Passive Crossfeed Filters Anyone?

Discussion in 'Dedicated Source Components' started by Guidostrunk, Nov 4, 2017.
  1. Guidostrunk
    I'm interested in trying a passive crossfeed , filter. I'm having a hard time finding a place to source one.
    Not really interested in the virtual method.
    I'm also interested in peoples opinions and impressions regarding the topic.

  2. sigmasix
    Last edited: Nov 4, 2017
    Guidostrunk likes this.
  3. Guidostrunk
    Basically looking to add a passive to my current rig. I emailed Jan to see if he still makes the Corda Cross 1.
    Thanks for the post though.
  4. Monsterzero
    Any luck? Been wanting to add a bit of x-feed myself.
  5. mcgo
    Freds Amplifiers in Australia sells a couple of simple DIY crossfeed kits based on the Meier design. The parts included are for 3.5mm passthrough but you can easily assemble with RCA jacks if you prefer. In the past I’ve used a short RCA M/F extension cord cut in half with a suitable Hammond project box.
    Monsterzero likes this.
  6. Guidostrunk
    What's up MZ. Jan no longer makes them. So... After some research. I'll be making about 5 of these when all the parts come in. Total cost to make one without a case is around $12. With the cases I purchased, about $20.
    All soldered using 2" x 3" breadbords.

Share This Page