-
-
Zzt231gr reacted to Rob Watts's post in the thread Chord Electronics Qutest DAC - Official Thread with Like.It needs to be 5v +/-0.25v - the USB standard. It will be fine with a USB power bank, as to get the higher voltage for fast charge...
-
Zzt231gr reacted to Reactcore's post in the thread Chord Electronics Qutest DAC - Official Thread with Like.@headstef I would better try figure out what its minimum voltage is.. see if it takes a safe 4,5v from 3 cells. I know it has an...
-
Zzt231gr reacted to headstef's post in the thread Chord Electronics Qutest DAC - Official Thread with Like.Does any one know if the Qutest can work safely with a voltage of 6+ Volts? I wonder if I could try 4x1,5 volt D-size batteries to...
-
Zzt231gr reacted to rq1111's post in the thread Chord Electronics Qutest DAC - Official Thread with Like.I just realised how good is Chord Cutest recently. I had the Chord Cutest with me for more than 4 years but only recently then I...
-
Zzt231gr reacted to jjazzy's post in the thread Chord Electronics Qutest DAC - Official Thread with Like.I heared quite the difference, but NOT positive way. I did not like what the sbooster did. I still remember connecting it new, 1 hour...
-
Zzt231gr reacted to SONDEKNZ's post in the thread Chord Electronics Qutest DAC - Official Thread with Like.Earlier in this thread, CHORD designer Rob Watts confirmed that the 1V and 2V output options on the QUTEST are simply the same 3V...
-
Zzt231gr reacted to jjazzy's post in the thread Chord Electronics Qutest DAC - Official Thread with Like.Looks promising, it all depends how quiet are the power regulators used with the batteries.
-
Zzt231gr reacted to Charente's post in the thread Chord Electronics Qutest DAC - Official Thread with Like.This battery power supply is now available over here in France ... Has anyone used this with the QUTEST ?
-
Zzt231gr reacted to headstef's post in the thread Chord Electronics Qutest DAC - Official Thread with Like.However, there is no way to hear a sound quality difference between 96 kHz and 192 kHz sampling rate - if this is the only difference...
-
Zzt231gr reacted to headstef's post in the thread Chord Electronics Qutest DAC - Official Thread with Like.If I am not mistaken the Qutest is immune to incoming jitter. If this is the case, any TOSLINK optical output that at least complies...
-
Zzt231gr reacted to jjazzy's post in the thread Chord Electronics Qutest DAC - Official Thread with Like.Buy a Allo Shanti PSU, I can assure you how shocked you are, how much better the qutest will sound. I was sceptical and bought one...
-
Zzt231gr reacted to jjazzy's post in the thread Chord Electronics Qutest DAC - Official Thread with Like.I agree on the natural levels of the qutest, their is nothing wrong with the bass output. Nowedays it is even hart to find high end...
-
Zzt231gr reacted to Reactcore's post in the thread Chord Electronics Qutest DAC - Official Thread with Like.Be shure you tried toslink input too with all other inputs disconnected. Its the best isolation against groundloop noise and grainy...
-
Zzt231gr reacted to Digital Enigma's post in the thread Chord Electronics Qutest DAC - Official Thread with Like.Depends on the source quality, I’d go for optical as a safe guess if you’re not sure. Jitter isn’t a problem.
-
Zzt231gr reacted to Currawong's post in the thread Chord Electronics Qutest DAC - Official Thread with Like.If anyone hasn't yet seen, here is my Qutest review.
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…