maketus
New Head-Fier
a little confused . Dashboard never show higher than 48Khz
Khadas Tone2 Pro: Mini Desktop DAC with built-in Headphone Amplifier
- Thread starter KHADAS
- Start date
The dashboard only shows the sample rate before unfolding for MQA:a little confused . Dashboard never show higher than 48Khz
For "regular" FLAC with native 192000 Hz sample rate, the dashboard shows it correct:
JinxDynamic
New Head-Fier
I see the Accusilicon AS318-B list in specification. But the photos of Accusilicon AS318-B Ive found on the internet is quite difference from the clock in the board photo. @KHADAS Am I missing something ?
Attachments
Accusilicon AS318-B have different footprint packages, we just choose one in small size:
http://www.accusilicon.com/docs/AS318BM.pdf
JinxDynamic
New Head-Fier
Thanks a lot. Im gonna make my order now. Having d50s/a50s stack already. Tone2pro gonna be the DAC for my next transportable setup. Hope its pair well with K1500.
Attachments
JinxDynamic
New Head-Fier
@KHADAS One more question ? Is the Tone2Pro equipped with 2x ES9038Q2M or just 1. Thanks
Baten
Headphoneus Supremus
- Joined
- Sep 13, 2012
- Posts
- 1,910
- Likes
- 1,002
Two of them are visible in PCB pictures. So, 2.
JinxDynamic
New Head-Fier
I actually check the PCB photo. Looks to me the printing in those 2 alike chip is not the same. And I look up everywhere on the internet but does not find 2x 9038Q2M mentioned anywhere. So I'm not sure.
Nope, the Tone2 Pro is only equipped with one ES9038Q2M, the one in same footprint is ES9311Q which is a LDO chipset.
Baten
Headphoneus Supremus
- Joined
- Sep 13, 2012
- Posts
- 1,910
- Likes
- 1,002
Thanks for correction
maketus
New Head-Fier
is there benefits using two than one. i think that is just more expencive using two nothing more.
nodemms
New Head-Fier
@KHADAS is there any repercussion for leaving the Tone2 on 24/7 or for extended periods of time? I'm currently using it with the balanced RCA's out to another amp.
If I leave the Tone2 on, my displays will not turn off to follow the power plan settings on my machine (win10). I'm also curious if there's an auto-off feature I might be able to take advantage of. My primary concern are thermals and any impact on the lifetime of the device. Thank you!
If I leave the Tone2 on, my displays will not turn off to follow the power plan settings on my machine (win10). I'm also curious if there's an auto-off feature I might be able to take advantage of. My primary concern are thermals and any impact on the lifetime of the device. Thank you!
This combination is GOD TIER....
Running the Khadas balanced RCA into the 789. I was genuinely concerned that the low end would be weak. HELL NO. Tone2 rumbles and punches like an absolute boss. I am rediculously happy with the sound that comes out of this pairing.
Running the Khadas balanced RCA into the 789. I was genuinely concerned that the low end would be weak. HELL NO. Tone2 rumbles and punches like an absolute boss. I am rediculously happy with the sound that comes out of this pairing.
nodemms
New Head-Fier
This combination is GOD TIER....
Running the Khadas balanced RCA into the 789. I was genuinely concerned that the low end would be weak. HELL NO. Tone2 rumbles and punches like an absolute boss. I am rediculously happy with the sound that comes out of this pairing.
I'm literally doing this same thing to the Monolith 887 and all the way out to my Aeon Rt's and love it . I literally thought my desk somehow made it on the internet at first. Thanks for sharing.
My pleasure - it was a surprise that it is as clean, transparent and resolving as it is. Imaging is significantly better than I expected. I suspect it’s the same on any THX pairing.
Last edited:
Users who are viewing this thread
