Search results for query: *
  1. member1982

    Austrian Audio HI-X55

    Are these stable, and comfortable? I haven't been using my X55 for several month after one of the pads on the right hand side collpases at the bottom just keeps on depressing into my ear, i only had it for like 7 month of continues use. it became very uncomfortable within like just 10-20 min of...
  2. member1982

    Ultrasone Pro 900 Impressions Thread

    It's the cable in the headband, there is a kink to it, and the signal is not flowing, i have to jiggle it around at a sweet spot, but without opening up the entire thing to find these kinks, i just gave up. But the last time i got it working, it sounds much better than the DXP that it replaced...
  3. member1982

    Ultrasone IQ

    Pretty sure the IQ's mmcx is standard, and i have easily bought a null-audio cable, and now i have my Campfire Mammoth cable (this reminds me i should try the lune to the bass heavy mammoth to "tame it). the mmcx that has a notch and not standard is my Etys ER4
  4. member1982

    Campfire Audio Mammoth

    Just received, really nice case lol.
  5. member1982

    Ultrasone Pro 900 Impressions Thread

    I have the Pro 900 (not the i) circa 2011?, i think then they had the Pro 900i but with the same headband as the Pro 900, and the latest Pro 900i has the similar headband to the DXP. Not sure where they make the Pro 900i now, but the DXP is German Made, and the Pro 900 was made in Taiwan. The...
  6. member1982

    Ultrasone Pro 900 Impressions Thread

    Yes it was like 4 years of daily use, and basically my daily driver, had some issues with my Alessandro MS-2 (but later turned out it was only the jack). But when the Pro 900 no longer works without jiggling the headband to get sound, i just decided it is time to upgrade and 2 options either the...
  7. member1982

    Ultrasone Pro 900 Impressions Thread

    DXP the soundstage suffers a bit maybe due to the large driver it is nearly at my ear vs the 900 which has the driver at the bottom, and pads are bad, tonality wise the 900 has that extra bit of treble (attached on a lot of things) that i like, lower SPL makes it sounds wider maybe. But then i...
  8. member1982

    Ultrasone Pro 900 Impressions Thread

    Yes, i have had sound cut out on the right piece. juggling the cables in the top of the headband fixes it somewhat, but then it didn't. i might need to remove the right piece and investigate. Im not using it since the cut out, i just bought the Ultrasone DXP, but it ain't the same! haha. Only...
  9. member1982

    Ultrasone Signature DXP

    i stopped using them (for long sessions), they hurt my ears. Plus they don't match well (in terms of too much volume) with the ifi Zen Dac. they are now paired with my rode microphone for monitoring / conference calls, that works okay for short period of time. looking for more thicker earpads...
  10. member1982

    Etymotic ER4SR "Assembled in Vietnam"

    If may I ask, when / country / shop did you buy it? also does it have a typo on the box Daul, or did you get the triple flange B version that is Assembled in Vietnam but comes with the triple flange tips.
  11. member1982

    Etymotic ER4SR "Assembled in Vietnam"

    I have send them an email due to the misprint, i need to tell them anyway so they got on top of their QC for the box haha. it can cause confusion for others, or is it only me. I also asked them for differences as well, but yeah, expecting default responses from the CS / PR team. Even if i...
  12. member1982

    Etymotic ER4SR "Assembled in Vietnam"

    Did anyone noticed the misprint? IN THE BOX, it says "Foam, Daul and 3-flange eartips", now i have no idea if this is even genuine (im sure they are), but definitely sloppy. If this is like the first batch of these, i am not that confident if there will be any issues, I understand most supply...
  13. member1982

    Etymotic ER4SR "Assembled in Vietnam"

    Since this can be considered a new model compared to the old "Assembled in the USA" model that was advertised on Amazon AU. I thought i was getting the USA version with all triple flanges, this isn't exactly the model I was looking for and even if they are the same i wouldn't know without any...
  14. member1982

    Etymotic ER4SR "Assembled in Vietnam"

    Just got the package, i was a bit shocked, as the amazon.com.au page said precision matched and assembled in the USA, the price was a bit cheaper than usual at 287 AUD, but since then has jumped to 397 AUD. The seller is Amazon AU, so no doubt it should be legit. i am returning it, as this is...
  15. member1982

    Review: Null Audio Studio Lune Cable

    Initially I have a Null Audio Lune cable for my TF10, this cable lasted 3 years before the connection at the 3.5mm straight jack cuts out and I have to move it around to get sound.   Now my 1.5 years Lune cable MK3 has the left ear has no sound at all :( Not a heavy user of the cable or else...
  16. member1982

    Does anyone know what type of in-ear is David Coulthard using at the Grand Prix

    This is an example picture. Just finished watching the British GP.   http://www.grandprix247.com/wp-content/uploads/2013/05/dne1208jy311-340x230.jpg   Tah.
  17. member1982

    Ultrasone IQ

    oright, it has been about 2-3 weeks... The sound signature is what i call pretty good, it has settled somewhat from the wild first couple of hours. The bass and mids are wonderful (not Pro 900 wonderful thou)... the separation is of depth and not too much of width. When you hear a detail it'll...
  18. member1982

    Ultrasone IQ

    Being listening to the Ultrasone IQ. The sound signature is something I have never heard before.. All this time it has been a wide soundstage with BA in-ear and my Turbine is dynamic but doesnt deliver what the IQ does, this adds depth, and the separation is very well done. I've only listened to...
  19. member1982

    Ultrasone IQ

    As per A2A, it was for the click frenzy and only while stock lasts, the price points of $599/$699 was extremely enticing for a product that wasn't released too long ago. And quiet possibly won't be reduced to these lows for sometime... Maybe until boxing day sales.
  20. member1982

    Ultrasone IQ

    I recently listened to my old Etymotic ER6i, and it was pretty good! the sound signature and everything really enjoyed it, didn't really care if it didn't have too much bass, im all rounder thesedays. So definately matter how they produce the sound and probably the quality of the BA? if there is...
  21. member1982

    Ultrasone IQ

    Quote:   Yeah addicated to audio still have it for that price. Probably carries the same BA driver as the IQ. the 106db sensitivity is actually quiet low for an IEM. Impedance is normal.   I'll get my IQ on 29 or 30th. Yeah i haven't being able to find anything about the TIO, apart...
  22. member1982

    Ultrasone IQ

    Darn price jumped to $699 (on the night of 26th). oh well still a $69 saving regardless due to TRS.. That's probably about right for this, only a really hardcore Ultrasone fanboy would buy it :P lols that would be $1600 spend on Ultrasones (over 4 years so not a lot). lols
  23. member1982

    Ultrasone IQ

    Yeah i know about that, but unfortunately i can't buy it straight away, hoping to grab some extra TRS.. I'll be getting (if the price is still that) on 28th.. So if there is still stock on that day... lols... by all means go for it if you want. Lols im just risking it abit just for that extra...
  24. member1982

    Ultrasone IQ

    i had a look at several, Westone 4R i have listened, didn't really like it "that much" it was clean, nice separation and all, but the texture of the bass unsettles me abit, never have i heard such bass tones so clearly, i think i rather have quantity. Another is the UE 900. but thats run by...
  25. member1982

    Ultrasone IQ

    Thanks, it seems long enough to fit okay on my middish ears. From the pictures it is only a tiny bit width wise bigger than the 4R.. Lols makes for an interesting decision making. And shorter in overall housing length? Kinda interested in getting my next generation to replace my TF10 + Lune...
Back
Top