiO appeared to be backing away from this segment and will soon have 3 players 
bigsmile_face.gif
. I genuinely respect the fact that they rethought the original X3 and started over. Many companies would just patch a design to get it out instead of spending the extra time and resources for a redo.
 
Nov 21, 2013 at 7:12 AM Post #11 of 7,793
I like the word AFFORDABLE! But the X3 at $200 is actually pretty good already, at least, better than iPods xD

Would prefer these to use better DAC and a more basic amp because it seems like there is no possible way for us to bypass the DAC built in it. On the other hand, the amp section, can be bypassed with the LO, so in the later date, we can upgrade the amp to a better one.

As long as the UI is smooth and simple, we are perfectly fine (I believe), but, would prefer extended battery life. xD I have also seen a lot of DAP takes way too long to read a eternal memory card, would prefer these X1 do not have these issues as well!

Prefer it to be slim, so that we can stack up a amp in the future easier! :D

Please don't locate the headphone jack at awkward corners...

Comes in several color choice :wink: [FiiO's traditional black finish and in white version, maybe red ( I see your company has red )

If removing fancy screen and replaced with something like the E07K/17's screen for better SQ, I don't see that's a issue hehe

Just my though, anyone may disagree
Billson :)
 
Nov 21, 2013 at 8:36 AM Post #12 of 7,793
  here come with the first design picture. 
 

The design of A is totally sweet. I've been dying for someone to make a small DAP with good file support, UI controls and the xtra audiophile features like LO and separate amp section for maximum portability on the go.
While I'll be buying the X5 I have to admit that right now I'm actually way more hyped and interested in that X1 coz ultimately I want something compact to be used on the go with iems.
 
Nov 21, 2013 at 8:59 AM Post #13 of 7,793
  The design of A is totally sweet. I've been dying for someone to make a small DAP with good file support, UI controls and the xtra audiophile features like LO and separate amp section for maximum portability on the go.
While I'll be buying the X5 I have to admit that right now I'm actually way more hyped and interested in that X1 coz ultimately I want something compact to be used on the go with iems.

 
you can buy all our DAPs, lol
 
FiiO Stay updated on FiiO at their sponsor profile on Head-Fi.
 
https://www.facebook.com/FiiOAUDIO https://twitter.com/FiiO_official https://www.instagram.com/fiioofficial/ https://www.fiio.com support@fiio.com
Nov 21, 2013 at 9:37 AM Post #14 of 7,793
   
you can buy all our DAPs, lol

Well, I skipped the X3 coz the X5 was already announced and I decided I could wait for it but now I realize that if I always wait for the newer model announced I'll never buy a DAP. It will just never end - by the time the X5 is released there will be a lot of new info on the X7 and if I wait for the X7 then by the time it's released the X9 will probably be in advanced stages of development and so on. So I'll guess I'll just get the X5 and after that  the X1 and wait to see what the next models will be like.
 
Nov 21, 2013 at 11:59 AM Post #15 of 7,793
Now I'm torn - I was waiting for the X5  because I wanted the control wheel and its dimensions make up for its total size (wide device fits in my pockets easier than smaller but thicker), but since I'll only be using this with the one decent IEM I finally got around to buying, looks like a compact, control-wheel, 100mW IEM-specialized DAP is the DAP for me. Not that much bigger than the Clip, but probably sounds closer to the AK100 than the iPod Mini, with the latter's control wheel instead of the former's touchscreen.
 
X1-A version please, I preferred that shape of iPod Mini vs the other one the X1-B looks like.
 

Users who are viewing this thread

Back
Top