[dokebi]

Inthe power section. I wish to use 4 capacitors instead of the normal 2. Would I need to simply jumper the +'s and -'s of the traces to each other as you would with a multi battery pack? Or would I need to keep them separate with jumpers going to the power inputs? For example, jumper 4 of the negative legs of the capacitors to the negative side of the board and the 4 positive legs of the capacitors to the positive side. Would I need to change any resistor values if I did this?

 

[puppyslugg]

Parallel (- to -, + to +) 2 caps for the positive side and same for the neg. side. Run a pair of wires from each set of caps to the board. There is no affect any of the resistors.