xxx1313
500+ Head-Fier
Another picture of DAVE + EMPYREAN, but no prototype this time. A really great combination, imo.
Something Special, Made in Romania , that happens to be the best sounding headphone in the world of it's kind.Another picture of DAVE + EMPYREAN, but no prototype this time. A really great combination, imo.
Another picture of DAVE + EMPYREAN, but no prototype this time. A really great combination, imo.
The Empyrean is the first headphone that I have found sounds best with Crossfeed off on DAVE. Everything else I have listened to I have preferred Crossfeed set to 2 or 3. Advantage is I don't have to remember to turn it off when listening to the Empyrean and switching to speakers!I see you both use crossfeed off? Just with the Meze or in general?
I see you both use crossfeed off? Just with the Meze or in general?
The Empyrean is the first headphone that I have found sounds best with Crossfeed off on DAVE.
I used the ceossfeed off with the Meze and I liked how it sounds. Tried same with HD820 but resolution, the sound was dry and not of my liking.
The Empyrean is the first headphone that I have found sounds best with Crossfeed off on DAVE. Everything else I have listened to I have preferred Crossfeed set to 2 or 3. Advantage is I don't have to remember to turn it off when listening to the Empyrean and switching to speakers!
Just with Empyrean. I use crossfeed 1 with Utopia.
+1. Same impression here.
Thanks for the info. The problem is that I wanted to use my HEKUnlike with the TT₂ DAVE's balanced outputs are not suitable for headphones, just high-impedance loads. So an adapter from TRRRS to single-ended ¼" will be the solution. Every adapter causes some minor sound degradation, but probably you won't notice it, the less so without direct comparison. Of course you could also reterminate the cable with a ¼" TRS plug...
Thanks for that detailed response. My dilemma is that I have an expensive after market cable that is single ended in the 1/4” plug for the DAVE but I also want to use the HEKse with a DAP that has balanced out. I use the DAP only when on vacation so even though I can reterminate the single ended cable with 4.4 mm TRRRS I would then need to use a TRRRS to 1/4” plug adapter with unknown effect on SQ with DAVE. So I may just have to spring for a new balanced cable.Unlike with the TT₂ DAVE's balanced outputs are not suitable for headphones, just high-impedance loads. So an adapter from TRRRS to single-ended ¼" will be the solution. Every adapter causes some minor sound degradation, but probably you won't notice it, the less so without direct comparison. Of course you could also reterminate the cable with a ¼" TRS plug...
I listened to both, but using an amp in between. I had a clear preference for the Abyss. I posted my comparison in the Empyrean thread.Anyone with an Empyrean, compare it to the ABYSS PHI through DAVE? A lot of comments about Empyrean vs focal, audeze and hifiman cans but nothing comparing it to the Abyss. I am particularly curious about comparative performance vs DAVE because the Empyrean is so much more efficient...
DAVE killer from Sony for the same price point of 8000 UK pounds???
https://www.sony.co.uk/electronics/walkman/dmp-z1#editorial_image_265113465795520044972143
DAVE killer from Sony for the same price point of 8000 UK pounds???
https://www.sony.co.uk/electronics/walkman/dmp-z1#editorial_image_265113465795520044972143
What is so good about it?
Have you seen the specs? Might kill the mojo, that's about it.