Have any of you experienced that the audio in the right side dies periodically, when the input is set to XLR (From Aune S6 Pro) and the output is single ended? I am not sure if I am supposed to be able to use XLR as input when using single ended output.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Loxjie P20 Discussion- Starved for information on this thing!
- Thread starter GravityEyelids
- Start date
rrg123
Head-Fier
- Joined
- Mar 25, 2014
- Posts
- 51
- Likes
- 34
I have XLR input to balanced headphone and no problems so far.
Works fine.
I would check different cables and see if the issue is still there.
Works fine.
I would check different cables and see if the issue is still there.
Last edited:
arielext
Headphoneus Supremus
Sounds like cable issues to me, switch the XLR cables and if the problem moves to the left channel you found your issue.Have any of you experienced that the audio in the right side dies periodically, when the input is set to XLR (From Aune S6 Pro) and the output is single ended? I am not sure if I am supposed to be able to use XLR as input when using single ended output.
GravityEyelids
100+ Head-Fier
- Joined
- Aug 1, 2008
- Posts
- 258
- Likes
- 29
Nope i haven't experienced that issue either
Dobrescu George
Reviewer: AudiophileHeaven
I made a video on D10 from Loxije. I'm a reviewer, I'm doing my best to be honest. PLS be adviced, I can complain like crazy when something has issues
May also wash away the idea that I'm too positive, I just have met a ton of good stuff in the past, when something is like D10, I have to talk a bit about its issues as well
May also wash away the idea that I'm too positive, I just have met a ton of good stuff in the past, when something is like D10, I have to talk a bit about its issues as well
arielext
Headphoneus Supremus
D10 is not the same as P20; in alphabet, numbers, goal and amp type.
Dobrescu George
Reviewer: AudiophileHeaven
D10 is not the same as P20; in alphabet, numbers, goal and amp type.
There's no official thread for D10, so my guess was that people looking at D10 would eventually come to the one Loxije thread around here
rrg123
Head-Fier
- Joined
- Mar 25, 2014
- Posts
- 51
- Likes
- 34
Can someone with the balanced input (rear) and balanced outout (front) 4pin XLR to headphone do me a favor?
Remove one channel from the rear xlr connector and see if music bleeds into the headphone cup you removed.
You should only have music in one headphone cup and it should be dead silent in the other disconnected cup if all the wiring is correct.
Thank you in advance.
Remove one channel from the rear xlr connector and see if music bleeds into the headphone cup you removed.
You should only have music in one headphone cup and it should be dead silent in the other disconnected cup if all the wiring is correct.
Thank you in advance.
Last edited:
warbles
100+ Head-Fier
Anyone care to venture a take on how much of a boost into the aural stratosphere I might get by (presumably) upgrading to the Loxje from my present Sabaj PHA3 (w/ Nobsound pre-amp and suitably tube-rolled)? Oscillating madly and undecidably as usual between the 'thick' and the clinical (I have the same manufacturer's DA3 DAC), I'm thinking also no, maybe I'd go higher with a 7308 pimped Aune t1? Isn't the very idea of a tube DAC the way to approach the best of both worlds, clinical/unforgiving and meaty/thick....??
warbles
100+ Head-Fier
I'd love to have a better idea than I presently do what sort of upgrade I'd be achieving by getting this Loxjie when I already have the Sabaj PHA3, a similarly dimensioned little tube amp that, unlike the very same brand's DAC, has received next to NO coverage at all! A handful of positive comments from Amazon customers and that is IT.
chaotic_angel
500+ Head-Fier
My big thing is the USB output from my source. With the ENOG2 I have to buy an adapter. Maybe I should look more into them as it is a pretty good price.
Shane D
Hi Shane I am also eyeing egnog2 pro, what kind of adaptor you are talking about please. Noticong it doesn't have usb input.
Shane D
Headphoneus Supremus
Hi Shane I am also eyeing egnog2 pro, what kind of adaptor you are talking about please. Noticong it doesn't have usb input.
You have to get a USB to SPDIF converter. I.E. Behringer UCA222.
I didn't want to use a product that required a converter so I ended up getting an SMSL SU-8 DAC.
Shane D
turbomustang84
500+ Head-Fier
- Joined
- Mar 13, 2010
- Posts
- 609
- Likes
- 808
Finally I got the P20 and it sounds great .
But I have no clue if it's because it's Balanced or tube ...
LoL
But I have no clue if it's because it's Balanced or tube ...
LoL
turbomustang84
500+ Head-Fier
- Joined
- Mar 13, 2010
- Posts
- 609
- Likes
- 808
Might get this to add a USB option to my Geshelli Enog2.
chaotic_angel
500+ Head-Fier
Might get this to add a USB option to my Geshelli Enog2.
nice option for ENOG2Pro, wondering if the original output will be altered/colored by the Topping? i mean, double DAC.
Last edited:
Users who are viewing this thread
Total: 3 (members: 0, guests: 3)