[paijo]

My custom LOD from fiio lod pin, mixed brand silver coated 6 strand cables, with OEM jack.

 

[pear]

Custom cable for my Audio-Technica R70x. Made from Canare L-4E5C, Y-split made with self-adhesive heat shrink and the legs "sleeved" with silicone tubing. 
 
Terminated with a pair of locking 2.5mm connectors from AliExpress and a Neutrik/REAN 3.5mm.
 

 

[Wfanning1]

Newest cable, a rare to find so i made them! I must say quite proud of this one! Its used with a sony zx2 to connect to either the alo cdm, the chord hugo and the chord mojo!

 

[vapman]

Trying to make an adapter for MMCX to sony's proprietary ex1000 connector! What a pain. I'm starting to think butchering a cable is my only way to get those connectors. Is it just a single signal wire + ground?

 

[SauceBoss]

 
Thats my latest cable. Neotech NEI-3004 and KLEI Copper Harmony plugs. Sounds wonderfull

 

[GasMaskMan]

-snip-

 

[Cat Man]

http://www.aliexpress.com/store/product/Ultra-High-Quality-Sterling-Silver-Earphone-Upgrade-Cable-6-Cell-For-Shure-SE535-SE315-SE215-SE425/1825606_32573052807.html
I bought this product，try to DIY all by mysely，I need to learn from you

 

[Joel Peterson]

Starting to create some of my own designs for custom audio cables, these are full treated ashwood. If you're interested I've made a few extra and you can send me a PM.
 
 

 

[PinkyPowers]

Warm and elegant. I love it.

 

[DPence]

The latest cable I made for my JH ciems.

 

[m0k4]

8 strand square braid, 0.8 spc wire
 

 

[Wfanning1]

8 strand square braid, 0.8 spc wire can you elaboate a bit or show sone closeups? "8 strand"? Do u mean 8 (.8) wires or one .8 wire has 8 individual strands inside? Also wanba check out that braid very interested in that one! I can do 4 no problem and have done 6 a few times but i hear 8 is almost impossible without a braiding machine?

 

[m0k4]

it is 8 (0.8) wires braided like this http://www.seekyee.com/Slings/howtos/8strand1.htm and after the y split is the same but with 4 wires for side

 

[alpha421]

^good link.  That's the technique I followed with great results.

 

[m0k4]

I find it in the diy cable question e discussion thread in this section