latest version from apkpure. .apk file.
i thk i found the issue something to do with my mesh wifi node .
after i enable my router wifi(not mesh)spotify back to normal.
after i korean menu reset and reflash fw didn't find left channel sound off again till now.
thanks for reply.
Hi everyone. Has anyone experienced wifi issues with SP1000m? Mine seems to recognise every wifi signal around the area except mine. It’s dual 2.4ghz and 5ghz bands. All my other devices seem to do just fine
Yes, my SP1000M has had wifi issues. As you probably know, the SP1000M only supports 2.4 GHz wifi, which can suffer from interference problems. All I can suggest is to experiment with your router. I personally set up a dedicated guest SSID that is 2.4 GHz only. If there is a lot of congestion in your area I would suggest using 20 MHz bandwidth rather than 40 MHz (for 2.4 GHz) and try different channels (I use 11). If your router has something called Universal Beamforming, turn that off. Also, USB 3.0 devices can cause issues if near your router or DAP. If possible, switch to USB 2 or simply disconnect.
Of course, you may have already done these things, but I thought would at least try to help out.
Yes, my SP1000M has had wifi issues. As you probably know, the SP1000M only supports 2.4 GHz wifi, which can suffer from interference problems. All I can suggest is to experiment with your router. I personally set up a dedicated guest SSID that is 2.4 GHz only. If there is a lot of congestion in your area I would suggest using 20 MHz bandwidth rather than 40 MHz (for 2.4 GHz) and try different channels (I use 11). If your router has something called Universal Beamforming, turn that off. Also, USB 3.0 devices can cause issues if near your router or DAP. If possible, switch to USB 2 or simply disconnect.
Of course, you may have already done these things, but I thought would at least try to help out.
I have downloaded the 2.43 version of Tidal APK from apkpure, extracted the contents to the Open Service folder on my SP1000M, and selected Install. When I try to launch Tidal it says 'Unfortunately Tidal has stopped' each time. Can anyone advise, or point me towards a version which works?
I have downloaded the 2.43 version of Tidal APK from apkpure, extracted the contents to the Open Service folder on my SP1000M, and selected Install. When I try to launch Tidal it says 'Unfortunately Tidal has stopped' each time. Can anyone advise, or point me towards a version which works?
Idk what "AKM dac filter error" is but on 6.2, Default mode sounds worst.
It make me question to myself why did AK did this.
I like most Sharp roll of filter for sharp and detail sounding, and Slow filter short delay for imagine and stage, smooth
I have downloaded the 2.43 version of Tidal APK from apkpure, extracted the contents to the Open Service folder on my SP1000M, and selected Install. When I try to launch Tidal it says 'Unfortunately Tidal has stopped' each time. Can anyone advise, or point me towards a version which works?
Good shout, I was missing the XAPK installer app, now its working after using that. The last time I tried this, I just had an APK (not an XAPK) file which I copied to the OpenService folder and installed direct from there. Using the app is pretty trivial, and Im glad it now works without issue.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.