FiiO’s Upgraded Bluetooth Amplifier BTR1K: Qualcomm QCC 3005 BT chip, BT 5.0 and aptX /aptX LL/AAC supported, RGB light, NFC pairing, Type C and USB DAC
Oct 29, 2017 at 7:20 AM Post #47 of 797

zolom

500+ Head-Fier
Joined
Sep 7, 2003
Posts
529
Likes
197
Location
Here
Last edited:
Oct 30, 2017 at 2:54 AM Post #50 of 797

0x6170

New Head-Fier
Joined
Apr 28, 2017
Posts
47
Likes
16
Location
Tttt
I discovered one annoyance with the BTR1. When you have it set up to be connected to two devices simultaneously, if you then lose connection to one of them, you get this repeated audio-double-beep notification from then on, until it re-connects to the lost device or you turn off/on the BTR1.

Simple use case: I have set up BTR1 to be connected to my iPhone and iPad. When I preparing to leave home, I turn on the BTR1, it then connects to the iPhone and iPad. Clip the BTR1 to my shirt, put-on winter jacket, start playing on the iPhone and then leave home. As soon as it looses connection to the iPad, it starts double-beeping. Then I have to turn off/on the BTR1 to stop it double-beeping which is annoying when the BTR1 is not easily reachable.

FiiO: is this behaviour (constant double-beeping) is by design? Is it possible to turn this off somehow?
 
Oct 30, 2017 at 3:30 AM Post #51 of 797

rkw

Headphoneus Supremus
Joined
Oct 7, 2001
Posts
2,448
Likes
2,715
Location
San Francisco
Looks good.
The EarStudio got analog volume support as well, but the key attributes are the battery life (up to 14 hours), as well as the balanced output.
The Bluewave's rotary volume knob is appealing to me. However, both of these are crowd funded projects. Having been burned before, I'm willing now to wait until a product is truly, genuinely available and lives up to claims, even if the price is higher.
 
Oct 31, 2017 at 6:14 AM Post #52 of 797

FiiO

Sponsor: FiiO
Joined
Jul 30, 2008
Posts
7,612
Likes
3,991
Location
Guangzhou,China
I discovered one annoyance with the BTR1. When you have it set up to be connected to two devices simultaneously, if you then lose connection to one of them, you get this repeated audio-double-beep notification from then on, until it re-connects to the lost device or you turn off/on the BTR1.

Simple use case: I have set up BTR1 to be connected to my iPhone and iPad. When I preparing to leave home, I turn on the BTR1, it then connects to the iPhone and iPad. Clip the BTR1 to my shirt, put-on winter jacket, start playing on the iPhone and then leave home. As soon as it looses connection to the iPad, it starts double-beeping. Then I have to turn off/on the BTR1 to stop it double-beeping which is annoying when the BTR1 is not easily reachable.

FiiO: is this behaviour (constant double-beeping) is by design? Is it possible to turn this off somehow?
Hi,
We tested just now. When one of the collected device is disconected, only once double-beeping would appear. Or this issue happen when walking back and forth?
Best regards
 
FiiO Stay updated on FiiO at their sponsor profile on Head-Fi.
 
https://www.facebook.com/FiiOAUDIO https://twitter.com/FiiO_official https://www.instagram.com/fiioofficial/ https://www.fiio.com
Nov 1, 2017 at 3:58 PM Post #53 of 797

g33k

New Head-Fier
Joined
Nov 1, 2017
Posts
3
Likes
1
Location
Earth
I had purchased the BTR1 over the weekend. While I liked it for its performance, I eventually decided to return it due to some niggling issues. I have analysed and reviewed the BTR1 on my blog, independent of other reviews and hope in doing so, I have brought in a new perspective.

It is only after posting my review that I looked in to other reviews and thus came across Head-Fi. Feel free to re-purpose the review for the benefit of others but kindly link back to my blog as the original source.
 
Nov 1, 2017 at 7:42 PM Post #54 of 797

infernix

New Head-Fier
Joined
Jan 7, 2015
Posts
17
Likes
19
I had purchased the BTR1 over the weekend. While I liked it for its performance, I eventually decided to return it due to some niggling issues. I have analysed and reviewed the BTR1 on my blog, independent of other reviews and hope in doing so, I have brought in a new perspective.

You can't state in your review that "Although my method might not be the most precise, I can confidently say that the latency is over 200ms." and not be aware of the fact that you need aptx-LL connectivity to get the latency down to the 40ms range. I feel it's a bit misleading to any readers, and i suggest you retest with aptx-ll capable equipment.
 
