[moedawg140]

Yeah these new sizes are confusing.
On the website they only list the compatability for CP240 and not others. They say Campfire IEMs should use CP240 but the nozzle size is smaller then CP100 so not sure if it will fit. 
CP100 is like 4.5mm and CP240 is 4mm

Both the CP100 and CP240 fit my Andromeda, but since the CP240 is a little narrower, the fit is slightly more snug when placing on the IEM nozzle.

 

[nekromantik]

Both the CP100 and CP240 fit my Andromeda, but since the CP240 is a little narrower, the fit is slightly more snug when placing on the IEM nozzle.

 
Yeah that makes sense. The CP100 is slightly wider then CP240. CP220 is wider so I might try that with my Nova.
Prefer less tight fit as when removing tight ones they tend to break more easily. 

 

[moedawg140]

Yeah that makes sense. The CP100 is slightly wider then CP240. CP220 is wider so I might try that with my Nova.
Prefer less tight fit as when removing tight ones they tend to break more easily. 

I've never had a quality silicone tip break whilst removing from a nozzle -- SpinFit tips (including supremely tight fits on nozzles of a certain manufacturer [cannot say]) are pretty durable and shouldn't break, especially if you use tip removal techniques such as pinching from the top then pulling, holding from the IEM housing tightly and pulling the tips straight up, or pulling a portion of the tip's base out of the nozzles by 90° increments.

 

[Champagne]

Hi, can I know which model fits Westone W40? Is the single flange and double flange using the same patented technology that allows 360 degrees rotation?

 

[tunes]

Does the very tip of the sound tube with the small openings fit flush with the end of the silicone hole on the CP-240M or is the end of the sound tube recessed and how does this change sound signature?

 

[LaughMoreDaily]

The 220/230/240 are all different bore sizes with the 230 has the largest and the other 2 are smaller, similar bore size with the 240 being longer overall. Within those 3 sizes you have your typical s, m, l etc. But some like the 230's are only available in limited sizes for example only Medium in 230. Not sure if more sizes will be available when products become more available. I have the 230's for my 1more quad driver and they fit perfectly.

I'm usually a Large, so I wonder if a Medium would fit me, I'm assuming not... are you usually a Medium?

 

[LaughMoreDaily]

Hi, can I know which model fits Westone W40? Is the single flange and double flange using the same patented technology that allows 360 degrees rotation?

All Spinfits do the same thing in terms of rotation

 

[moedawg140]

Hi, can I know which model fits Westone W40? Is the single flange and double flange using the same patented technology that allows 360 degrees rotation?

The CP800 as Westone products (and others such as Shure, Sensaphonics, etcetera) use narrow nozzles.

SpinFit tips do not rotate 360 degrees or at all, about half (the top portion) of the tips pivot.

Cheers

 

[moedawg140]

All Spinfits do the same thing in terms of rotation

The SpinFit tips do not rotate; about half (the top portion) of the tips pivot. :normal_smile :

 

[nekromantik]

I've never had a quality silicone tip break whilst removing from a nozzle -- SpinFit tips (including supremely tight fits on nozzles of a certain manufacturer [cannot say]) are pretty durable and shouldn't break, especially if you use tip removal techniques such as pinching from the top then pulling, holding from the IEM housing tightly and pulling the tips straight up, or pulling a portion of the tip's base out of the nozzles by 90° increments.

Ah ok
I had Meelec tips break often on my FLC8s.

 

[moedawg140]

Ah ok
I had Meelec tips break often on my FLC8s.

You should be good to go with SpinFit tips. If not, I would like to find out what your strength itinerary/workout is. Hehe (joke).

 

[LaughMoreDaily]

 
Yeah that makes sense. The CP100 is slightly wider then CP240. CP220 is wider so I might try that with my Nova.
Prefer less tight fit as when removing tight ones they tend to break more easily. 

That's because your ears are made of concrete.

 

[LaughMoreDaily]

If the MEMT X5 Large double-flange tips fit good, but want a better fit, which double-flange spin fits should I get? Thanks.

 

[808Ronin]

  I'm usually a Large, so I wonder if a Medium would fit me, I'm assuming not... are you usually a Medium?

 
Yes.

 

[808Ronin]

Does the very tip of the sound tube with the small openings fit flush with the end of the silicone hole on the CP-240M or is the end of the sound tube recessed and how does this change sound signature?

 
They do not sit flush with the end of the nozzle, and there is some change with the sound signature. I havent listened enough to fairly say good or bad yet. I can only speak for the 230's but i imagine its the same for the other twin blades.