1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.

    Dismiss Notice

MrSpeakers ETHER Flow and ETHER C Flow -- Inspired by Electrostatic Headphones

Discussion in 'Headphones (full-size)' started by jude, Jul 14, 2016.
First
 
Back
177 178 179 180 181 182 183 184 185 186
188 189 190 191 192 193 194 195 196 197
Next
 
Last
  1. Badas
    ^
     
    I'm new to the flow. So I'm still getting to grips with it.
     
    However I had a session between 2AM and 3AM last night. One of those I just can't sleep sessions.
     
    Geez. It sounded so great. Nearly brought tears to my eyes. So thank you and congrats on producing such a great HP.
     
    mrspeakers and Rowethren like this.
  2. Rowethren

    They really are special! Going without them for a day or so whilst I get a minor issue resolved and it is already horrible! :p
     
  3. RCBinTN
     
    Agree the Ether Flow are a great choice for a first planar HP.  They work well on many music genres.  I also own the LCD-X that have more bass punch, but the Flow have a more engaging mid/treble sound quality than do the X.  The X still win on bass.  Depends on the type of music you like.
     
    Also, I can verify the Flow sound exceptional with the Gumby - Bryston BHA-1 stack!  Rock on, y'all.
     
    Cheers,
    RCB
     
  4. scanspeakman1
    I had a small problem with my upgraded Ether->Ether Flow; when I received them the left angled earpad was a little bit compressed in comparison to the right pad. Also the left earpad was actually pressing a little against my ear which was very uncomfortable after listening for a while.
     
    Peter suggested I could try to put in a piece of foam between the earpads to allow the left earpad to fully extend itself. This helped a little but the left side still pressed against my ear. Then Peter send me a set of replacement earpads I received today. This totally solved the problem. Much more comfortable.
     
    Thanks MrSpeakers! Perfect service!
     
    Scanspeakman
     
    mscott58 and Badas like this.
  5. emptymt
    have anyone tried aftermarket cable on the ether flow?
     
    I'm looking to increase the mids(quantity, or make it a little more forward) a bit, me being a mid-head and all, I just want to try it. LOL
     

    I checked mine after reading your comment, actually, mine is a bit like that too, although the difference is not extreme, it is puffier on one side.
    here are some photos:
    IMG_0785.jpg
     
    IMG_0786.jpg
     
    IMG_0787.jpg
     
    IMG_0788.jpg
     
    IMG_0789.jpg
     
    IMG_0790.jpg
     
     
    can anyone comment on this? thx
     
  6. Wyd4
    My ether c (not flow) look like they have more variance than that from New. I noticed it right away but they sounded good and felt good so didn't think anything of it
     
  7. emptymt

    This is probably why I didn't notice it until today, LOL ^_^
     
    but I though it is best to ask around, just to be sure.
     
    U back on full-sized now? I thought you were on IEM route last time? hehe
     
  8. casper3127
  9. danieldpagan
  10. AxelCloris Administrator

    It's probably less expensive for Canadians to buy from a Canadian dealer than it is to import the headphone if the sale price is the same in their country. Import fees can be a real pain in the rear.
     
  11. danieldpagan

    Never knew that. Thanks!
     
  12. mrspeakers Contributor
    The ear pads will NOT compact symmetrically, the leather is natural and will almost alway break differently on each side and the foam is super soft and thus will compress assymetrically. If we use harder foam this goes away, but then so does the comfort. We make the pads this way because most people consider comfort a VERY high priority.

    Use a flat surfaced stand like a bendy head or a foam block to separate the pads during storage if pad assymetry bothers you. Once in a while a pad may be bad, it happens, but there really have only been a handful since we started shipping over 1.5 years ago. A bad pad is one where one ear really doesn't feel like it's fitting right, not one where there's an exterior assymetry.
     
    MrSpeakers Make every day a fun day filled with music and friendship! Stay updated on MrSpeakers at their sponsor page on Head-Fi.
     
    @funCANS MrSpeakers https://www.mrspeakers.com/ info@mrspeakers.com
  13. Jazic
    I'm about to pull the trigger on the Ether Flow or Ether C Flow.. both have their advantages and all but I'm still trying to decide between the two. The Flow is obviously going to have a wider soundstage and the C Flow will likely have a punchier bass/sub-bass. 
     
    I listen to a lot of metal and also game often. I loved the LCD-X and XC but had to sell them off due to comfort issues. Now I have the Hifiman HE560 with upgraded pads and they are awesome. Very detailed and punchy but not slamming. 
     
    I am leaning toward the open Ether Flow over the Ether C Flow due to the desire for closed vs need for closed back and having a more open sound.
     
    I guess I'm just trying to get a confirmation of my thoughts before I order them...
     
  14. danieldpagan


    If you don't need a closed headphone and you game a lot then I would go with open. I went with closed because I hate how open headphones sound like mini speakers since they leak so much and I listen to a lot of electronica/dance. Also I absolutely love how they have carbon fiber on them.

    For gaming and metal though im sure the Flow would be better for you but I'm only guessing since mine come in a couple of days from now.

    I'm sure someone here can confirm/deny this.
     
  15. husafreak
    There are good deals to be had in Canada now. The USD is strong against the CND. Shipping is ridiculous but often worth it.
     
First
 
Back
177 178 179 180 181 182 183 184 185 186
188 189 190 191 192 193 194 195 196 197
Next
 
Last

Share This Page