DDC - Digital USB interfaces - Xmos or Amanero Combo384 based - Raspberry Pi - HifiBerry DAC+ Pro - reviews, comparison, modifications and USB-Audio in general
May 6, 2017 at 7:12 AM Post #556 of 569
Hello Riemann,

Thanks for all the info!

This one I saw before and is most interesting. Maybe you can investigate if there are more specs available from this manufacturer, like ESR values. Is there a website available for Qinfen?

https://world.taobao.com/item/53154...158&pvid=517e41c1-65db-41d0-b920-361264c7581b

TB27KjroFXXXXasXXXXXXXXXXXX_!!2460326804.jpg



This one is very good I think but very expensive, very big and very heavy, 4,2Kg !!

https://world.taobao.com/item/52863...24849311d2edeac9&spm=a312a.7700714.0.0.9AUrrV



TB11tKDQVXXXXbFaXXXXXXXXXXX_!!0-item_pic.jpg_600x600.jpg


These are very nice too,

https://world.taobao.com/item/548992047294.htm?spm=a312a.7700714.0.0.SYN1vm#detail

TB2zF6boylnpuFjSZFgXXbi7FXa_!!661664963.jpg


TB29S5notBopuFjSZPcXXc9EpXa_!!661664963.jpg


TB2ZFdYjncCL1FjSZFPXXXZgpXa_!!661664963.jpg


TB2UCTqoC8mpuFjSZFMXXaxpVXa_!!661664963.jpg


And these,

https://world.taobao.com/item/523052894620.htm?spm=a312a.7700714.0.0.SYN1vm#detail

TB2FzkogXXXXXXvXpXXXXXXXXXX_!!2650781406.jpg


https://world.taobao.com/item/523031555314.htm?spm=a312a.7700714.0.0.SYN1vm#detail

TB2HXiOgXXXXXboXpXXXXXXXXXX_!!2650781406.jpg


https://world.taobao.com/item/549133465896.htm?spm=a312a.7700714.0.0.SYN1vm#detail

TB2W3_gmB0kpuFjSsppXXcGTXXa_!!1588864024.jpg



Thanks for this link, they are very cheap!!!

https://world.taobao.com/item/536302242514.htm?spm=a312a.7700714.0.0.0XQuzI#detail

TB2OPB2Xai5V1BjSspdXXXyFFXa_!!808440475.jpg_600x600.jpg



For Amanero, max is 5.5V, but do you also know minimum voltage?
This is most important because of lowest set voltage for ultracaps to reach longest runtime

Cheers!

Alex
 
May 6, 2017 at 7:24 AM Post #557 of 569
Hello Riemann,

I forgot, you use this Amanero?

9808218_thumb.jpg

9808222_thumb.jpg


You told me before it can accept 3.3V to 5V (which is 5.5V max), so this means you can use ultracaps seting
with voltage drop from 5.4V (max of 2x2.7V ultracaps) to 3.3V.

Sad thing is, as the picture shows, it consumes 250mA which is a lot power.
Runtime of ultracaps will be very short. Probably you will have to go for the bigger and more powerfull ultracaps,
at least the 350F Maxwell / Lishen, or the monster ultracaps 3000F from Maxwell, but those are expensive.

Please take a look at these, can you ask supplier which version he sells since there is 3000F / 1200F and 700F in his advertisement.

https://world.taobao.com/item/44672748313.htm?spm=a312a.7700714.0.0.FMLmy6#detail

TB2IkX8gFXXXXcqXpXXXXXXXXXX_!!2460326804.jpg


These would be best to use for your application, you need 4 pieces.


Cheers,
Alex
 
May 6, 2017 at 8:30 AM Post #558 of 569
May 7, 2017 at 11:33 AM Post #559 of 569
May 8, 2017 at 4:21 PM Post #561 of 569
Hello Riemann,

Yes it is, not sure if it is wise to buy from this seller....

In the meantime, I ordered 8x DA-M1 discrete R2R dacs from AGD, configured in push-pull configuration,
which means 4 da-m1's per channel.......

I will keep you posted on how this will sound in comparisson to AK4495......

Thanks for all your help!

Regards, and C H E E R S :)

Alex
 
Last edited:
Jul 7, 2019 at 12:18 PM Post #563 of 569
The latest version 10.6.2 of Amanero driver for Win 10 is available:

https://amanero.com/drivers.htm
Anyone out there had to flash Audio gd version of Amanero with linux compatible firmware, like last 2006be10? Without that, mu R7HE can't play native dsd sent by Auralic Aries G1...Procedure may be different due to different board layout...
 
Dec 22, 2020 at 6:38 AM Post #564 of 569
Jan 13, 2021 at 9:33 PM Post #566 of 569
What is a few of the best usb dongles that connect my laptop to my dac that would result in a marginal sound quality increase?

Aurorasound Bus-Power Pro 2 would not hurt. It leaves the data unchanged, but isolates it completely from computer power noise.
 
Jan 15, 2021 at 8:00 AM Post #567 of 569
Aurorasound Bus-Power Pro 2 would not hurt. It leaves the data unchanged, but isolates it completely from computer power noise.
I can't read Japaneese, but is seems to be external power injector, not a galvanic isolator.
When connected to the Amanero module in Audio GD DACs (which do not draw power from the bus) it will do nothing.
 
Jan 15, 2021 at 12:56 PM Post #568 of 569
I can't read Japaneese, but is seems to be external power injector, not a galvanic isolator.
When connected to the Amanero module in Audio GD DACs (which do not draw power from the bus) it will do nothing.

Normally USB has noisy power running from computer to wherever you plug the cable in. If your DAC has perfect galvanic isolation, that isn’t an issue.
What BusPower-Pro does is it removes the link with computer power completely, substituting its own clean power instead. Data is passed through as is.

Whether this type of device makes an improvement to Audio GD I cannot say, no experience with Audio GD.
 
Jan 15, 2021 at 2:47 PM Post #569 of 569
Normally USB has noisy power running from computer to wherever you plug the cable in. If your DAC has perfect galvanic isolation, that isn’t an issue.
What BusPower-Pro does is it removes the link with computer power completely, substituting its own clean power instead. Data is passed through as is.
This device only cut PC 5V power wire and injects its own. It doesn't say anything about galvanic isolation, so the noise still comes through the USB ground wire. I hope I made it clear.
 

Users who are viewing this thread

Back
Top