Monoprice Liquid Platinum Tube Rollers.
post-14746942
Thread Starter
Post #1 of 661

TK16

Headphoneus Supremus
Joined
Mar 2, 2016
Messages
4,274
Reaction score
2,711
Location
Budd Lake, NJ
Joined
Mar 2, 2016
Location
Budd Lake, NJ
Posts
4,274
Likes
2,711
Share your experiences, knowledge, wisdom, advice here, ask questions etc. If you know certain non 6922 variants that work correctly with an adapter, post em here like the 2C51 family of tubes. My amp should be here on Friday, I'll post some impressions here later on.
 
     Share This Post       
post-14747083
Post #2 of 661

Wes S

Headphoneus Supremus
Joined
Oct 11, 2016
Messages
2,583
Reaction score
2,711
Location
Plano, TX
Joined
Oct 11, 2016
Location
Plano, TX
Posts
2,583
Likes
2,711
Age
41
First roll for me has been the Amperex 7308 UN-CEP, made in USA.

Lovely midrange, with excellent tone. Voices are beautiful. Overall pretty even, with good layering and depth front to back. Pretty immersive, and 3d like. Tight and textured bass, that hits hard when called upon, but does not overshadow the mids at all. The highs are extened, but never get harsh. This tube has great dynamics.

My next tube is the Brimar CV2492, and then a Mullard CV2492. I will report back
 
Last edited:
     Share This Post       
  • Like
Reactions: TK16
post-14747395
Post #4 of 661

DRHamp

100+ Head-Fier
Joined
Feb 20, 2017
Messages
219
Reaction score
177
Location
Dallas, TX
Joined
Feb 20, 2017
Location
Dallas, TX
Posts
219
Likes
177
At the risk of re-posting information from the LP thread, I thought it would be worthwhile to get this posted again in the LP tube rolling thread. The following are some of the tubes that I have rolled in the Platinum and my top choice of each tube type.
2C51/396A/5270 - These work well with the proper adapter. My pick - 50s Foton triple mica
12AU7/ECC82 - These also work well with the proper adapter. My pick - 62 Telefunken Smooth Plate
12AT7/ECC81/6201 - These did not work for me - very audible noise - I tried a variety with differing degrees of noise. Requires adapter and assume the noise problem is related to tube amp factor. 12AT7 amp fact - 66 where 6922 amp factor is 33 and 12AU7 is 16. Based on this I assume the 12AX7 would also not work with an amp factor of 100. I look forward to others trying these to confirm my findings or not. My all time favorite tube pair are 50s Valvo PW 6201s.
I've tried quite a few 6922 and variants which I really like, but the the best sounding tube pair, by far, that I've tried in the Platinum are late 50s Sylvania 6922 D getters. They are rare and very hard to find and I can only hope to come across another pair.
So, that's a start - I have more tubes to roll
 
Last edited:
     Share This Post       
  • Like
Reactions: TK16 and Wes S
post-14747404
Post #5 of 661

Wes S

Headphoneus Supremus
Joined
Oct 11, 2016
Messages
2,583
Reaction score
2,711
Location
Plano, TX
Joined
Oct 11, 2016
Location
Plano, TX
Posts
2,583
Likes
2,711
Age
41
@ DRHamp - Good info. I have never seen a Sylvania 6922. Any chance i could see a pic?
 
Last edited:
     Share This Post       
post-14747439
Post #7 of 661

Wes S

Headphoneus Supremus
Joined
Oct 11, 2016
Messages
2,583
Reaction score
2,711
Location
Plano, TX
Joined
Oct 11, 2016
Location
Plano, TX
Posts
2,583
Likes
2,711
Age
41
Awesome! Thanks DRHamp!
 
