taz
New Head-Fier
- Joined
- May 15, 2004
- Posts
- 37
- Likes
- 0
I'll be receiving my LD MKIII any day now and this amp has two DIP switches to set the gain for each channel as follows:
(1) - OFF/OFF Gain=10 For high impedance headphones (300+)
(2) - ON/OFF Gain=5 For medium impedance/sensitivity
(3) - OFF/ON Gain=4 For medium impedance/sensitivity
(4) - ON/ON Gain=3 For high sensitivity headphones
The HD595's are rated at 50 ohms impedance. Hence, any ideas what my switch settings ought to be for the LD MKIII? I am assuming that I should set them to either (3) or (4).
(1) - OFF/OFF Gain=10 For high impedance headphones (300+)
(2) - ON/OFF Gain=5 For medium impedance/sensitivity
(3) - OFF/ON Gain=4 For medium impedance/sensitivity
(4) - ON/ON Gain=3 For high sensitivity headphones
The HD595's are rated at 50 ohms impedance. Hence, any ideas what my switch settings ought to be for the LD MKIII? I am assuming that I should set them to either (3) or (4).