[lukedss]

I thought I would start a thread dedicated to people resourcing their EQ settings in one thread.

I would ask that people share their settings and the platform used for ease of understanding.

Hope this thread can be helpful, the iSine/i4 sound can be so customisable i am looking forward to hearing what people have come up with.

 

[lukedss]

10 Band EQ

 

[lukedss]

Fjhuerta posted this 6 Band

The 10 band EQ of the App uses a Q of 1.414 and the center frequencies are already as listed in the App. The variants I posted are warmer versions of the default tuning. You can do a rough approximation using the following settings in your App and then go from there:

125Hz => 2 dB
250Hz => 1 dB
2kHz => -1 dB
4kHz => -3dB
8kHz => -4dB (optional, remove if you feel edges sound dull)
16kHz => 3dB

 

[lukedss]

Eugene2

A&K Isine settings:
30-380 HZ - 0
500 HZ -2.0 I
750 -2.5
1K. -3.0
1.5K -2.5
2K -2.0
3K -1.5
4K -1.0
6K. -0.5
8K - 18K 0
I like this one tried one of the posted settings seemed to set the vocals back too far for my taste. This one works for me, I'm going to play a little more tomorrow. Someone posted Isine do not work well with AK products I disagree they work fine to my ears...

 

[lukedss]

KMann settings (For UAPP- take 1,2,4,8,9,10) Low Shelf 1 - Analog Bell the rest except for 10 (high shelf)

Some more EQ options

Here are two variants (V1, V2) and finally the original I had published earlier.

 

[Vitandus]

I’ve used the 10-band based on on my FiiO M11, and it sounds a bit dull. Anyone else find an EQ that works for them?

 

[stmiller]

I use tylls eq for my isine10 on the audeze app on itouch 5th gen

32hz ==> 0
64hz ==> 0
125hz ==> 0
250hz ==> 0
500hz ==> - 2
1khz ==> - 3
2khz ==> - 2
4khz ==> - 1
8khz ==> 0
16khz ==> 0

 

[stmiller]

Credit to the op for this

 

[stmiller]

The above is for for the neutron music player on android.

 

[lukedss]

Credit to the op for this

Looks like that could work with UAPP Tonebooster Parametric

As it only has 6 Bands which one should I leave out?

Does anyone know what 'Peak' filter translates to? I don't have Peak as an option in UAPP

 

[stmiller]

Looks like that could work with UAPP Tonebooster Parametric

As it only has 6 Bands which one should I leave out?

Does anyone know what 'Peak' filter translates to? I don't have Peak as an option in UAPP

Peak translates to analogue bell in UAPP

 

[lukedss]

Peak translates to analogue bell in UAPP

I saved 2 presets one with/without 2900/3000 I figured the hz are so close that I didn't need both in my 6 band

 

[Fafner]

Any suggestion/eq preset for LCDi4/SP1000 coupling? Yeah, I know A&K's eq sucks

 

[lukedss]

Any suggestion/eq preset for LCDi4/SP1000 coupling? Yeah, I know A&K's eq sucks

Have you tried KManns EQ settings, they are 10 band i presume they would work?

Might be helpful to share what you have tried for those about to make suggestions

 

[lukedss]

Weird!

So i started this journey with KManns V2 EQ settings and LOVED it, then a week ago I felt the vocals were too muted and it just didn't sound so food.. so I started looking for other EQ settings, came across Brainiacs settings and LOVED those, then 2 days ago those didn't sound so good! so started with STMiller's eq settings which sounded GREAT, then yesterday NONE of them sounded good and I listened with EQ off on my ZX2 and that sounded the best. HA

I must be losing my marbles