Search results
  1. Phoniac

    RME ADI-2 Pro - DAC, Headamp, an a lot of more stunning features

    Pretty sure the headphone amp died independently from switching. If you follow their forum they had their share of broken output amps (chips), where balanced played no role at all. Pure coincidence here. As long as the chip itself doesn't die unexpectedly the headphone amp can not be destroyed...
  2. Phoniac

    RME ADI-2 DAC Thread

    That link to the updated manual is outdated. They changed it to http://www.rme-audio.de/downloads/adi2dacr_e.pdf
  3. Phoniac

    RME ADI-2 DAC Thread

    Quite obviously the FS doesn't have USB. And no DSP for all kinds of processing.
  4. Phoniac

    RME ADI-2 Pro - DAC, Headamp, an a lot of more stunning features

    You can. There is only one firmware for all iterations of the Pro (read the firmware updater's readme). Pretty easy.
  5. Phoniac

    RME ADI-2 DAC Thread

    Here too. How do you do the reset? I push the top encoder and the VOL key while switching on.
  6. Phoniac

    RME ADI-2 DAC Thread

    Definitely not! You did not give up, found the real problem, fixed it, and even had the guts to tell us all - I applaud such behaviour! But when I reset my DAC it returns to Width 1.00, so no idea what changed it to 0 on yours.
  7. Phoniac

    RME ADI-2 DAC Thread

    And it is subjective self-delusion like this, derived without precise volume matching and accurate comparison, that is the only real difference. Your description of the missing properties are typical audiophile placebos. There is no 'authority' problem with the RME unless you try to drive a HE-6.
  8. Phoniac

    RME ADI-2 DAC Thread

    All of these are easy to drive for the RME up to ear-bleeding volumes.. Sounds more like another one that missed the High Power setting...
  9. Phoniac

    RME ADI-2 DAC Thread

    Note that the picture that you posted - this kind of view you will not get. The Anniversary edition had 3 or 4 LEDs inside with extra top cover to illuminate the PCB. These LEDs are not found in the other ADIs (yours). Not to mention that you loose warranty when you start to open and cut the...
  10. Phoniac

    RME ADI-2 DAC Thread

    That's easy. Use the included EQ, dial in +12 dB in band 1 set to shelf, frequency 65 Hz, Q 0.8. Turn on High Power mode. I do the same with the LCD-X. If the rumbling is not hard enough dial in another +6 dB from the Bass control...
  11. Phoniac

    RME ADI-2 DAC Thread

    In fact that's an advantage. Due to the very low output impedance of only 0.1 ohms you could use unshielded cable to your amplifier - it would still work. IMO an external controller, no matter if passive or active, will have more potential to degrade the sound than the additional 'headphone op...
  12. Phoniac

    RME ADI-2 DAC Thread

    You can use the Phones Output 3/4, or even 1/2, as Line Out. See manual, works perfectly and you are back to comfortable switching.
  13. Phoniac

    RME ADI-2 DAC Thread

    https://www.head-fi.org/threads/rme-adi-2-dac-thread.868015/page-69#post-14819442
  14. Phoniac

    RME ADI-2 DAC Thread

    You have both the ADI and the Violectric. Why are you not just trying/doing it? Connect the Focal's to the ADI in Low Power mode, put on some bass heavy music that includes 50 to 60 Hz, then cramp up the volume until your ears bleed - while looking at the level meter below the Analyser. If you...
  15. Phoniac

    [review/comparison] Prism Lyra, Prism Callia, RME ADI-2 Pro, Schiit Yggdrasil, Forssell MDAC-2a

    I have to disagree here. I have never seen a unit where Loudness was NOT coupled to the volume knob position. And I have used many devices in my life with that function. You have an example of a unit where Loudness is really 'fixed'?
  16. Phoniac

    [review/comparison] Prism Lyra, Prism Callia, RME ADI-2 Pro, Schiit Yggdrasil, Forssell MDAC-2a

    No offense, but I find your description/explanation misleading, especially 'static' and 'dynamic EQ'. The former loudness versions were a fixed EQ setting that was blended in with the current volume setting. I wouldn't describe this as 'static' as the EQ effect does change. And it is not...
  17. Phoniac

    RME ADI-2 DAC Thread

    "WASAPI Event would be the correct way to use it. But you are right, that only works with 44.1 kHz, at 48 kHz it is distorted. This is clearly a bug in Foobar or the WASAPI component, as it also happens with a different third party DAC, and does not happen in Roon."...
  18. Phoniac

    RME ADI-2 DAC Thread

    Yeah, sure. Now that your objective arguments are gone it's back to subjective audiophoolism...
  19. Phoniac

    RME ADI-2 DAC Thread

    Fortunately none of what you list relates to the ADI-2 DAC. Expensive op amps - check. No cap in signal path - check. Oversized power supply - check. Then get yourself the one from this thread's title, might change your view.. Output impedance 10 Ohms unbalanced, 20 Ohms balanced - not...
  20. Phoniac

    RME ADI-2 DAC Thread

    I share your enjoyment, but the new Q value goes up to 9.9 (or simply 10), and the value is not dB. it's just a number. Happy Holidays!
  21. Phoniac

    RME ADI-2 Pro - DAC, Headamp, an a lot of more stunning features

    Another "Christmas" update to 185/90: https://www.forum.rme-audio.de/viewtopic.php?id=28058
  22. Phoniac

    RME ADI-2 DAC Thread

    That's a really bad idea. Firmware is now on 26/24, with numerous serious bug fixes that you might misinterpet as 'sound signature' when running into it, especially the (sometimes only slightly) distorted sound playback over USB after using SPDIF. The firmware update takes less than a minute and...
  23. Phoniac

    RME ADI-2 DAC Thread

    So when will you replace the Naim, as you can't accept a product that is built to cause problems? :beyersmile:
  24. Phoniac

    RME ADI-2 DAC Thread

    No, you don't. I did not come up with that statement, and therefore I don't have to proof anything. Analyzing the rest of your bla bla it's obvious that you now try to cirumvent and drift away from your initial statement, which is pure phantasy but presented as fact.
  25. Phoniac

    RME ADI-2 DAC Thread

    Did I misunderstand that statement or are you accusing RME of paying reviewers to write (positively, obviously) about their ADI-2 DAC? If so can you provide any proof for this serious claim?
Top