I documented a detachable cable mod on the Sony MDR-CD900ST for @digitalreferee The goals for this mod: • Looks good • Minimal destruction • Single-sided stereo socket • Reterminate original cable with 3.5mm plug End of reterminated cable mod is not included because there are enough...

Im considering modding some beyerdynamics dt 770s 600ohm, to be used on motu m4 and I also have the magni 3. The mod is to remove the stock cable and add detachable outputs, options given are: -Single 3.5mm (65,00€) -Dual 3.5mm (100,00€) -mini-XLR (85,00€) -mini-XLR balanced (105,00€) Anyone...

Not sure how many others use these, but their "over ear" pads were much to small for me. I made some adapter plates for using larger pads for those who want that. You could shrink the OD if you just wanted different pads, but not larger. You can grab them on thingiverse

For anyone unfamiliar with @John Massaria, the refined Kennerton Gjallahorn JM Edition carries his initials, as one of the first owners who modified those headphones. So when John posted this Drop x Hifiman R7DX in classifieds, I jumped on it right away. The following are some shots of the mod...

Hi all, so I have recently gotten hold of a pair of CD1700 Sony cans, after being very curious about them for years. Got a nice-looking pair off of Yahoo auctions, however while they do work and produce sound, they have some severe channel imbalance (right ear being louder than the left, and...

My Bl03 has a driver flex and I think it's because of the vent being blocked by my ear. Some say it's the death of an IEM. :( If it is indeed so, I have low hopes for it being replaced so I'm looking ahead now for possible fixes. One of it is to reshell the drivers into a more agreeable...

Repairs and Modifications Hi all, I've recently picked up the hobby of repairing headphones, bought in job lots or as spares/repairs. For many of them the repairs have been quite straight-forward, but when it comes to physical damage; it's rarely a simple fix. Using a 3D Printer however can...

I am a noob with a noob question. I just stumbled upon this thread. I'm intrigued by the idea of using a resistor adapter to raise the impedance-level of a pair of headphones. Would that have any detrimental effect on the headphone's sound signature? Let's obviously assume a sufficiently...

Cleer, a small US based company focused on designing slightly premium casual listening headphones while using Chinese OEM manufacturing, came out swinging at the Canjam 2017 tour. Their new flagship dynamic driver headphone was announced as taking aim at the HD800 in performance for a lower...

So, lately I've been delving down the rabbit hole of custom headphones, specifically custom Grados. I've found a number of different driver options that look pretty cool (both in images and on paper), but of course considering this is such a niche area of audiophilia, I figured I'd ask the...

Hey guys, obviously I'm new here, but i was looking to get my first "audio setup" as far as a pair of over $150 headphones, and also my first amp and dac. I've already done my research and decided on a Fiio k3 (sorry if some of the names i list are off, I'm going off memory) for the amp/dac...

Hey fellow audiophiles! I recently discovered that Vibro Labs is back after receiving an email from their subscription list. Instead of releasing IEM's' like the Sera or Maya, they are now manufacturing and machining different types of wood-chambers for the Fostex T50rp! You can choose to...

Dekoni Audio is pleased to announce a new pad material, exclusive to our new Sony WH-1000XM2 earpads, plus a new type of Pad Product: Dekoni Nuggets! Sony’s WH-1000XM2 is “The Noise-Cancelling Headphone.” Regarded by reviewers in the Industry and the Community as the first travel headphone...

Today I bought a MSR7NC and After only 3 H I decided to mod this headphone for better base and mid range and better soundstagae, What do you need: Only 1 Super Glue like this: How to start: You need to compress MSR7 PADS as below picture: Use Super Glue to Freeze pads, Do the same with...

I've had a really great experience using my Schiit Saga Preamp with my Adcom 5800 power amp (Nelson Pass design 250 watts/channel into 8 ohms, and over 400 watts/channel into 4 ohms) I bought another Saga Preamp and will be using that one with my Acurus a250 power amp soon. I also prefer the...

Hey! Let me just start of by saying that the slider still works no doubt but its more loose and the crack annoys me Any thoughts and idea's?:L3000:

Dekoni is pleased to announce custom-made upgrade pads for HiFiman! These were designed for the round-earcup designed models like the popular HE-400i and new Susvara, and represent a noticeable upgrade in comfort and sound as well as our full range of Elite pad materials to suit your tastes...

Hello guys I've been really impressed with my first Open-Back Headphones (ATH-AD700X). I am in no way an audiophile, but have been lurking the forums and specifically bought these headphones for gaming use only. Now I want to step outside with them but the cables are super long unfortunately ...

Hi there fellow headfiers, let me start of by saying that i own an OEM of the brainwavz hm9 the Reloop RHP-30 and if your gonna ask me where i got the Reloops well i got them from the palm expo at the Reloop showcase thingy in Mumbai. So back to the mod CLAMP MOD: So many people say that if...

ok, so, someone will call me crazy for doing this to beyers, but i wanted to try it for quite some time now i bought my DT770 80ohm last year in January for my birthday, and they are my first serious headphones love them, from the sound to the comfort, but soon after buying them, i got eager to...

Here are the first initial and easiest HEK mods, I call, the rear strips (sissy) mods. :) For the HiFiMan HE 1000.. What this mod does: 1-Wake up its laid back midrange... 2-Elevated its foggy micro detailing from obscurity. 3-Give it's trebles more presence.. 4-Realize & retrieve it's...

HEK Acoustic Coupler Mod: Introduction/Preface: Today we will give the HEKV1 the maximum mods to bring it closer to a HEKV2... Ok here we go... My take , personally is that HEK V1 presentation was definitely intentional to be a surreal large extended soundstage. Just like the HD800 was...