but not daymn

very cool, for a second I thought u actually spilt paint all over them... What will you be plugging the 4 pole jack into?

100% fake dude, such a poor attempt too, the headband just looks totally screwed up, and the pcb on the drivers is green... There's no doubt about it. Quote:  

How will these compare to my much loved M50's?   What exactly does the dual diaphragm do for the sound?

whatever you do, steer clear of the Beats, all overpriced and sound bad especially at their price point...   I could easily recommend the ATH-M50's I LOVE THEM   Others all full-sized, over ear closed backs (from what I've read over the years)   Please check my profile to see my...

unless you're planning on using them for travelling a lot on noisy transport, then I would suggest active noise cancelling cans... however most closed cans usually do a good job of passive noise isolation, I would say that they would definitely do the job for noise isolation even when on...

behind the bush is probably a full sized hi-fi and desktop amp, playing a cassette, and she's probably on the treadmill in the garden...

http://tinyurl.com/3mexlhu http://tinyurl.com/44wleck

how much are those a piece/batch prices, and a website where u buy them? thanks and could u post pic of the internals if you have time? how does the size of the barrel compare to the switchcrafts, as I like their size and quality, I now hate working with the neutriks since using the...

My first attempt at a Y split headphone cable for some broken portapros that were broken off ebay for just £5.   (please excuse the ghetto Y split, I only had some belkin ofc speaker wire, which is quite thick, initially I wanted to use a spare 6.0 OD neutrik barrel as a splitter, but...

I was actually using a 3 braid, as speaker wire was too thick for the barrel, but if you can get 4 cables into the termination then that's the best way, I split the ground at the split and soldered on the extra 2 grounds, for each driver, used some electrical tape, then aluminium tape on tape...

  My first attempt at a Y split headphone cable...   (please excuse the ghetto Y split, I only had some belkin ofc speaker wire, which is quite thick, initially I wanted to use a spare 6.0 OD neutrik barrel as a splitter, but the barrel wasn't large enough for the four wires, in addition...

My first attempt at a Y split headphone cable for some broken portapros that were broken off ebay for just £5.   (please excuse the ghetto Y split, I only had some belkin ofc speaker wire, which is quite thick, initially I wanted to use a spare 6.0 OD neutrik barrel as a splitter, but the...

Quote: you jka   and to go along with my 100th post:

Not tried it myself.. I don't see why not. My friends cousin had 3 pairs of solo's (not sure if they were hd, prob not) and 1 pair of studio.   Yes he is an idiot lol...   But I listened to them and they're about 5 times worse than the studios, which are pretty bad, and especially at...

Well for the ultimate silence, without having to crank up the volume too much I believe the Bose Q15, is one of the best and highly favored on here.   I haven't done a 1on1 comparison with these but have heard all of Bose's headphones in the past and the P5's not too long ago.   I know...

ok after doing some research, the ksc75 has the same headband connector as the portapro, as you can install the ksc75 drivers into the portapro headband, and from one of the threads I found that 1 of the headphones I was looking should fit with my portapro drivers.   I managed to find them...

thank's for a swift reply, ok I'm thinking of buying these ear pads.   not too sure on headband as it looks a bit weak, and as I'm in the UK I would have to buy it from somewhere else, I have been asking sellers on ebay for different items if the drivers are detachable... so far 1 reply for...

Hi everyone, I recently bought some broken portapros off ebay for just £5, I've soldered tha cable back onto the drivers, and re-terminated with a neutrik mini. The left side of the headband which holds the left driver housing has snapped off.   Originally I was going to use them inside some...

using a multimeter will solve this problem, just check your connections right before soldering, that way you can't go wrong

1 - RnB 2 - Hip-Hop 2 - Electro House   I would also review them on Youtube and do an unboxing.   UK

http://www.ebay.co.uk/itm/3-5mm-4-Pole-Jack-Plug-Audio-and-Video-Soldering-/380349316915?pt=UK_Computing_CablesConnectors_RL&hash=item588e95ff33#ht_1752wt_989   not quite but almost...

Quote: Same as me, when I got the JVC HA-S650 I did that too, significantly increasing strength, lifetime and reducing susceptibility to tangling. I only had UV green sleeving, so it's unique...  

It's just the generic el cheapo 3.5mm connector you can get anywhere in the world online or from your local stores. Personally I wouldn't go cheaper than the Neutrik REAN 3.5mm less than £/$1, or if you can step it upto Switchcraft's 3.5mm, or many premium connectors.