or Connect
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Post pics of your builds....
New Posts  All Forums:Forum Nav:

Post pics of your builds.... - Page 648

post #9706 of 9715
Quote:
Originally Posted by funch View Post
 

http://www.frontpanelexpress.com/

 

 

Quote:
Originally Posted by DutchGFX View Post

That ^^ or you can do it yourself with a CNC machine

Thanks so much !

post #9707 of 9715
Quote:
Originally Posted by macm75 View Post

The circuit is dsavitsk's Electric Avenue - http://diy.ecpaudio.com/2008/03/SSS.html 



I didn't see this when you posted. Very cool smily_headphones1.gif
Quote:
Originally Posted by Sko0byDoo View Post


Nicely done...Get the matched Lundahl covers, then everything is super sweet!



Yes on the covers.
post #9708 of 9715

Could someone point me in some direction on how to build a notch filter to tame treble 2-3dB?

 

I have those headphones on my avatar but they are a bit too bright. It needs to be hardware, cause I use software that uses asio drivers, gaming etc so I can't have eq in those.

 

can't buy an amp/dac either, because sound has to come out of my pc mixer or dac. 

post #9709 of 9715

I knew it no one on this forum actually knows nothing

post #9710 of 9715
What frequency do you want to tame from? You could build an RC filter. That would likely do the trick. I havent ever worked with filters but I don't see why you couldn't just make a nice RC

The reason noone answered is that most folks here don't believe in EQ, they believe if you need tk EQ, you need new gear lol
Edited by DutchGFX - 8/27/15 at 5:23am
post #9711 of 9715
Quote:

The reason noone answered is that most folks here don't believe in EQ, they believe if you need tk EQ, you need new gear lol

 

 

No, Google plus 4 seconds and he could find his own friggin answer.

You know the part about doing in Doing It Yourself. :tongue:

 

http://www.ti.com/general/docs/litabsmultiplefilelist.tsp?literatureNumber=sloa093

post #9712 of 9715
Quote:
Originally Posted by MisterX View Post


No, Google plus 4 seconds and he could find his own friggin answer.
You know the part about doing in Doing It Yourself. tongue.gif

http://www.ti.com/general/docs/litabsmultiplefilelist.tsp?literatureNumber=sloa093

Fair point indeed sensei.
post #9713 of 9715

  the best i can do is this url ,than go to the headphone portofolio  https://grabcad.com/selwin.lisand-1 

post #9714 of 9715

post #9715 of 9715




Here is my first real project. This is a NP-100 v12 amp with built in power supplies. I have one transformer supplying the tube heater, and the other supplies the MOSFETs and the tube. Both supplies gonthrough full wave bridge, 4700uF caps, and then LM 317's set to 12.6 and 12 V. The corners are solid cherry wood, and the ply is 1/4 inch oak. I have a metal case on the inside for some EMI shielding.
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Post pics of your builds....