I think you might be right. Regardless it isn't showing the blue led on the front, so I guess it needs fixing at audio-gd.

Can anyone say EXACTLY what power lead I should have for NFB 11.32? I think I may have found the root cause of my problems as I had to buy both the leads as the seller didn't provide.   The lead I have has '13A 250V' on the plug and '10A 250V' on the connecting end, is that incorrect?

Great. But I still get the same message from the newer installer and don't know how to 'Flash with the newest firmware'   'SETUP LOG:  DATE 2-12-2014 TIME 22:36:42 Installed components : None   Fail to Installed components : audio-gd  Ver1.2.0   Also I have no idea what you mean by that...

Right, I have now found the firmware archive myself after sifting through the 'Audio-gd Digital Interface' thread.   Next problem; which firmware do I need and how to install it. I get the impression its #7 from some posts in that thread, but I am unsure so I tried the 'firmware upgrade tool'...

  I am following the instructions from the 'For the products shipping since 14th May. 2013 .' links. Nothing I downloaded contains those 3 files, a direct link would be appreciated, or any link to 'firmware'. A google search for 'audio gd firmware' leads back to the page already repeatedly...

Thanks I will try updating the usb motherboard drivers.   Where do I get the firmware? All I am going off is this page http://www.audio-gd.com/Pro/dac/USB32/USB32EN.htm which has no mention of the word firmware.

Any further information would be great....

I made a help thread but thought it was worth posting here too.   I have a few questions regarding using this device, but the most important one at the moment is how I get around this message, given whilst installing the 'SETUP' launcher   'SETUP LOG:  DATE 2-12-2014 TIME 19:17:44 Installed...

I get this message when installing following the installation video/textfile   'SETUP LOG:  DATE 2-12-2014 TIME 17:59:03 Installed components : None   Fail to Installed components : Audio-gd USB Device  Ver1.0'   Why? I can't believe it gives no reason, error code, nothing.   I also...

Have you heard both? Which would you choose if you were just going on sound?   I wouldn't use those inputs on the NFB and apparently "The 'input' socket just doubles as the analogue in and the digital line out. It is a switched jack" on the EHP, so they are practically the same to me.

Both are said to be very neutral with lots of detail. So which is more so?   Will be used for music production with Sony MDR 7520's.  

Both are said to be very neutral with lots of detail. So which is more so?   Ill be using for music production with Sony MDR 7520's.

Bump.   Still looking / undecided.   Need something with a headphone output and either a line or rca output for use with active monitors.   Accurate/flat sounding as possible.

Might be worth trying that modification I posted for the 940's on them if they are structured the same internally.

Im surprised to hear you went with the KRKs, I found exactly that with regards to bass after auditioning them yesterday   Ive just came across a thread which is swaying me towards the SRH940s   http://www.head-fi.org/t/653907/shure-srh940-mod   Sounds promising..

Don't seem particularly suited from what im reading so far, is there some reason you suggested them?   Anyone have experience with the 'Mag Dogs'? They sound like they could fit the bill if the bass is adjusted (or left on 'factory' setting) to be flat

I know. Im tempted to start considering some (I heard it was semi open) as I can't seem to find anything that ticks all the boxes by the sounds of it aside from the MDR 7520's.   Im not ok with bass liteness. It's what I found with the KRK 8400 and it was a bit distracting. I have read...

I would've bought these by now if it wasn't so much extra for shipping and handling.   Does anyone have experience with DT880s? How they would fare for studio use..   Also KG Jag could you comment more on the SRH940's compared to the others discussed, or anyone else that has used them for...

Just checked out the GMP 450 PRO, im put off by the bad clamping force and bad isolation to be honest, like I was the K550's.

Ive been reading some really good things about them.   I started off with your Sony recommendation KG Jag, ended up discovering the MDR-7520's (which are discontinued here in the UK but I can pay a little to get them imported) which sound incredible, then found they were being compared with...

If I go a little over budget I can get Focal Spirit Professionals. Worth it?

  The Sonys are half the price of the KRK's, is that reflected in their performance? Could you comment on the Senn HD380, curious as they're touted as monitoring headphones with 'accurate sound reproduction' on the site.

Both of those headphones sound exactly what I was looking for, thanks. Whats are the '940's?   Also, both of those are around £100 and im willing to spend upto £200, do you know of any a little better than those two with the same characteristics?

Those arn't really my ratings as ive not tested any of them, more conclusions based on majority opinion from this site and others. I may not be wording things quite accurately with regards to my 'ratings' though.   I am looking for something accurate, flat, closed back (or semi open if they...

Like the title says, im still looking for something that is accurate, flat, closed back (or semi open if they still offer reasonably good isolation), no colouration   So far here is what ive been recommended and the conclusions I came to with further research etc on each, I am still open to...