Head-Fi.org › Forums › Equipment Forums › Computer Audio › chaintech av710 confusion
New Posts  All Forums:Forum Nav:

chaintech av710 confusion

post #1 of 6
1/5/05 at 12:28am
Thread Starter 
i have just purchased the chaintech av710 to run to my panasonic sa-xr25. i have read and reread the guides and searched for threads about it, but i remain thoroughly confused as to how to get the most of out of this card.

should i flash to the prodigy firmware and run the optical out to the optical in on my receiver? or would it be better to utilize the dac on the av710 and use the jack next to the optical out?

please help, doing searches has only confused me and opinions would be appreciated.
Reply
post #2 of 6
1/5/05 at 2:10am
http://www4.head-fi.org/forums/showthread.php?t=75655
Reply
post #3 of 6
1/5/05 at 2:25am
with an xr25 your best bet would be to keep the signal bit perfect and digital going into the xr25 since it utilizes digital amp's your best bet would be to keep the signal in the digital domain as long as possible with as few conversions as possible.
Reply
post #4 of 6
1/5/05 at 2:34am
Thread Starter 
Quote:
Originally Posted by Snoodge
with an xr25 your best bet would be to keep the signal bit perfect and digital going into the xr25 since it utilizes digital amp's your best bet would be to keep the signal in the digital domain as long as possible with as few conversions as possible.
so i should just leave the signal at 44.1khz and avoid upsampling?
Reply
post #5 of 6
1/5/05 at 2:45am
Quote:
Originally Posted by futangclan
so i should just leave the signal at 44.1khz and avoid upsampling?
Yes that is correct.
Reply
post #6 of 6
1/8/05 at 4:07pm
I had an XR45 that worked better with upsampling via Monarchy Audio DIP Upsampler. I would say try both settings and see what you like.
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Audio
Head-Fi.org › Forums › Equipment Forums › Computer Audio › chaintech av710 confusion