Recent content by kEn ViP
-
the CTH (Compact Tube Hybrid) Rev A thread...
I got 25VAC from the jack. However measurement from the ICP seemed weird The readings kept fluctuating on both the input and output; I couldn't get a stable reading.- kEn ViP
- Post #270
- Forum: DIY (Do-It-Yourself) Discussions
-
the CTH (Compact Tube Hybrid) Rev A thread...
Quote: I'm using the Amperex 6dj8. With tube in, measurements are: + TB+/SG 70.8V + pin 4 and 5 1.9V + pin 1/SG 60.1V + pin 6/SG ~0V Without the tube, the e12 seems pretty stable. Putting the tube in, the LED keeps changing color.- kEn ViP
- Post #268
- Forum: DIY (Do-It-Yourself) Discussions
-
the CTH (Compact Tube Hybrid) Rev A thread...
I'm having an issue with the initial setup. Powering it up, no smoke; LED turned from green to red after 2 minutes and the relay clicked. OG-SG measured 11.71V. OL 11.68v, OR 11.64v. Putting the tube in, TB+ only reads 68.8V. Pin 1 57v. Pin 6 0V. The E12 keeps stripping randomly. Any idea...- kEn ViP
- Post #266
- Forum: DIY (Do-It-Yourself) Discussions
-
iPod Touch USB charge cable?
joneeboi, No I don't use any resistor to get the lineout for my iTouch. It still works perfectly without any resistor. I think the resistor is only for getting rid of the accessory message on iPhone. So basically, I only need 2 pins (1 for G, 1 for 5 VDC) to charge with the USB cable...- kEn ViP
- Post #3
- Forum: DIY (Do-It-Yourself) Discussions
-
iPod Touch USB charge cable?
Hi all, I've just finished my first LOD cable and am thinking of making a LOD that can be charged using USB cable. After searching for a while, I tried pin 13 and 26 with the 5+ VDC and Ground in the USB cable but unfortunately, it still doesn't charge my itouch G2. I wonder if there's...- kEn ViP
- Thread
- Replies: 2
- Forum: DIY (Do-It-Yourself) Discussions
-
Pictures of Your Portable Rig [Part IX]
My little Rig :"> Sony NW- E013F ( not release in the US), the LDM+ and the KSC 75.... With leather case :">, so proud about it.- kEn ViP
- Post #718
- Forum: Portable Source Gear