Pimeta R11G question
post-822280
Thread Starter
Post #1 of 3

CBMC

100+ Head-Fier
Joined
Jul 15, 2003
Messages
365
Reaction score
0
Joined
Jul 15, 2003
Posts
365
Likes
0
I have stacked buffers on the left and right channels so I have put 100 ohm resistors in r11 right and left. My ground buffer is not stacked. I was wondering what resistor value should be put in r11g? Should I put a 100 ohm resistor or a 220 ohm resistor? Any help is appreciated.
 
     Share This Post       
post-822604
Post #2 of 3

MisterX

Headphoneus Supremus
Joined
Dec 30, 2002
Messages
3,880
Reaction score
23
Joined
Dec 30, 2002
Posts
3,880
Likes
23
200 ohms would be a better idea but I doubt you would hear the difference if you used a 220 ohm resistor.
 
     Share This Post       
post-822657
Post #3 of 3

dip16amp

100+ Head-Fier
Joined
Dec 17, 2003
Messages
430
Reaction score
10
Joined
Dec 17, 2003
Posts
430
Likes
10
The ground channel is the return path for both the left and right channels. If you want maximum capacity from the left and right channels then I would think you would need four buffers on the ground channel.
 
     Share This Post       

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top