Search results for query: *
- Users: safeandsound1
- Order by date
-
The HeadAmp GS-X and GS-X MK2 Thread
Canta Ista, the GS-X must have a balanced input signal in order to output balanced. If you input a single-ended signal, then you will only get a single-ended signal out of the amp even through the XLR's- safeandsound1
- Post #746
- Forum: High-end Audio Forum
-
The HeadAmp GS-X and GS-X MK2 Thread
Can't we just leave things like this: If you hear transformer hum and it bothers you, place the two parts of the GS-X side-by-side or on separate shelves. There is 4 ft. of umbilical between them for that purpose. If you do not hear the hum or if you do and it doesn't bother you, then arrange...- safeandsound1
- Post #734
- Forum: High-end Audio Forum
-
The HeadAmp GS-X and GS-X MK2 Thread
I've had mine since Thursday and have been putting some burn-in time. My impressions so far, with a Perfectwave DACII source and balanced LCD 2.2's is that the amp is very revealing of source and music, has the widest and deepest soundstage that I have heard in an LCD, and that it is as...- safeandsound1
- Post #714
- Forum: High-end Audio Forum
-
The HeadAmp GS-X and GS-X MK2 Thread
With these amps getting to us early adopters soon, does anybody have an idea how much burn-in time we should give these puppies before we start to do any critical listening? I usually give a new piece at least 100 hours before judging it but I am used to tube amps. Are solid state amps any...- safeandsound1
- Post #602
- Forum: High-end Audio Forum
-
Head-fi Austin 2013 Impressions
Quote: Um .... thanks .... I guess? I am hoping that you were talking about the rectifier :) http://www.emissionlabs.com/datasheets/EML5U4G.htm- safeandsound1
- Post #134
- Forum: Head-Fi Meet Impressions, Trade Show Reports, Factory Tours
-
Head-fi Austin 2013 Impressions
Quote: I would have gone without the rack if I could have. With my short interconnects and the lack of table space, though, I had to go with the rack.- safeandsound1
- Post #123
- Forum: Head-Fi Meet Impressions, Trade Show Reports, Factory Tours
-
Head-fi Austin 2013 Impressions
I love the PWD quite a bit; I should because I own one :) Like all audio equipment, though, it does have its own sound. One of the quirkier things about a PWD, though is that you can tinker with the sound some by changing the firmware. Some of the versions of the firmware are a little... -
Head-fi Austin 2013 Impressions
It would have been really hard to make a true A/B comparison since the LL2 was being run off of PWD and Ayon CD-1 into the SR-009's all day with $6,000 Jena Labs interconnects and the BHSE was running off of an Oppo SACD player (using cd's) into the SR-007 mk1 headphones. Yes, the LL2 rig... -
The HeadAmp GS-X and GS-X MK2 Thread
For those of you waiting to hear the amp, I've just had a couple of listens at the Austin meet. It indeed has a dead quiet noise floor, drives LCD-3's and HE-6's with ease, and with plenty of detail and resolution. I was impressed with how it seemed to open up the LCD-3's soundstage beyond what...- safeandsound1
- Post #551
- Forum: High-end Audio Forum
-
3rd Annual Austin, Texas Spring Meet - March 2nd, 2013
It's a great meet so far! Cavalli Audio and HeadAmp brought their latest and greatest. The Liquid Lightning 2 and the GS-X mk2 are outstanding!- safeandsound1
- Post #742
- Forum: Local / Regional Head-Fi Meets, Parties, Get-Togethers
-
3rd Annual Austin, Texas Spring Meet - March 2nd, 2013
Alex posted on his LL2 announcement thread that the LL2 will be at the meet. As for the line, I meant a queue at the meet to try out those amps, not in buying them. Quote:- safeandsound1
- Post #712
- Forum: Local / Regional Head-Fi Meets, Parties, Get-Togethers
-
3rd Annual Austin, Texas Spring Meet - March 2nd, 2013
I'm really looking forward to comparing the Liquid Lightning 2 to the Blue Hawaii SE both on SR-009's. I'm sure that there's going to be quite a line for both amps.- safeandsound1
