Chord Hugo
Apr 21, 2019 at 8:18 AM Post #15,421 of 15,688
I'm thinking of getting another power supply/charger for my hugo. It originally came with 11v 1.0a charger, just wondering does a 12v 0.5a work in this case as I can't seems to find a 11v 1.0a replacement? Need some advice here. Thanks.
I know that the Hugo has been out of production for 4 years, but are either of @Rob Watts or @Matt Bartlett , able to suggest a good power supply for this owner?
 
Apr 22, 2019 at 2:51 AM Post #15,422 of 15,688
I know that the Hugo has been out of production for 4 years, but are either of @Rob Watts or @Matt Bartlett , able to suggest a good power supply for this owner?

12V 0.5A with 2.1mm x 5.5mm barrel connector will work. Just make sure it is a switched mode type of power supply rather than a linear. You can use higher current so 1A, 2A, 5A are all ok. It is the voltage that is important so you must make sure the voltage cannot go higher than 12V.
 
Apr 22, 2019 at 6:32 AM Post #15,425 of 15,688
Thanks for the response @Matt Bartlett

Why switch mode instead of linear power supply ?
Thank you

Because in general switch mode power supplies are better and controlling (regulating) the output voltage under different loads compared to linear power supplies.
This is important for products like Hugo where the amount of load (current) varies depending on the charge status of the batteries. When we tested some linear power supplies
we found that during trickle charge the load was not enough to keep the voltage at 12V and it increased a level that could cause damage.
 
Apr 22, 2019 at 8:47 PM Post #15,428 of 15,688
I would not use third party charger. The cost of replacing the battery is prohibitively expensive.
 
Apr 24, 2019 at 1:11 AM Post #15,429 of 15,688
If you're using third party ones, make sure to verify the voltage with a multi-meter before plugging into Hugo. Some are rated at 12V but might be way-off like 14v, which would trip the Hugo protection circuits. Also make sure it's center positive.
 
Apr 29, 2019 at 5:54 AM Post #15,431 of 15,688
May 2, 2019 at 5:36 PM Post #15,432 of 15,688
Hi All
I'm a happy owner of Chord Hugo 1 but this DAC is not really portable so I'm looking for a music player which has similar sound signature and sound quality as Hugo 1 but more portable. Please make your suggestions.
 
May 2, 2019 at 6:01 PM Post #15,433 of 15,688
The only dap I have tried is ak 380, ak with oversampling and what not is warm or smooth. Very appealing but not chord analogue transparency so, no help from me.
 
Last edited:
May 3, 2019 at 5:00 PM Post #15,435 of 15,688
Hi All
I'm a happy owner of Chord Hugo 1 but this DAC is not really portable so I'm looking for a music player which has similar sound signature and sound quality as Hugo 1 but more portable. Please make your suggestions.

Questyle QP1R is closest I've heard with a clear upfront sound. iBasso DX200 Ti (limited edition) is better still, but only 66 made. Some being offered now DX220 being released.
 

Users who are viewing this thread

Back
Top