Using Reveal Plugin System-Wide on Mac:
Here is how you can run Reveal plug-in for your Audeze headphone, system wide on your Mac.
1. Make sure you have already installed Audeze Reveal Plugin on your Mac (
https://www.audeze.com/audeze-reveal-plugin)
2. Download
AU Labs from the bottom of this page:
https://www.apple.com/in/itunes/mastered-for-itunes/
3. AU Labs downloads an application itself. So you don't have to install it. You could simply move it to the 'Applications' folder
4. Download
Soundflower from this page:
https://github.com/mattingalls/Soundflower/releases
5. Install Soundflower on your Mac. If you have set the Mac to allow installs only from trusted developers, your installation will stop. In such an event, launch System Preferences and go to 'Security and Privacy' and enable the system to allow installation of Soundflower
6. Restart your Mac
7. If you plan on using with a DAC, connect the DAC to the system now
8. Launch System Preferences and go to 'Sound'. Under the Output tab, choose '
Soundflower (2ch)'
9. Open '
AU Labs' application and make sure 'Stereo In/Stereo Out' is selected on the left pane of the window
9. Choose 'Soundflower (2ch)' as the
Audio Input Device. Choose the connected DAC or the Built-in Output as the
Audio Output Device
10. After you have finished choosing the devices, click the '
Create Document' button on the bottom of the window
11. This would open a window as shown below. In the 'Audio 1' column, under the Effects, open the dropdown and select 'Reveal'. This opens the Reveal window. Choose your Audeze headphone and adjust the dry/wet and the gain and close the window
12. Now you are all set to go. Play a youtube video on your browser and check if you are getting the audio on your headphone.
13. You could use the same procedure to add your own EQ to any of your headphone. Instead on choosing 'Reveal' under the effect, you would choose the EQ option under 'Apple' and you can create your own EQ.