Nov 1, 2017 at 7:55 PM Post #55 of 797

slackerpo

100+ Head-Fier
Joined
Dec 26, 2013
Posts
305
Likes
38
I had purchased the BTR1 over the weekend. While I liked it for its performance, I eventually decided to return it due to some niggling issues. I have analysed and reviewed the BTR1 on my blog, independent of other reviews and hope in doing so, I have brought in a new perspective.

It is only after posting my review that I looked in to other reviews and thus came across Head-Fi. Feel free to re-purpose the review for the benefit of others but kindly link back to my blog as the original source.

it seems honest, although i think the antenna is near the headphone socket.
 
Nov 1, 2017 at 8:14 PM Post #56 of 797

antdroid

Headphoneus Supremus
Joined
Jul 31, 2016
Posts
2,193
Likes
4,303
Location
Seattle
I just got the BTR1 today from amazon and have been listening to it using my Essential Phone and it's pretty solid. I compared it to a TROND branded Bluetooth adapter which also supports 4.2 and AptX. The BTR1 sounds much more fuller and warm than the Trond. The Trond is about $25 less but there is a noticeable difference in sound.

I also compared to BTR1 to my Schiit Stack using a modded M1060 headphones and it's not anywhere near that quality and clarity, but it's quite serviceable for something on the go and bluetooth. I will say that the music is a tad bloated sounding but I think I can eq it with Poweramp.
 
Nov 1, 2017 at 11:42 PM Post #57 of 797

g33k

New Head-Fier
Joined
Nov 1, 2017
Posts
3
Likes
1
Location
Earth
You can't state in your review that "Although my method might not be the most precise, I can confidently say that the latency is over 200ms." and not be aware of the fact that you need aptx-LL connectivity to get the latency down to the 40ms range. I feel it's a bit misleading to any readers, and i suggest you retest with aptx-ll capable equipment.

You are right about that. I knew about the aptX-LL support but forgot to mention it completely. In fact, as I recollect, I tested it on the iPhone 7, so I was looking at standard Bluetooth 4.2 latency and not even the aptX one. The Android phone I used to test for aptX doesn't have low latency support, so even that wouldn't have given me the true picture. Since I returned the BTR1, I am afraid there is no way for me to test this further. However, I have updated my review to rectify this mistake. Thanks!

it seems honest, although i think the antenna is near the headphone socket.

I only speculated that the antenna was located in the bottom section because of the plastic construction. Has this been confirmed by Fiio?
 
Nov 2, 2017 at 6:41 AM Post #58 of 797

FiiO

Sponsor: FiiO
Joined
Jul 30, 2008
Posts
7,612
Likes
3,991
Location
Guangzhou,China
I only speculated that the antenna was located in the bottom section because of the plastic construction. Has this been confirmed by Fiio?
Hi,
Are there any questions with the antenna? We may need contact the engineer about that.
Best regards
 
FiiO Stay updated on FiiO at their sponsor profile on Head-Fi.
 
https://www.facebook.com/FiiOAUDIO https://twitter.com/FiiO_official https://www.instagram.com/fiioofficial/ https://www.fiio.com
Nov 2, 2017 at 6:05 PM Post #59 of 797

Tstorey

Head-Fier
Joined
Jul 17, 2014
Posts
77
Likes
23
Hi,
We tested just now. When one of the collected device is disconected, only once double-beeping would appear. Or this issue happen when walking back and forth?
Best regards

I’ve just picked up a BTR1 primarily to use on flights with my iPad and phone and can confirm the same continuous double beeping when one of the two devices is out of range. It’s only a minor annoyance and I simply disconnect the device I’m not using (IOS11 now allows that instead of “forget this device” that you had to do previously). Other than that, a nice little gadget.
 
Nov 3, 2017 at 6:43 AM Post #60 of 797

FiiO

Sponsor: FiiO
Joined
Jul 30, 2008
Posts
7,612
Likes
3,991
Location
Guangzhou,China
I’ve just picked up a BTR1 primarily to use on flights with my iPad and phone and can confirm the same continuous double beeping when one of the two devices is out of range. It’s only a minor annoyance and I simply disconnect the device I’m not using (IOS11 now allows that instead of “forget this device” that you had to do previously). Other than that, a nice little gadget.
Hi,
Really strange that we tested once again but the double beeping only appear once. Or something I missed? The music was playing in the one which was disconnected? Thanks in advanced!
Best regards
 
FiiO Stay updated on FiiO at their sponsor profile on Head-Fi.
 
https://www.facebook.com/FiiOAUDIO https://twitter.com/FiiO_official https://www.instagram.com/fiioofficial/ https://www.fiio.com

Users who are viewing this thread

Top