Since I never actually listened to these with the stock pads, I decided to put the stock pads back on. There are pros and cons however.   First off, the ANC is much much much better with the stock pads, much more noise is cancelled either due to the dimensions of the stock pads or how the ear...

The first thing I did when I took them out of the box was to switch to high quality mode as indicated here: http://helpguide.sony.net/mdr/zx750bn/v1/en/contents/04/01/06/06.html   With that being said, aptX is not supported by iPhones anyway so I would not benefit much from that, aside from...

Picked a pair of these up refurbished for quite an insanely good deal, $60 and I also picked up Aureo's extra deep MDR-7506/V6 earpads to make these cans over-ear now instead of on-ear, better sound isolation and much more comfortable.    I would like to beg to differ with the majority of all...

Anyone else notice the WS55 pads really "clarifies" the sound?   I just went back to the original pads after lots of use with WS55 pads to see if there would be any difference, and man the stock pads make everything sound so muddy and the bass super boomy, and they're really quite...

Alright, I've got about 20 hours of burn-in with WS55 pads on. The bass does sound slightly tighter than I recall, and the mids seem to have opened up a bit, as well as the highs.    Honestly not sure how I feel about the WS55 pads, as I didn't have much to complain about as far as the...

Those who think the S500s are basshead cans obviously have never heard what a real basshead can sounds like...

Quote: Actually, it's not bright per se, but with certain sources it sounds quite bright. I guess they're just very sensitive to the source, as well as EQing. Though, of course I listen to all my music with flat EQ. I know it sounds bright with my iPhone 4S, and most other mobile devices...

I finally get to have a taste of the hype! A friend of mine just came back from Japan and brought me a pair of S500s, only $35 when converted from yen!   First impressions: superb build quality, couldn't be better for something in this price range. Is better than many cans a couple times its...

That should be fine.

In most cases higher quality source components, for example an external USB DAC, can make lower-quality recording sound absolutely terrible, worse than they do from onboard audio as their role is to playback the original untampered-with sound it's being fed.

I think I may have been misunderstood. What I meant was, since my DAC does not have volume control built in, is it better to lower volume with the Windows volume in the lower right corner of the screen in the taskbar, or lower the volume through my audio player volume slider in foobar to...

Ah, I see then. I'm just wondering if lowering Windows volume or lowering foobar volume instead, one or the other would allow for a lower noise floor.

Awesome, thanks for the info. Now I will just have to convince myself that the $100 premium on the MX2 is actually worth it over an ODAC, which may better suit my needs as the headphone amp portion of the Audinst is a complete waste for me as I don't use very high impedance cans, and I won't for...

Digital volume control:  Due to my studio monitors having the volume knobs on the rear of each unit, I must use digital volume attenuation as adjusting my monitor volume would be extremely inconvenient requiring me to rotate each speaker around to adjust the volume. Is it best to keep...

I would like my DAC to have volume attenuation built-in, but sometimes I wonder if it's best just to skip all that stuff to avoid possible sources of distortion/another thing breaking down and go with something barebones like a Modi or an ODAC. I need an Audinst owner to confirm 100% than the...

I'm not looking at the MX2, but at the MX1 rather, but the MX1 thread has died quite some time ago. Can any MX2 owner (or ex-MX1 owner?) chime in on the quality of the volume adjustment on the MX2/MX1? I'm looking to use it to power my Fostex PM0.4n monitors via line out, volume adjustment is...

Now I'm debating whether to get the Audinst mx-1 over this, as it has volume adjustment. But would lowering that built in volume adjustment on the DAC lower quality as well, and is it worth the $80 premium? Haven't heard a single thing from any mx-1 owner about how it performs. Decisions...

So all in all, using the volume slider in foobar or the Windows volume control in the right bottom corner of the screen would actually increase or decrease the volume? If so, I'm buying me a Modi 

Quote: I don't believe too much in bit-perfect stuff. I will agree it is true, but for example lowering half the volume of something that reduces bits only reduces SQ by a couple bits, something that is barely perceivable, if perceivable at all.    I'm just wondering if there's some...

Quote:     Mentioned it three posts above...

Quote: Oh really? So if I connect a Modi up to my PC via USB, only a Modi, no Magi, and hook up my studio monitors from the RCA out of the Modi, I can still adjust Windows volume? 

I'm planning to purchase a Modi very soon to replace my PCI sound card to drive my powered Fostex PM0.4n monitors. Since the volume adjustment knobs are on the rear of the monitors, adjusting the volume can be a bit of a huge hassle. Wondering if there's some kind of product that would allow me...

Time to sell the condo lol

Ah that definitely clears things up. I'm not using a subwoofer, just a lowly 2.0 system, however my Fostex PM0.4n studio monitors are arriving next week so I just wanted to figure out if it was possible to somehow calibrate my room setup so that the low frequency sounds would not only be audible...

The title of this thread may be a little wonky, but long story short, my room is a very awkwardly dimensioned, with 9ft ceilings. Somehow I managed to find a blueprint of my floorplan:       Essentially, not limited to my room specifically, all lower registers of bass, all lower bass...