1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.

    Dismiss Notice

Hifiman is looking for the Amp designer

2 3 4
Next
 
Last
  1. TeamHiFiMAN
    Hifiman has a long product line of amp module working for HM-901, HM-802, HM-801 and the coming mid-range HM-650. At this time, we want to move them forward, and we decide to take an amp design competition. If you are interested about it, please show your idea to us.
    We prepare 6 prize to the winners:
    1st   1 HE560
    2nd   2 RE600
    3rd    3 RE400
     
    Each amp will be tested by the professional engineer of HIFIMAN, and there is a chance to have business cooperation.
     
    ###New updates: you need to build a real amp card which works for hm901 hm802 to join this contest. sorry for the misunderstanding.[​IMG]
     
    ###update #2:
                           1. designers hold the rights of their amps
                           2. tell us you are ready to make an amp, and we will provide technique support to you
                           3. we will test the amps by the HIFIMAN engineers, and also we are going to invite head-fiers to test                                 together 
                          
    140515-hifiman-.jpg
     
    HiFiMAN Innovating the art of listening. Stay updated on HiFiMAN at their sponsor page on Head-Fi.
     
    http://hifiman.com
  2. Zelda
    Very interesting. but what exactly should we suggest?
     
  3. GREQ
    Makes me wish I studied electrical engineering... kinda... a little... maybe.
     
  4. Benjamin6264
    Although I'm not qualified to participate, I think it would be a good idea to give measurement specifications (i.e. maximum thickness).
     
  5. Armaegis
    Maybe something akin to Dr Meier's active balanced ground?
    http://www.meier-audio.homepage.t-online.de/grounds.htm
     
    It's been a pet idea of mine that I've tinkered with in the past, and I've built working "proof of concept" amps out of it.
     
     
    IMG_5073.jpg
    The board on the right is an AMB s22 power supply. The three boards on the upper left are AMB a20's. The magic stuff in the breadboard are some INA134/137 chips to create the unique L/R/G signals. I've also done a vastly simplified version of that using the INA134/137 with BUF634 in the feedback loops. Interesting since that basically created an amp with no resistors in the circuit.
     
  6. penmarker
    Who will hold the rights for the designs?
     
  7. TeamHiFiMAN
     
    you are build a amp card to join the competition
     
    HiFiMAN Innovating the art of listening. Stay updated on HiFiMAN at their sponsor page on Head-Fi.
     
    http://hifiman.com
  8. TeamHiFiMAN
    you build the amp card to join the competition. If we decided to make it as a product, we could talk about it later.
     
    HiFiMAN Innovating the art of listening. Stay updated on HiFiMAN at their sponsor page on Head-Fi.
     
    http://hifiman.com
  9. gradoist
    All you lack right now is a simple high current amp card (I perfer opa2111/dual opa111s as the op amp(s)) that can be used to drive hard-to-drive low ohm phones such as AKG K701s or Grado GS1000s
     
  10. sub50hz
    So... is there a base design file with pinout/contact information from the mainboard or is this just a "show us what you've made" sorta deal?
     
  11. Zelda
    you mean from scratch?
     
  12. gevorg
    http://www.head-fi.org/f/6/diy-do-it-yourself-discussions
     
  13. sbradley02

    Doesn't help in this discussion as I don't see a thread on how to construct a Hifiman amp card.
     
    Are they expecting us to use their card format for the amp?
    If so we will need full physical specs for said card including maximum allowable dimensions.
    Also require power supply and input/output requirements.
    As it stands it seems as though they are requiring the contestants to reverse engineer their existing design.
    If that is indeed the case then I don't expect to see a lot of participation, though they may get a few.
    If they really wanted lots of participation, making prototype boards available for purchase along with said specs would ensure it.
     
    kchapdaily likes this.
  14. Q Mass
     
    Wow!, gets my vote so far.
     
    OK, I know we don't get votes, but still... [​IMG]
     
  15. 0MoUsE0
    Every time I see an electrical board, I always wonder how human design such complicated stuff..............
    Or it just look complicated to us =.=
     
2 3 4
Next
 
Last

Share This Page