Launching the HD 6XX Dekoni Cablez! 🚀
Jan 8, 2021 at 5:58 PM Thread Starter Post #1 of 42
Joined
Oct 28, 2016
Posts
274
Likes
532
Location
Bergenfield, NJ
Do you want a balanced, desk length, high quality cable for your HD 58X Jubilee or HD 600? Does the idea of spending $240 for the Sennheiser branded 4.4mm Pentaconn cable just seem too expensive for your HD 6XX? Are you feeling like overwhelmed by the proprietary jargon and gobbledygook used by other 3rd party companies to try to differentiate their products? Well, so does Dekoni Audio, and we are bringing what we feel is the solution to you.

C592A979-736A-4C4E-9FFE-029C1119683C.jpeg
The first and most important aspects of the Dekoni HD 6XX cable are that it is 1.2m long, lightweight, and comfortable to use with a headphone. Let’s face it, shorter is better: most of us are using our headphones at a computer desk or bed, and a 3 meter cable winds up as a vipers nest on the ground, inevitably run over by a chair. Dekoni Cablez are also noticeably lighter, great for long listening sessions. With an attractive braided finish and low microphonic “rubbing sounds” from brushing against your shirt, our cables simply let you enjoy your audio with no fuss.

Dekoni makes no claims for exotic compounds or drastic A/B test beating construction. If you do happen to hear a slightly more effortless sound, this is simply due to the short length, 5N Copper, decent gauge wire, and allowing you to get the best out of your amplifier. The Dekoni HD 6XX balanced cable enables you to use the 4.4mm Pentaconn outputs on your headphone amp. Pentaconn was developed by Sony as a new balanced connector that makes superior contact, is easy and satisfying to use, and maintains durability and portability in size. Most likely, the balanced output was probably given optimization priority over the single ended ports in the design of the amplifiers, providing the best sound quality and power output on any given device.

The Dekoni HD 6XX Cablez are launching now on our website for $119 and coming soon to our other retailers. Use the launch code “Cablez” for $20 off!

 
Last edited:
Dekoni Audio Stay updated on Dekoni Audio at their sponsor profile on Head-Fi.
 
Dekoni Audio @dekoniaudio http://www.dekoniaudio.com sales@dekoniaudio.com
Jan 8, 2021 at 8:35 PM Post #2 of 42
Do you have any plans to offer different lengths in the future? 1.2 meters sounds great for portable use, but slightly longer runs might be preferable for desktop use, IMO.
P.S. Is there any particular reason to use ''cablez" instead of "cables''? Just curious. :)
P.P.S. Great to see somebody finally offering afordable cables with 4.4 termination. Keep it up!
 
Jan 9, 2021 at 2:18 AM Post #5 of 42
May I know why the buyer is not given an option to select any other terminations or amp connectors, such as 2.5mm TRRS balanced, 4-pin XLR balanced, or even 3.5mm SE options? Does limiting the cable to 4.4mm Pentaconn connectivity not restrict unnecessarily the cable's versatility, its range of connectivity options, and ultimately, its marketability?
 
Jan 9, 2021 at 11:10 AM Post #12 of 42
A day late, literally the story of my life with headphone products! On the bright side when i need a new replacement you might have more options.
 
Jan 9, 2021 at 3:17 PM Post #13 of 42
Are these cables really make a difference in sound quality?
In my expirience and asking the same question to other audiophiles that i trust NO there is no difference in sound quality , but again i like good quality cables and i respect people saying that they can listen a small differences , what i dont get is people saying they get huge differences.
I am speaking about same connection always balanced vs balanced aftermarket and unbalanced vs unbalanced aftermarket.
 
Jan 9, 2021 at 3:21 PM Post #15 of 42
Do you want a balanced, desk length, high quality cable for your HD 58X Jubilee or HD 600? Does the idea of spending $240 for the Sennheiser branded 4.4mm Pentaconn cable just seem too expensive for your HD 6XX? Are you feeling like overwhelmed by the proprietary jargon and gobbledygook used by other 3rd party companies to try to differentiate their products? Well, so does Dekoni Audio, and we are bringing what we feel is the solution to you.

C592A979-736A-4C4E-9FFE-029C1119683C.jpeg
The first and most important aspects of the Dekoni HD 6XX cable are that it is 1.2m long, lightweight, and comfortable to use with a headphone. Let’s face it, shorter is better: most of us are using our headphones at a computer desk or bed, and a 3 meter cable winds up as a vipers nest on the ground, inevitably run over by a chair. Dekoni Cablez are also noticeably lighter, great for long listening sessions. With an attractive braided finish and low microphonic “rubbing sounds” from brushing against your shirt, our cables simply let you enjoy your audio with no fuss.

Dekoni makes no claims for exotic compounds or drastic A/B test beating construction. If you do happen to hear a slightly more effortless sound, this is simply due to the short length, 5N Copper, decent gauge wire, and allowing you to get the best out of your amplifier. The Dekoni HD 6XX balanced cable enables you to use the 4.4mm Pentaconn outputs on your headphone amp. Pentaconn was developed by Sony as a new balanced connector that makes superior contact, is easy and satisfying to use, and maintains durability and portability in size. Most likely, the balanced output was probably given optimization priority over the single ended ports in the design of the amplifiers, providing the best sound quality and power output on any given device.

The Dekoni HD 6XX Cablez are launching now on our website for $119 and coming soon to our other retailers. Use the launch code “Cablez” for $20 off!


Thanks for this always a good idea to have options to choose... Can u please give us a closer look dimensions on those 2 pins ?
My xp with after market pins is that most of them are bigger and fatter and they stack inside or broke the connection.
 

Users who are viewing this thread

Back
Top