- Post #710
- Forum: Local / Regional Head-Fi Meets, Parties, Get-Togethers
-
The HeadAmp GS-X and GS-X MK2 Thread
I'm going to be at the Austin,TX meet so I will get a chance to hear the GS-X mk 2 and will post my impressions. I bet that Justin will be bringing one with a pot installed and I have ordered mine with the stepped attenuator so I should be able to give a comparison once I get my GS-X in and...- safeandsound1
- Post #547
- Forum: High-end Audio Forum
-
The HeadAmp GS-X and GS-X MK2 Thread
I just really hope to have mine in time to break it in and then bring it with me to the Austin meet in a week and a half.- safeandsound1
- Post #512
- Forum: High-end Audio Forum
-
DAC Popularity Check (2013 Edition)
NOTE: This is to give us a correct tally. Darkkopi and chrislangley4253 posted a tally for the perfectwave dac simultaniously so one of theirs was not counted. USB converters Anedio U2 (1) Audio GD DI-V3+DIPSU (1) Audiophileo (1) Halide Bridge (3) KingRex UC384 32/384 Async USB...- safeandsound1
- Post #139
- Forum: Dedicated Source Components
-
The HeadAmp GS-X and GS-X MK2 Thread
Quote: Is this really a big no-no? I was planning to stack them to save space on my rack. I figured that the two pieces of sheet metal between the transformers and amp should block out any transformer hum. I listen primarily to LCD 2.2's BTW so I may not hear the hum might not...- safeandsound1
- Post #487
- Forum: High-end Audio Forum
-
The HeadAmp GS-X and GS-X MK2 Thread
Quote: These are certainly going to be some of the most beautiful headphone amps ever created. I can't wait to see mine in person!- safeandsound1
- Post #440
- Forum: High-end Audio Forum
-
The HeadAmp GS-X and GS-X MK2 Thread
Justin, any chance we can see what the front panels for the power supply will look like?- safeandsound1
- Post #425
- Forum: High-end Audio Forum
-
DAC Popularity Check (2013 Edition)
USB converters Audiophileo (1) Halide Bridge (1) KingRex UC384 32/384 Async USB Converter with AES/EBU (1) Music Fidelity VLink 192 (2) Stello U3 (2) Yulong U18 Asynchronous 24bit 192khz USB Digital Interface (1) Budget/Entry level (Below $1000): Ack DAC 1.0...- safeandsound1
- Post #98
- Forum: Dedicated Source Components
-
The HeadAmp GS-X and GS-X MK2 Thread
How about: 4-pin XLR, left XLR/ SE 1, right XLR/ SE 2 ?- safeandsound1
- Post #361
- Forum: High-end Audio Forum
-
The HeadAmp GS-X and GS-X MK2 Thread
Any new GS-X progress? Surely something has to be in the works with the front panels by now, right?- safeandsound1
- Post #337
- Forum: High-end Audio Forum
-
The HeadAmp GS-X and GS-X MK2 Thread
I'm just glad that Justin decided to add the 4-pin XLR to the GS-X. The lack of the 4-pin was always one of the things that I didn't like about the old version. I don't want to get too excited as there always seems to be some delay(s) here at the end of the development cycle but it sure...- safeandsound1
- Post #310
- Forum: High-end Audio Forum
-
The HeadAmp GS-X and GS-X MK2 Thread
Quote: Justin, are the front panels the last bit of work needed for the new amps?- safeandsound1
- Post #291
- Forum: High-end Audio Forum
-
3rd Annual Austin, Texas Spring Meet - March 2nd, 2013
I expect that Alex will bring the Liquid Lightning. Do we know what amp Travis will bring? I'd love to hear a Blue Hawaii vs Liquid Lightning head-to-head on the SR-009's.- safeandsound1
- Post #101
- Forum: Local / Regional Head-Fi Meets, Parties, Get-Togethers
-
The HeadAmp GS-X and GS-X MK2 Thread
Quote: We can move the rest of this to PM if you want to keep it as a discussion between the two of us. I do understand that both are differential. I have no problem understanding that both are balanced. I do not read the other thread seeing everyone else believing the same. I just...- safeandsound1
- Post #286
- Forum: High-end Audio Forum