Search results
  1. MonkHead

    help with a meggitt pot...

    hi, well i got this meggitt pot. this is the best one i managed to find around here, anyways im having an hard time figuring out how to connect it to the pcb of my current pimeta project. logic tells me it aligns with the pcb layot- exactly like the alps or the panasoic(its not pcb mount), but i...
  2. MonkHead

    Looking for a DIY'er to mod a an ART DI/O

    I'd be glad to help you out if you'd like me to. although im more into giving you an extra hand rather then modding the entire thing. CHEERS
  3. MonkHead

    Breathing problem...?

    wow! you just described the exact same symptoms that i have been suffering from for the last few months, especially that yawning and the need to take a big deep breath rather frequently- sometimes its really annoying. im 18y old and im in pretty good shape. i think that it has something to do...
  4. MonkHead

    3.5 jack or 6mm jack?

    It would be wiser to use the 6mm jack because it is sturdier then the smaller one so it is more likely to survive abuse and plug "jiggling". CHEERS
  5. MonkHead

    Soldering SOIC-8 opamp to a BrownDog?

    im doing it with a 0.050 solder- the only size i have available around me. you should probably go for a smaller diameter solder, 0.025 would probably save you from alot of hassle it really is simple once you get the hang of it. CHEERS
  6. MonkHead

    Pimeta problem

    oh, thx. so you should probably update your guide because i borrowed this solution from you while i had problems with my pimeta. CHEERS
  7. MonkHead

    Pimeta problem

    Quote: Originally Posted by Kenny12 ok, found the problem, i was using dual in ground and single in opamp . anyway working fine now... but there is interference, am i supposed to ground the case to the input ground cause there is hum.. when i touch the case/ volume pot etc...
  8. MonkHead

    Soldering SOIC-8 opamp to a BrownDog?

    you dont need anything fancy, just twizers and a pair of steady hands. you hold the chip and the adaptor together tightly with the twizers' just make sure not to apply too much force and your good to go- just start soldering the parts together. i usually solder two of the opposite pins and take...
  9. MonkHead

    Vishay Dale resistor part #s

    yup, youll need to use 200-220 resistors.
  10. MonkHead

    Having problems with my DMM

    hey thats a great idea. thanks. CHEERS
  11. MonkHead

    SO-8 Package - How do you solder these suckers?

    would it be wise to clean the flux after the soldering? is there a special way to do it if so? CHEERS
  12. MonkHead

    Having problems with my DMM

    yeh the leads give me a reading of around 0.05 ohm when i short them before measuring. like i said i can get a stable reading only when i press on the resistor leads really hard, or if i hold the leads of the multi' and bind them to the leads of the resistor with my fingers- doing the...
  13. MonkHead

    Having problems with my DMM

    Hi, well i bought this expensive el-chippo DMM the other day got it for around 30$, it is made by a chinese manufacture named UNI-T. Anyways, im having an hard time taking measurements with it. if i want for example to test a resistor, i really need to squeeze on his pins to get a stable...
  14. MonkHead

    Getting Started

    read the stickys! go to Tangents site and read everything over there, find yourself a nice book for beginners etc. just read everything u can lay ur hands on. Im also a novice diy'er, i started just a few weeks ago and i can tell you that i learned alot! just read read read thats the best advice...
  15. MonkHead

    Sennheiser HD-497 cable...

    How did you make those mini connectors? CHEERS
  16. MonkHead

    What's happened to by AT-A900s ? (pic)

    I STILL think its kinda'v weird that a product is being released to the market with such, shoul we call it weird design parameters(to be politically correct ). Dunno, usually wierdnesess(sp?!) like that will easily cause any consumer product to fail the QT. for eg. would you buy a receiver...
  17. MonkHead

    What's happened to by AT-A900s ? (pic)

    well it seems to be like a defect in the construction, maybe the package suffered some serious shaking while it was shipped? im 100% sure its not part of the original design. CHEERS
  18. MonkHead

    What's happened to by AT-A900s ? (pic)

    Sure, the sound is the most important thing, but when u buy a NEW product u expect for it to come in a NEW like condition Does it have any other manufacturing flaws except this one?! Im thinking about buying a pair... CHEERS
  19. MonkHead

    dmm for the novice diy'er?!

    Quote: Originally Posted by Demolition In January, I bought a Mastech MY-64 to replace my old, wrecked WaveTek DMM. I was a bit skeptical about its quality and accuracy, but it has turned out to be a good product with features that I would have expected from more expensive DMMs. It cost...
  20. MonkHead

    dmm for the novice diy'er?!

    Hi, well i need a reasonable dmm that will be cheap but practical. i need something that i could score for 30-50$ and will be reasonably accurate so ill be able to check and measure parts. CHEERS
  21. MonkHead

    Plz share your experience with NTE electronics

    thx for your feedback guys, well then i guess ill go buy some.Oh and Sewer Guy- why are they so expensive?! here(israel) theyr much cheaper.
  22. MonkHead

    Plz share your experience with NTE electronics

    Hi, well their parts are really common around here and i thought about buying em. Do u guys have any experience with them? http://www.nteinc.com/ thx in advance...
  23. MonkHead

    Alessandro MS-1s

    Im also very interested to hear about those alessandro's... does any1 here compared them to the grados? (60/80/125)
Top