SOLD
Oct 18, 2008 at 1:36 PM Thread Starter Post #1 of 12

grawk

Itinerant Miscreant
Joined
Mar 14, 2005
Posts
8,739
Likes
34
SOLD

I've gotten a phono stage, and my m3 is almost done, so it's time to let this go. I've been very happy with it. I've got the original box and the remote.

• Full Remote Control
• 6 line inputs incl. 2 Tape in/outputs with dubbing facility
• Input switching through relays with Gold Plated contacts
• Switchable MM and MC phono input
• Balanced XLR outputs; 2 sets RCA line outputs
• Gold plated input and output input sockets
• Independent headphone amplifier
• NAD Link


Right now I won't ship outside the US unless I know you.

http://www.nadelectronics.com/img/da...ts/NAD_116.pdf

SPECIFICATIONS - NAD 116
Measured in accordance with EIA Standard RS-490 (IHF T-202)
Phono input
Input impedance (R and C) MM 47k + 200pF
MC 100 + 50pF
Input sensitivity ref. 0.5V 1KHz MM 1.5mV
MC 1mV
Input overload 20Hz/1KHz/20KHz MM 20mV/200mV/1700mV
MC
Signal to noise ratio (A-weighted with cartridge connected) MM 76dB ref. 5mV
MC 76dB ref. 0.5mV
RIAA accuracy MM ±0.2dB 20Hz - 20KHz
MC ±0.2dB 50Hz - 20KHz
-0.5dB at 20Hz
Line level inputs (CD, Video, Aux, Tuner, Tape1, Tape2)
Impedance (R+C) 20K + 450pF
Sensitivity ref. 0.5V 80mV
Maximum input signal >10V
Signal to noise A-weighted 98dB ref. 0.5V
Frequency response (20 - 20kHz in tone defeat mode) ±0.2dB
THD 0.01%
Line level outputs
Output impedance Pre-amp 100
Tape Source Z + 2K
Phones 120
Maximum output level Pre-amp >12V
Tape >10V
Phones >8V into 600
>250mV into 8
Physical specifications
Dimensions (W x D x H) 435 x 320 x 80mm
Weight 4.2Kg
Shipping weight 5.7Kg
Power consumption 19W
 
Oct 31, 2008 at 5:53 PM Post #8 of 12

grawk

Itinerant Miscreant
Joined
Mar 14, 2005
Posts
8,739
Likes
34
This is a nice preamp for the price of the mm/mc phonostage in it. Lots of input and output options.

And I'm open to interesting trades
smily_headphones1.gif
 

Users who are viewing this thread

Top