SuAnnan
Head-Fier
- Joined
- Feb 23, 2002
- Posts
- 60
- Likes
- 0
Change the earphone and export the electric capacity of coincidence for CT 570 of Panasonic ,Change the course --Sound change. . .
Change the earphone and export the electric capacity of coincidence for CT 570 of Panasonic ,Change the course --Sound change. . .
Receive post electric capacity 220 U 6,3 V that come of at vowel companies at yesterday afternoons( 2) it is heavy to take than ones that imagine at the volumes of electric capacities in DUOREXs, It sets free to be in machine not all right directly and set free, Can't be used when charging the battery to do it in this way, no way. Then, I begin to look for the place inside the machine, still fine, Battery have pieces of place put one a piece of electric capacities into by the lefts of storehouse, electric capacity left has to show outside the machine , Electric capacity join with earphone thread, what machine put just much less, the pins of electric capacity from joining that pieces outside the machine battery insert by the the mouths of box, The that pieces of inside have screw take and bring and go out and make two pins of the electric capacity hold up by the iron plates of mouth, The electric capacity outside is stuck in that battery box interface office closely , the electric capacity of claret is very beautiful!
In addition, are sure while welding that should be careful! Agree very much that the circuit board scraps! ! !
The whole course has taken 30 minutes, after finishing welding, I have a lingering fear a bit, The feeling trembling a bit! Heartily( I the countless to damage! : )
As for the sound? Change! ! Will say again next time.
Change the earphone and export the electric capacity of coincidence for CT 570 of Panasonic ,Change the course --Sound change. . .
Receive post electric capacity 220 U 6,3 V that come of at vowel companies at yesterday afternoons( 2) it is heavy to take than ones that imagine at the volumes of electric capacities in DUOREXs, It sets free to be in machine not all right directly and set free, Can't be used when charging the battery to do it in this way, no way. Then, I begin to look for the place inside the machine, still fine, Battery have pieces of place put one a piece of electric capacities into by the lefts of storehouse, electric capacity left has to show outside the machine , Electric capacity join with earphone thread, what machine put just much less, the pins of electric capacity from joining that pieces outside the machine battery insert by the the mouths of box, The that pieces of inside have screw take and bring and go out and make two pins of the electric capacity hold up by the iron plates of mouth, The electric capacity outside is stuck in that battery box interface office closely , the electric capacity of claret is very beautiful!
In addition, are sure while welding that should be careful! Agree very much that the circuit board scraps! ! !
The whole course has taken 30 minutes, after finishing welding, I have a lingering fear a bit, The feeling trembling a bit! Heartily( I the countless to damage! : )
As for the sound? Change! ! Will say again next time.