-
-
unispeed replied to the thread SE846 "Less is More" by UNISPEED.Remove only the foam. The filter at the base of the blue filter remains untouched. It's actually a white knowles filter without the...
-
unispeed replied to the thread SE846 "Less is More" by UNISPEED.The end result needs to look like this. The filter cloth needs to be closer to the outside. This is a revision for STEP 5. I've also...
-
unispeed replied to the thread SE846 "Less is More" by UNISPEED.This would explain why the plastic inserts are fitting so tight. Even a 2.05mm is not enough as the final bore. You need to find a...
-
unispeed replied to the thread SE846 "Less is More" by UNISPEED.Due to how thin the wall of the plastic housing becomes after drilling it, it is quite delicate. My final bit size is 2.1mm. In the...
-
unispeed replied to the thread SE846 "Less is More" by UNISPEED.Look at steps 3 and step 4. In step 3 you drill the insert outside the nozzle. Then in step 4 you push the insert in the nozzle and...
-
unispeed replied to the thread Shure SE846 Impressions Thread.Hi Guys. I released a new filter mod. If you're curious go here: https://www.head-fi.org/threads/se846-less-is-more-by-unispeed.927658/
-
unispeed posted the thread SE846 "Less is More" by UNISPEED in Portable Headphones, Earphones and In-Ear Monitors.This is a direct successor to my "Engineer Mod" which can be found here...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…