Listing ID:
16950
Views:
396
450.00 USD
- Condition
- Excellent/Like new
- Negotiability
- Firm
- Ships to
- Anywhere
Custom headphone cable sets with some freebies.
Not separating these unless some one buys the adapter set first.
All together $450 all inclusive to US, international shipping extra. (selling these at about 40% of the material costs, not including labor).
Material: Litz 7N OCC copper with 513 strands per wire.
Oyaide SS-47 4.7% silver solder. heat melt adhesive used to reinforce the soldering joints.
Main cable: 8 wire braid. 4pin XLR male to 2x 4pin mini XLR female (Eidolic connectors on both ends). 2 meter long.
Adapter cables on the amp side: 4pin XLR femal to 2x 3pin XLR male (8 wire braid). 4pin XLR female to 1/4'' male (4 wire braid).
Adapter cables to other headphones: 3.5mm (Sony and newer Hifiman), Mr Speakers/Dan Clark Audio, Focal Utopia, HD800(s).
Free (because of some minor defect) (shown on the 2nd picture)
1: Adapter cable to headphones with dual 2.5mm female. The male side on one cable is a bit loose, i.e. pulls out of the headphone socket with less force than the other side.
2: Adapter cable to HD650/HD6xx. The male side on one cable has some defect (hard to describe but wont affect functionality), also somehow these connectors are very tight when trying to insert into the headphone, so try with care.
3: 4.4mm female to 4pin XLR male (connection issue on the female end, sound lost when the male plug is rotated to certain angle. I tried 3 different 4.4mm female socket made by different manufacturer, somehow this happens to all of them).
Not separating these unless some one buys the adapter set first.
All together $450 all inclusive to US, international shipping extra. (selling these at about 40% of the material costs, not including labor).
Material: Litz 7N OCC copper with 513 strands per wire.
Oyaide SS-47 4.7% silver solder. heat melt adhesive used to reinforce the soldering joints.
Main cable: 8 wire braid. 4pin XLR male to 2x 4pin mini XLR female (Eidolic connectors on both ends). 2 meter long.
Adapter cables on the amp side: 4pin XLR femal to 2x 3pin XLR male (8 wire braid). 4pin XLR female to 1/4'' male (4 wire braid).
Adapter cables to other headphones: 3.5mm (Sony and newer Hifiman), Mr Speakers/Dan Clark Audio, Focal Utopia, HD800(s).
Free (because of some minor defect) (shown on the 2nd picture)
1: Adapter cable to headphones with dual 2.5mm female. The male side on one cable is a bit loose, i.e. pulls out of the headphone socket with less force than the other side.
2: Adapter cable to HD650/HD6xx. The male side on one cable has some defect (hard to describe but wont affect functionality), also somehow these connectors are very tight when trying to insert into the headphone, so try with care.
3: 4.4mm female to 4pin XLR male (connection issue on the female end, sound lost when the male plug is rotated to certain angle. I tried 3 different 4.4mm female socket made by different manufacturer, somehow this happens to all of them).
Listed by:
zmhaha (67)
Listed:
2021-12-26
