[Andykong]

HA-3A Transformer Coupled, Balanced Driven Vacuum Tube Headphone Amplifier

When the exquisite design is accomplished by first-class engineering.
When aesthetics are backed up by rigorous production.
The HA-3A vacuum tube headphone amplifier lets you enjoy your beloved music through your choice of headphones or earphones in a dedicated, engaging, and indulging retreat.

HA-3A might look compact and simple, but Cayin has devoted our renowned engineering, decades of audio equipment manufacturing, and carefully selected performance-based components to make this happen

The HA-3A suggested retail price is US$1599. It will be available to the oversea market by the first week of September 2022.
Local retail price (after tax and logistics) and availability might vary, please contact your local dealer for more detail.

 

[Andykong]

Cayin will introduce its fourth vacuum tube headphone amplifier later this year. This will fill the gap between HA-1AMK2 and HA-6A and will become the final piece of the puzzle to complete our transformer-coupled vacuum tube amplifier lineup.

The HA-3A shares the same design as HA-6A and HA-300MK2. In fact, when we leaked the first photo of HA-300MK2 in late 2021, we placed an HA-3A prototype alongside our new flagship headphone amplifier, and everyone assumes that is a new finishing for our HA-6A. Although the HA-3A incurred a lot of amplification technologies from its bigger brothers, it is a very compact design with a footprint roughly the size of an A4 sheet.

The new HA-3A vacuum tube headphone amplifier will debut at ChengDu International Headphone Expo (2-3 July 2022) tomorrow. We shall provide more detail and photo after the show. The expect available date is early September 2022, but given the delays and complications from the supply chain and logistics we had with HA-300MK2, we can only promise to try out best with this schedule and will keep you informed in this thread.

Subscribed and stay tuned, this is going to be a very fun journey.

This is my home-trail setup. Sorry for the "informal" quality, this is a quick snap from my mobile phone. We shall provide more photos next week.

HA-3A at ChengDu International Headphone Expo (2022)

 

[Andykong]

Notification:

Minor Revision on Cayin HA-3A

Due to supply chain problems, we have to revise our HA-3A vacuum Tube Headphone Amplifier as follows:
Output Tube: from matched pair JJ 6V6S to matched pair Electro Harmonix 6V6GT
Rectifier Tube: from RCA 22DE4 to RCA 25AX4GT
For more detail, please check out HERE.

 

[ThanatosVI]

Cayin will introduce its fourth vacuum tube headphone amplifier later this year. This will fill the gap between HA-1AMK2 and HA-6A and will become the final piece of the puzzle to complete our transformer-coupled vacuum tube amplifier lineup.

The HA-3A shares the same design as HA-6A and HA-300MK2. In fact, when we leaked the first photo of HA-300MK2 in late 2021, we placed an HA-3A prototype alongside our new flagship headphone amplifier, and everyone assumes that is a new finishing for our HA-6A. Although the HA-3A incurred a lot of amplification technologies from its bigger brothers, it is a very compact design with a footprint roughly the size of an A4 sheet.

The new HA-3A vacuum tube headphone amplifier will debut at ChengDu International Headphone Expo (2-3 July 2022) tomorrow. We shall provide more detail and photo after the show. The expect available date is early September 2022, but given the delays and complications from the supply chain and logistics, we can only promise to try out best with this schedule and will keep you informed in this thread.

Subscribed and stay tuned, this is going to be a very fun journey.

Sneaky, I didn't catch that back then at all.

 

[ClicketEKlack]

Which of your new tube amps would be the best match for Focal Utopias?

 

[Erwinatm]

Looks like 6V6 or 6L6 power tubes.

 

[Barnstormer13]

It looks like it’s aimed right at the $1k to $2k market for tube amps. If it sounds good it’s going to be solid competition for something like the Woo WA6-SE.

 

[dadracer2]

Thanks for putting up some photos, now I can wait till the full story is added. Looks very nice in black too.

 

[qua2k]

Will be looking into a tube desktop amp later this year. Timing could not have been more perfect. As long as it has 6.3 and 4.4 full balanced, my wallet be damned.

 

[dadracer2]

Will be looking into a tube desktop amp later this year. Timing could not have been more perfect. As long as it has 6.3 and 4.4 full balanced, my wallet be damned.

From the photos is looks like an unbalanced (6.35 or 3.5) and a 4.4 balanced and 4 pin XLR balanced. I guess we will know for sure next week when Andy releases the complete info.

 

[qua2k]

From the photos is looks like an unbalanced (6.35 or 3.5) and a 4.4 balanced and 4 pin XLR balanced. I guess we will know for sure next week when Andy releases the complete info.

The middle output, next to the 4 pin, is definitely 4.4 balanced. I zoomed in after I posted. I would think the left would be 6.3 unbalanced, looks like it in the first picture anyway. This could be the one for me then. Watching for sure.

 

[dadracer2]

The middle output, next to the 4 pin, is definitely 4.4 balanced. I zoomed in after I posted. I would think the left would be 6.3 unbalanced, looks like it in the first picture anyway. This could be the one for me then. Watching for sure.

Yes, I'm just saying I cannot tell about the output on the left if it is a 6.35 or 3.5mm.

 

[zach915m]

Very excited for this one! ZMF will definitely be carrying it. Have been really happy with our Cayin amps, they are top quality, and of the most versatile on the market.

 

[Andykong]

Will be looking into a tube desktop amp later this year. Timing could not have been more perfect. As long as it has 6.3 and 4.4 full balanced, my wallet be damned.

From the photos is looks like an unbalanced (6.35 or 3.5) and a 4.4 balanced and 4 pin XLR balanced. I guess we will know for sure next week when Andy releases the complete info.

I can tell you this today: 6.35mm + 4.4mm BAL + XLR4 BAL. Cayin used this combination with HA-6A and HA-300MK2, so this become our standard headphone amplifier phone output combination.

 

[dadracer2]

I can tell you this today: 6.35mm + 4.4mm BAL + XLR4 BAL. Cayin used this combination with HA-6A and HA-300MK2, so this become our standard headphone amplifier phone output combination.

Thanks @Andykong