     Share This Post       
post-14747458
Post #8 of 661

TK16

Headphoneus Supremus
Joined
Mar 2, 2016
Messages
4,274
Reaction score
2,711
Location
Budd Lake, NJ
Joined
Mar 2, 2016
Location
Budd Lake, NJ
Posts
4,274
Likes
2,711
At the risk of re-posting information from the LP thread, I thought it would be worthwhile to get this posted again in the LP tube rolling thread. The following are some of the tubes that I have rolled in the Platinum and my top choice of each tube type.
2C51/396A/5270 - These work well with the proper adapter. My pick - 50s Foton triple mica
12AU7/ECC82 - These also work well with the proper adapter. My pick - 62 Telefunken Smooth Plate
12AT7/ECC81/6201 - These did not work for me - very audible noise - I tried a variety with differing degrees of noise. Requires adapter and assume the noise problem is related to tube amp factor. 12AT7 amp fact - 66 where 6922 amp factor is 33 and 12AU7 is 16. Based on this I assume the 12AX7 would also not work with an amp factor of 100. I look forward to others trying these to confirm my findings or not. My all time favorite tube pair are 50s Valvo PW 6201s.
I've tried quite a few 6922 and variants which I really like, but the the best sounding tube pair, by far, that I've tried in the Platinum are late 50s Sylvania 6922 D getters. They are rare and very hard to find and I can only hope to come across another pair.
So, that's a start - I have more tubes to roll
https://www.ebay.com/itm/Pair-of-Sy...680ab6acb6b9761ffec1ed8|iid:1&redirect=mobile
Is this it?
 
     Share This Post       
post-14747483
Post #9 of 661

Wes S

Headphoneus Supremus
Joined
Oct 11, 2016
Messages
2,583
Reaction score
2,711
Location
Plano, TX
Joined
Oct 11, 2016
Location
Plano, TX
Posts
2,583
Likes
2,711
Age
41
 
     Share This Post       
post-14747490
Post #10 of 661

DRHamp

100+ Head-Fier
Joined
Feb 20, 2017
Messages
219
Reaction score
177
Location
Dallas, TX
Joined
Feb 20, 2017
Location
Dallas, TX
Posts
219
Likes
177
Those are horseshoe not D getters. Different lettering and I think those are 60s, but the price is in range. I got my pair from AC over in the Lyr tube rolling thread because they were microphonic in his MJ2. They are not microphonic is my LP or my MJ2.

They do look similar to mine - maybe what they're calling a horseshoe getter is the same as D getter
 
Last edited:
     Share This Post       
  • Like
Reactions: Wes S
post-14747498
Post #11 of 661

Wes S

Headphoneus Supremus
Joined
Oct 11, 2016
Messages
2,583
Reaction score
2,711
Location
Plano, TX
Joined
Oct 11, 2016
Location
Plano, TX
Posts
2,583
Likes
2,711
Age
41
Those are horseshoe not D getters. Different lettering and I think those are 60s, but the price is in range. I got my pair from AC over in the Lyr tube rolling thread because they were microphonic in his MJ2. They are not microphonic is my LP or my MJ2.
What do the one's you have sound like? Are they warm?
 
     Share This Post       
post-14747511
Post #12 of 661

DRHamp

100+ Head-Fier
Joined
Feb 20, 2017
Messages
219
Reaction score
177
Location
Dallas, TX
Joined
Feb 20, 2017
Location
Dallas, TX
Posts
219
Likes
177
What do the one's you have sound like? Are they warm?
Very detailed and awesome soundstage, both width and depth and to my ears, they are certainly not bright. I'm not good at describing what I hear so sorry for lack of detail.
 
     Share This Post       
  • Like
Reactions: Wes S
post-14747514
Post #13 of 661

Wes S

Headphoneus Supremus
Joined
Oct 11, 2016
Messages
2,583
Reaction score
2,711
Location
Plano, TX
Joined
Oct 11, 2016
Location
Plano, TX
Posts
2,583
Likes
2,711
Age
41
Very detailed and awesome soundstage, both width and depth and to my ears, they are certainly not bright. I'm not good at describing what I hear so sorry for lack of detail.
That works, and thanks! I love a wide soundstage.
 
     Share This Post       
post-14749176
Post #15 of 661

GlenT

New Head-Fier
Joined
Jan 16, 2019
Messages
6
Reaction score
3
Location
Bend, Oregon
Joined
Jan 16, 2019
Location
Bend, Oregon
Posts
6
Likes
3
I have a pair of JAN GE 5670 tubes that I liked the sound of in my LOXJIE P20 amp and I am going to try them in my LP with an adaptor. I hope to get the clarity of the LP with the smoothness of the 5670 tubes. However, I am quite new to this whole tube rolling thing.
 
     Share This Post       
  • Like
Reactions: Wes S

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top