[TK16]

Brent might of been a great seller in the past, but now I would not consider buying from him again. Stock may be depleted on some tubes and selling bottom of the barrel stuff as NOS testing like the pair I got recently.

 

[nwavesailor]

Tubemonger has their Labor Day sale starting today with 10% off and ending Sept. 4th!

https://www.tubemonger.com/Default.asp

 

[jb77]

Tubemonger has their Labor Day sale starting today with 10% off and ending Sept. 4th!

https://www.tubemonger.com/Default.asp

This is for everyone, it is not directed at @nwavesailor

I noticed the discount is applied at checkout, as it is not currently listed on the main page while browsing.

Edit: it is now showing the discount

 

[BlakeT]

Hi,

Just checking to see if our resident experts had an opinion on which of these Mullard 12AX7's I should go for (same price, same tube) or any other comments or concerns. These would be used in my Aesthetix Calypso preamp. Thanks in advance.

https://www.ebay.com/itm/Matched-Pa...521593?hash=item5221de1839:g:mfoAAOSwBDhdVXES

or

https://www.ebay.com/itm/12AX7-ECC8...892600?hash=item3b38048c38:g:lkEAAOSwTcddZaf8

 

[TK16]

1956 Tesla double D-getters for the fellows into DD`s. i might have the only other pair in existance.
https://www.ebay.com/itm/2x-TESLA-6...ate-lk-Mazda-Cifte-DD-Getter-100/333311197322

 

[jb77]

Hi,

Just checking to see if our resident experts had an opinion on which of these Mullard 12AX7's I should go for (same price, same tube) or any other comments or concerns. These would be used in my Aesthetix Calypso preamp. Thanks in advance.

https://www.ebay.com/itm/Matched-Pa...521593?hash=item5221de1839:g:mfoAAOSwBDhdVXES

or

https://www.ebay.com/itm/12AX7-ECC8...892600?hash=item3b38048c38:g:lkEAAOSwTcddZaf8

I am no expert on 12AX7 tubes, however I have been very happy with these tubes from Tubemonger: Tungsram ECC83 12AX7 - MINT NOS NIB RARE Sept 1962 Welded Plate Tubes - Hungary.
https://www.tubemonger.com/Tungsram_SEP_1962_ECC83_12AX7_Welded_Plates_NOS_HU_p/1324.htm
Plus Tubemonger is a trusted site and they currently have a 10% off sale going on.

 

[bcowen]

1956 Tesla double D-getters for the fellows into DD`s. i might have the only other pair in existance.
https://www.ebay.com/itm/2x-TESLA-6...ate-lk-Mazda-Cifte-DD-Getter-100/333311197322

I like DD's.

Wait....you're referring to tubes. Nevermind.

 

[TK16]

I like DD's.

Wait....you're referring to tubes. Nevermind.

Oh were talking about DD tubes now ok!

 

[TK16]

Was going to post this as a non joke post, with a fantastic price for Amperex 6922 D getter USA. But then I noticed the seller.
https://www.ebay.com/itm/MATCHED-PAIR-OF-6922-E88CC-AMPEREX-PQ-TYPE-D-GETTER-VACUUM-TUBES-BJR5018/383127647976?_trkparms=aid=111001&algo=REC.SEED&ao=1&asc=40719&meid=b537c70526544ee8a855c08de0aecfe5&pid=100675&rk=1&rkt=15&sd=383127647976&itm=383127647976&pmt=0&noa=1&pg=2481888&_trksid=p2481888.c100675.m4236&_trkparms=pageci:18e90ff9-cb50-11e9-9de1-74dbd1807780|parentrq:e3afdb2716c0a4b7b6c13472ffd6d599|iid:1&redirect=mobile

Low priced ECC88 or PCC88 pinched waist steel pins. Manufacturer?
https://www.ebay.com/itm/e88cc-tube...waist-valve-preamp-valvo-mullard/254344349310

 

[Wes S]

Happy Labor Day, my fellow tube rollin buddies!

Just fired up the Holland ECC82 Long Plate D Foil Getter 58', and this tube continues to impress. I love everything about it, and can't get enough!

Happy Rolling and Listening.

 

[TK16]

Happy Labor Day, my fellow tube rollin buddies!

Just fired up the Holland ECC82 Long Plate D Foil Getter 58', and this tube continues to impress. I love everything about it, and can't get enough!

Happy Rolling and Listening.

Happy labor day fellas, was almost out the door to return 2 junk purchases thanks for reminding me.

 

[bcowen]

Happy Labor Day, my fellow tube rollin buddies!

Just fired up the Holland ECC82 Long Plate D Foil Getter 58', and this tube continues to impress. I love everything about it, and can't get enough!

Happy Rolling and Listening.

And HLD 2U2. Oh, sorry....wrong thread.

Can't you guys gloat about a tube I actually already have for once? Sheeez. I mean there are some good GE tubes. Surely? Just 'cause I haven't found any yet doesn't mean they don't exist.

 

[TK16]

And HLD 2U2. Oh, sorry....wrong thread.

Can't you guys gloat about a tube I actually already have for once? Sheeez. I mean there are some good GE tubes. Surely? Just 'cause I haven't found any yet doesn't mean they don't exist.

Join the club, have a bunch in my signature. Cheaper than EBay prices.

 

[bcowen]

Join the club, have a bunch in my signature. Cheaper than EBay prices.

You keep forgetting I only buy cheap tubes. Not 'cause I'm cheap, just that I pinch pennies. Unless it comes to 300B's, in which case my bank becomes very afraid.

Just bought these. Haven't ever tried any 6N23's, which is more of a direct sub for a 6DJ8/6922 than the 6N1P. Not sure if the Voshkod Rockets are better than the Reflektors, but these were cheap enough to give a whirl.

 

[TK16]

You keep forgetting I only buy cheap tubes. Not 'cause I'm cheap, just that I pinch pennies. Unless it comes to 300B's, in which case my bank becomes very afraid.

Just bought these. Haven't ever tried any 6N23's, which is more of a direct sub for a 6DJ8/6922 than the 6N1P. Not sure if the Voshkod Rockets are better than the Reflektors, but these were cheap enough to give a whirl.

Have not heard great things about them, they are decent to good tubes compared to the best Reflektor/Foton 3x 50`s 6N3P. These are extremely good tubes. 6N23P tubes have a high chance of technically dead to decent testing and noisy. You may get lucky though, The ones I`m referring to are the 74/75 Reflektor 74/75 tubes.