FS: Starving Student Hybrid Tube Amp Complete Kit - SOLD
Sep 13, 2009 at 7:14 AM Thread Starter Post #1 of 4

alphaphoenix

Banned by order of heir wallet and significant other.
Joined
Apr 5, 2009
Posts
3,091
Likes
38
Starving student hybrid headphone P2P(point to point) tube amplifier kit as designed by Pete Millett. I don't have the time to build this superb (price/performance ratio) amp. You get EVERYTHING that is needed to build this headphone amplifier. All you need is solder iron and a few hours. Comes with the following pieces that makes up this complete kit (most of components below fit in the tin):
  1. 1 - Cisco 48 vdc, 60 watt power supply w/ IEC cable (US style) - 100-250 Volt, 50-60 Hz input
  2. 2 - Raytheon NOS 19J6 tubes
  3. 2 - 7-pin tube sockets w/ mounting screws
  4. 1 - Coaxial DC jack (to match power supply cord)
  5. 1 - 50k dual potentiometer w/ knob
  6. 1 - 1/4" stereo headphone jack
  7. 2 - RCA panel-mount jacks
  8. 2 - IRF610 MOSFET transistors
  9. 2 - TO-220 heat sinks w/ insulators and mounting hardware (in fact, the transistors are already mounted for you!)
  10. 1 - SPDT toggle switch
  11. 4 - 180uF, 63v electrolytic capacitors
  12. 2 - .1uF, 100v polyester film capacitors
  13. 7 - 2k, 1/4watt resistors
  14. 4 - 220k, 1/4 watt resistors
  15. 2 - 33k, 1/4 watt resistors
  16. 2 - 1/4" rubber grommets
  17. 1 - Unused Radio Shack role 60/40 Rosin-Core Solder
  18. 1 - About 20 ft of 22 AWG Silver Teflon Wire (top quality wire)
  19. 1 - Fossil Tin square box in new condition (dimensions are 3.5inches and 2.25inches tall)
  20. 1 - Copper Clad Board
  21. 2 - 4 lug terminal strips
  22. 1 - 2 lug terminal strip
  23. Copy of schematic from Pete Millett's web site

Just add your soldering iron and skills and in a few hours, you've created a respectable hybrid tube amp. Shipping in CONUS $8 and is preferable, or $30 to the rest of the world.

Thanks.
SSHkit.JPG
 

Users who are viewing this thread

Top