[FiiO]

There is a new firmware available http://fiio-firmware.fiio.net/LC-BT2/LC-BT2-FW1.1.zip but it still has the voice call issue. Connected to two devices, one device in a phone call then the second device plays a sound then LC-BT2 goes silent.

Hi,

We have recorded this issue and will try to fix in next firmware update. Please accept our sincere apology for all the inconvenience bringing to you.

Best regards

 

[caprimulgus]

Hi rep,

Between LC-BT2 and UTWS1 do either or both of them support multipoint pairing? (ie. connected to two devices at the same time - eg. listening to music on DAP, but connected to phone, and switch automatically when a phone call comes in)

I couldn't find any mention of multipoint for either product, but it looks like from comments in this thread that LC-BT2 does support it? How about UTWS1?

Cheers!

 

[d73b3e]

Hi,

We have recorded this issue and will try to fix in next firmware update. Please accept our sincere apology for all the inconvenience bringing to you.

Best regards

Through what I have experienced with FiiO, I believe fully in the team and I did and going to brag about FiiO products everywhere I go. Keep up the great work, cheers!!!

 

[FiiO]

Hi rep,

Between LC-BT2 and UTWS1 do either or both of them support multipoint pairing? (ie. connected to two devices at the same time - eg. listening to music on DAP, but connected to phone, and switch automatically when a phone call comes in)

I couldn't find any mention of multipoint for either product, but it looks like from comments in this thread that LC-BT2 does support it? How about UTWS1?

Cheers!

Hi,

The UTWS1 does not support connect to two devices at the same time. But you could connect one of the unit to the first device, and the other to the second device if you need.

Best regards

 

[caprimulgus]

Hi,

The UTWS1 does not support connect to two devices at the same time. But you could connect one of the unit to the first device, and the other to the second device if you need.

Best regards

LC-BT2 does support multipoint? (Connect to 2 devices at the same time, and allow phone call to overtake audio from the other)

Like BTR5 - allows me to listen to one device, but it automatically swaps to phone when a phone call comes in. I would like the same, but in a TWS or quasi-TWS form factor.

 

[d73b3e]

Hi,

The UTWS1 does not support connect to two devices at the same time. But you could connect one of the unit to the first device, and the other to the second device if you need.

Best regards

I would suggest to have an option to turn off multipoint connection in both LC-BT2 and BTR5.

 

[d73b3e]

LC-BT2 does support multipoint?

Yes, it does.

 

[Krayonn]

Share the post to win the Neckband Bluetooth Cable LC-BT2(69.99USD)！

# FiiO’s latest Neckband sports Bluetooth cable – LC-BT2 is now available globally!
With the CSR8675 Bluetooth chip directly feeding the audio signal into the efficient AK4431 DAC through I2S, in conjunction with the skillfully-designed algorithms originally used on the acclaimed FiiO BTR series of devices, the LC-BT2 puts out extremely clean sound that significantly noticeably better than the typical Bluetooth device.
The Qualcomm CSR8675 chip on the LC-BT2 supports Bluetooth 5.0 and the
SBC/AAC/aptX/aptX HD/aptX LL/LDAC high-res audio formats, ensuring you get
actual HD quality music over Bluetooth.
Key features of the FiiO LC-BT2 include:
* Ergonomic neck hanging design
* Skin-friendly silicone material, oil and sweat resistant
* Qualcomm CSR8675 flagship Bluetooth chip
* SBC/AAC/aptX/aptX LL/aptX HD/LDAC Bluetooth formats supported
* AK4331 DAC
* 24 hours battery life, 350 hours standby time
To find out more about the LC-BT2, please visit the product page on https://www.fiio.com/lcbt2
To purchase the FiiO LC-BT2, kindly locate your nearest authorized sales agent via our online listing: https://www.fiio.com/wheretobuy. If you do not have a sales agent listed, kindly make your purchase from our Aliexpress store: https://www.aliexpress.com/item/4000763783569.html
To celebrate its release, we are giving out one LC-BT2 and 3pcs μBTR to 4 of our fans! Follow the steps to join in!
How to enter:
1. Like our Facebook page @FiiOAUDIO
2. Share this post(Click here) on your timeline
* Make sure that your share is public so we may know of it on our end.
When to enter:
Entries close at 11:59pm, April 14th GMT; Winners will be announced on 15th April.
How to draw the winners:
We will draw the winner using the Third-Party Draw Service provided by Random.org.
Disclaimers:
1. The first winner will get a LC-BT2 and each of the reset three winners will get a μBTR.
2. FiiO reserves all the rights of final interpretation for the content above.
Best Regards
Guangzhou FiiO Electronics Technology Co., Ltd

Is there a way to buy this in India? Your India store doesn't list this item and AliExpress doesn't ship to India right now.

 

[FiiO]

Is there a way to buy this in India? Your India store doesn't list this item and AliExpress doesn't ship to India right now.

Hi,

Sorry the seller in India did not book this product from us maybe because of the hard time in covid-19. And our Aliexpress store could not send to India because of the strict custom there currently.

Best regards

 

[FiiO]

FiiO releases the new firmware for LC-BT2! A new function of renaming the Bluetooth device has been added!

The following changes and improvements have been made to the FW1.2:

1. Added a new function of renaming the Bluetooth device. (FiiO Control App->Setting menu->Custom device name. The same function will be available later in FiiO Music App. ）
2. Changed the time to press the Power button for 2 seconds to turn off the device.
3. Fixed the issue where the device would fail to enter playing state when connected to computers/adapters through HFP, and thus led to unsuccessful audio output after entering standby mode.
4. Fixed the issue where voices could not be heard under phone calls when there was another call.
5. Fixed the issue where the EQ was invalid after certain operations under the USB DAC mode.
6. Miscellaneous bug fixes and performance improvements.



Please visit the LC-BT2 Firmware download page and download the FW1.2

How to update the firmware for LC-BT2: Click here

For Android users, search “FiiO Control” in any application market to download it. Or directly download this APK files and then copy it to FiiO players or cell phones: Click to download

For iOS users, search “FiiO Control” in App Store to download it.

 

[d73b3e]

FiiO releases the new firmware for LC-BT2! A new function of renaming the Bluetooth device has been added!

Excellent work. The neckband is now working as desired.

 

[FiiO]

Glad to hear about that. Thanks for the feedback.

Best regards

 

[Aevum]

just got mine, sound quality is good, slightly above the M3k, using it with my UE900s

The issue is that im getting artifacting, range and some issues with LDAC, i have to test it a bit in APTX-HD, maybe its worth the downgrade for stability.

And yes, first thing i did taking them out of the box was update to 1.2, even if the FiiO control software says its 1.722 for some reason

 

[C_Lindbergh]

I got a big problem with my LC-BT2... When I'm listning to music via my PC (whilst also connected to my phone) I get this static interference whenever I take my phone close ( like 20-30 cm) to the BT-LC2. I've never had this problem before with any other multi point bluetooth device.

 

[Krayonn]

I finally received mine from Hifigo. Tracking was full of suspense. SQ is much better than the stock Fearless cable that came with the Roland. With this and a little EQ, it really opens up. Range is good but has reduced a little after the firmware update. Fit was an issue because of the recessed sockets. Took a chance and superglued it at the outer edges. All well for now.